Thor » HD Video Audio Over Fiber » HDMI over Fiber | HDMI fiber extender |
The F-HDMI transmitter and reciever pair are used to carry HDMI video signals over longer distances. These units make long distance transportation of HDMI video over fiber easy. An HDMI signal connected to the F-HDMI transmitter is converted to an optical signal for transmission over a fiber optic cable. The F-HDMI reciever then receives the optical signal and converts it back to HDMI video. Fiber optic cables can transport signals to incredible distances, up to 50 miles for single mode fiber. HDMI video cables are expensive and have a very limited range, typically less than 50 ft. Longer runs of HDMI cables also experience significant distortion of the signal. The F-HDMI system allows a user to transport full uncompressed HDMI video at 1080i/1080p with up to 8 incorporated audio signals over a simple and inexpensive fiber optic cable. A simple passive DVI to HDMI adapter can also be used to transport DVI signals over the fiber. The receiver also features two outputs, adding to the versatility of this system. The F-HDMI offer an excellent solution for moving an HDMI signal from one place to another.
Features
• Simple to read input and output signal indicators
• Supports HDTV resolutions up to 1080p
• Supports computer display resolution up to 1920/1200@60Hz
• Transmission distances of up to 50 miles possible with single mode fiber
• Easy setup with Plug and Play interfaces
• Supports DVI and VGA signals through an HDMI adapter

| Video Parameters | |
| Resolutions | 720p?1080i?1080p 800*600 to 1920*1200 |
| Interface | Supports HDMI Interface with HDCP Function |
| Audio Parameters | |
| Working Mode | Un-balance (stereo) |
| Input/Output Impedance | 10k/50 Ohms?stereo) |
| Max Input/Output Power Level | 5 dBu/4Vpp (stereo) |
| Characteristics of Frequency | 20Hz ~?20kHz @ -3dB |
| Signal to Noise Ratio | >70dB @ 1k Hz (stereo) |
| Interface | 3.5 mm |
| Physical Parameters | |
| Dimensions | H×W×D 170*100*35 mm |
| Power Supply | 12VDC @ 1.5A |
| Working Temperature | 0 ? +50 C |
| Relative Humidity | 0 ? 95% non-condensing |
| Optical Parameters | |
| Optical Fiber | Complies with IEEE802.3zin in 1000BASE_LX |
| Optical Wavelength | 1310 nm |
| Rate of Emission | -9.5 ? ?3dBm rate of emission for balance optical signal @1310nm |
| Optical Receiver Sensitivity | -23dBm balance optical rate @1310nm |
| Output Optical Modulation | 180 μW |
| Input Optical Modulation | <15 μW |
| Relative Speed | -116 DB/Hz |
| Return Wave Loss | <10 dB |
| Rate of Transmission CDE | 240M Hz ? 1.65G Hz |
| Transmission Distance | 1m?~500m for multimode optical?1m?~20km for single mode |
| Physical Dimensions | H×W×D 170*100*35 mm |
| Performance Parameters | |
| Optical Fiber Mode | Single mode |
| Quantity of Optical Fibers | 4, or 1 (Optional) |
| Optical Connector | SC |