back

RF CATV Mini Optical Receiver

Name: RF CATV Mini Optical Receiver
Brand: Thorbroadcast
Price: 495 USD
Availability: InStock

F-RF-RX-MN

Qty: 10

ask about product

send request

Description Features Drawings Video Specification Documents Support

Description

Compact CATV RF Over Fiber Receiver

The Thor F-RF system is using for the transport and distribution of CATV RF signals over fiber optic cable. The transmitter converts the incoming RF signal (870 MHz) to an optical signal. This optical signal can be distributed to multiple end points with a coupler, or can be run more than 20 miles over a single-mode fiber optic cable. Often times a full-size rackmount receiver is not needed at the endpoints. The CATV mini receiver is used as a low-cost end point when rack equipment is not needed. The units have adjustable RF output level to drive multiple displays and ship with robust external power supplies. These units can also be used to make low-cost 'Fiber Breaks'. A Fiber Break allows RF to pass in only one direction and are essential for high-level data security. Without an RF return path, the system cannot be modified to extract data over an RF line.

Features

• Optical Automatic Gate Control (AGC)
• Able to receive optical signals in either 1310nm or 1550nm bands.
• All working parameters controlled by a microprocessor
• Compact Form Factor
• Adjustable RF Output power
• No need to program parameters

IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.

If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.

Drawings

Application Examples

CATV RF QAM over fiber transport over single mode fiber cascading solution

Video

Thor Fiber Optic To Coax Cable - Send a TV Antenna signal though Fiber Optic Cable!

In this video we look at making my over the air ATSC antenna feed and Master Antenna system converted to a Fiber Optic cable and then converted back to coax cable. Thor Optical Mini CATV RF Transmitter 45-1000Mhz The Thor Fiber Optical Mini CATV RF 45-900Mhz Transmitter is mainly used for transmitting long distance optical fiber transmission of CATV RF - Analog or digital QAM or ATSC Television Digital TV, telephone and data transmission. It's application for digital signal transmission of video and data in the cable television and communications industry. The transmission range can vary from 5km to 30km. It comes equipped with an advanced DFB laser that readily provides expectionally high performance and RF power, as well as automatic processing technology developed by our company. Finally it has a built-in micro-computer that automatically monitors the control system and guarantees excellent performance of the equipment. Features 45 -1000MHz working bandwidth High performance DFB coaxial laser that has a great linking performance and stable output Advanced CPU processing and with an auto monitoring system to supervise the operational status which leads to a longer life of the laser Low power loss design(less than 8W) which creates a ver low operational temperature IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion. https://thorbroadcast.com/product/thor-optical-mini-catv-rf-transmitter-45-1000mhz.html ------------------------------------------------------------------------ Thor Fiber Optical Mini FTTH RF CATV CABLE TV Receiver with Dual Coax Output F-RF-RX-MN-2 Description The Thor Fiber Mini FTTH optical receiver F-RF-RFMN-2 is specifically designed for FTTH networks. These ultra compact Fiber-To-The-Home optical receivers were designed and engineered to ensure compatibility for any type of FTTH network structure in mind. It has small compact housing, mini-internal circuit structure that still remains a high performance, low cost receiver that is economical for any project. It can be used for any application of HFC network fiber to the home (FTTH) because of it's form factor and output power. These units have a wide range for receiving optical power, high output level and low power consumption. They are the ideal pieces for any optical fiber network which can provide a highly reliable, digital video frequency and data bi-directional transmission for the HFC network. It could be use to send CATV RF point to point or point to multipoint. This unit comes in a kit: part of the Thor Fiber MIni Transmitter / Receiver kit with F-RF-TX-MN-2Mw Features Designed for FTTH (Fiber To The Home) Networks Excellent linearity and flatness Converts Optical siganl to electrical RF 45-10000Mhz Analog NTSC/PAL, Digital QAM, ATSC, DVB-T , 20dBmV RF ouput power at Optical Input: -0 dBm Dual Coaxial ouput for easy deplyment for multiple devices Wide range of optical input power Single-mode fiber Ultra low noise technology Smaller size and easy to install Red-LED for power indication Color-LED for optical power indication Built-in filter IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion. https://thorbroadcast.com/product/thor-fiber-optical-mini-ftth-rf-catv-cable-tv-receiver-8230.html +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Need a VPN Using the Express VPN Service Please Sing up here and Click on my referral link. https://www.linkev.com/?a_fid=freesatellitetv +++++++++++++++++++++++++++++++++++++++++++++++++++++++ If these Videos help you please consider suporting my work https://www.paypal.com/donate/?token=QKzEirXJqq0FTbnGEmr3zZUYnrEJk9b7E5JktI6qe_RWThkac4gqudDIUwhd7Ugo-cMjfm&country.x=CA&locale.x=CA https://www.patreon.com/RobbieStrike Learn about Satellite and other things by sitting back and binging on these playlists https://www.youtube.com/user/ottawaoctane/playlists https://www.youtube.com/user/ottawaoctane/videos https://www.facebook.com/RobbieStrikeVideos/ https://twitter.com/robbiestrike3 (c) Robbie Strike 2020 http://www.RobbieStrike.com www.FreeSatelliteTV.net

Specification

*All Specifiactions Subject to Change Without Notice
Optical Features
Wavelength	1310 - 1568 nm
Linewidth	< 1 MHz FWHM
Side Mode Suppression Ratio	> 45 dB SMSR
Return Loss	> 55 dB
Optical Fiber Connector	SC/APC Standard IMPORTANT NOTE* (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.**
RF Features
Work Bandwidth	45 - 862 MHz
Input Level	19 - 21 dBmV MGC
Flatness	<± 0.75 45 - 862 MHz
Return Loss	> 16 dB
Input Impedance	75 Ohm RF Input
RF Interface	F-Type or by request
Link Features
Transmit Channel	PAL-D/60CH NTSC/80CH
CNR	> 50 dB on 10Km optical fiber
CTB	< -63 dB
CSO	< -57 dB
SBC restrain	> 17 dBm
General Features
Network Managment	RJ45 & RS232 Supports I.E. & SNMP
Power Supply	90~265VAC -48VDC optional(30~60VDC)
Power Consumption	< 50 W
Working Temp	-5°C - 65°C
Storage Temp	-40°C - 85°C
Operating Humidity	5 - 95 %

Documents

User's Manual is avalible only for logged users.

Availability:	In stock	Condition:	new
Shipping:	starting at $22.00	Warranty:	1Yrs