K-BAND over Fiber

F-KBAND
Qty: 0
Availability: Check availability Condition: new
Shipping: starting at $10 Warranty: 2Yrs
ask about product
send request
Description Features Drawings Model Selection Specification Documents Support
Description

F-KBAND  25 GHz Wide Band K Band Over Fiber Optic Transceiver

The F-KBAND series wide band laser transceivers are designed for enabling a high linearity optical link for RF over fiber in the K-BAND up to 25 GHz.  The unit can also be used as a repeater for extending the transmission distance of a 30 Gb/s link.  The F-KBAND incorporates a broadband optical transmitter and linear receiver into a compact rack mounted unit.  The F-KBAND can be used for carrying almost any type of RF modulated signals such as RF over Fiber (RFoG), satellite/IF link, WiMax optical link, microwave over fiber, and mobile signals in fiber.  The unit uses a lithium-niobate external modulator to convert input microwave/RF signals to optical waveforms from a frequency range of 100 kHz up to 25 GHz.  The F-KBAND maintains excellent gain flatness over a wide frequency range due to a very narrow line width DFB laser.  K Band over fiber transmission distances of up to 120 km are possible using singlemode optical fiber.

Features

 • Useful Bandwidth up to 20 GHz
 • K Band Over Fiber for links up to 120 km
 • Highly Linear for Analog Transmission
 • Low RIN, Narrow Linewidth DFB Laser
 • Broadband LiNbO3 Modulator
 • High Power Linear PIN reciever
 • Optional RF amplifier to enhance gain

Drawings
Model Selection
Model Number Description  
  • F-KBAND-Tx-10
K-BAND Singlemode Fiber Transmitter for 10km  
  • F-KBAND-Rx-10
K-BAND Singlemode Fiber Reciever for 10km  
  • F-KBAND-Tx-40
K-BAND Singlemode Fiber Transmitter for 40km  
  • F-KBAND-Rx-40
K-BAND Singlemode Fiber Reciever for 40km  
  • F-KBAND-Tx-80
K-BAND Singlemode Fiber Transmitter for 80km  
  • F-KBAND-Rx-80
K-BAND Singlemode Fiber Reciever for 80km  
  • F-KBAND-Tx-120
K-BAND Singlemode Fiber Transmitter for 120km  
  • F-KBAND-Rx-120
K-BAND Singlemode Fiber Reciever for 120km  
Specification
*All Specifiactions Subject to Change Without Notice
  • Frequency Range
15.0 - 30.0 GHz
  • Out of Band Rejection
>70 dB
  • Flatness
± 0.2 dB / 48 MHz
± 0.7 dB / 500 MHz (typ.)
± 1.0 dB / Full band (typ.)
  • Intermodulation
 -50 dBc (max.), -55 dBc (typ.)
  • CNR
(36 MHz BW) >50 dBc

Input Signal

 
  • Low Gain Setting
-25 to -40 dBm
  • High Gain Setting
-10 to -40 dBm
  • Gain Stability @ Constant Temp
± 0.15 dB / 24 hours
OIP3 (from min to max gain)  
  • Low Gain Setting
-15 to 0 dBm (typ.)
  • High Gain Setting
0 to +15 dBm (typ.)
  • Noise Figure @ max input gain
 
Low Gain Setting <22 dB (typ.)
  • High Gain Setting
<9 dB (typ.)
  • Group Delay Variation
Peak to peak 0.4 ns (typ.)
  • Input/Output Impedance
50 Ohm
  • Input/Output VSWR
1.4:1
Maximum RF Input (with no damage)  
  • High Gain Setting  
-10 dBm
  • Low Gain Setting 
+5 dBm
  • Gain Control Manual front panel
standard
  • Test Port Coupling
20 dB ± 1.0
Documents
Similar products:

T1 or E1 Carrier Signal over Fiber or IP

Bi Directional Transport of up to 16 T1 or E1 Carrier signals over IP Based Networks.

HD Video to 8VSB Modulator

Modulation of all HD signal types to an off air compatible 8VSB modulated channel.

Contact Us

Thor Broadcast Sales


Customer Service/ Support