1310nm - 16mW fiber optic transmitter for Television RF (Radio Frequencies) from 45-870 MHz. Directly converts any incoming RF signal within this band to optical RF. Transports all channels and programs over one fiber. Can be used for point to point, or combined with PLC couplers and fiber optic splitters for point to multipoint applications. Outputs Industry standard RFoG (RF over Glass) signals that can be accepted by most fiber optic RF receivers from other manufacturers. Easy to read front panel LCD provides information and alarm data, and simplifies configuration. This system features a highly linear DFB laser with automatic adjustment circuitry with Automatic Gain Control. For added reliability, a second internal Power Supply Unit is available as an option.
Transmitter can be used with any or Thor Fiber optical RF receivers
• 16 mW Optical Power Output from sensor feedback controlled laser system
• Transports entire 45-870 MHz band even with full channel linups
• Create high security "Fiber Breaks" to eliminate coax signal return path
• Automatic Gain Control (AGC) manages RF level with no adjustment needed
• Compatible with all Thor RFoG CATV series optical receiver systems
IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.
If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.
| *All Specifiactions Subject to Change Without Notice | |||
|
1x Type-F connector - 75 Ohm |
||
|
1310nm | ||
|
< 1 MHz FWHM | ||
|
>20 dB XP | ||
|
< -160 dB/Hz | ||
|
16 mW | ||
|
>55 dB | ||
|
SC/APC - Angle Polished IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion. |
||
|
11-29 dBmV AGC Managed | ||
|
<± 0.75 45 - 862 MHz | ||
|
>17 dBm | ||
|
>50 dB @ 10km fiber length | ||
|
< -63 dB | ||
|
< -57 dB | ||
|
19 x 10 x 1.75 inch | ||
|
2.5 kg | ||
|
0 - 45 ? | ||
RF Fiber Break - optical RF COAX isolation solution
Low Cost RF Fiber Break system for high security RF feeds. For short distance transport over fiber and for RF security to prevent any RF leaks. Prevents Coax from being used to transmit data in the return direction, using a Fiber Break Kit eliminates any possibility of your copper transmission returning on RF. Kit includes Transmitter, Fiber Jumper, and mini-Receiver.
4 Ch Cable TV Return Path Receiver
4 Channel Return Path CATV RF Optical Receiver 5-200Mhz, Fiber to Coax Excellent linearity and flatness Extremely good return loss >45 Automatic Gain Control Dual Power Supply Easy to read LCD display - RF & Fiber power level diagnostics Wideband 5-200 Mhz input range 1RU for easy install Independent Return Paths Optical Range, AGC Range -10~0 Full Thor Fiber Warranty - No Worry Guarantee
ES
