The H-ASI-AMP is a signal distribution amplifier for ASI or SDI signals. We built an ASI distribution amplifier unit with 2 to 16 outputs. The units accepts ASI and SDI signals at any bitrate. A key feature of our H-ASI-AMP is that the outputs are reclocked, this resolves any issues with signal jitter and provides a clean output. This not only improves the quality of the incoming signal, it allows for much longer cable runs from the outputs. The H-ASI-AMP is a perfect solution for distribution of transport stream signals from devices such as encoders or servers. With a distribution amp such as this the output signal from an ASI multiplexer can be amplified for distribution to many different devices.
| *All Specifiactions Subject to Change Without Notice | |||
|
ASI Input |
|||
|
Input Connector |
2x ASI input, BNC(75) According with EN50083-9 ASI Connector SMPTE259M standard, SDI Video signal Reflect impedance: <15dB@270MHz |
||
|
ASI Output |
|||
|
Output Connector |
8(ASI5108) or 16(ASI5116) ASI Outputs, BNC(75) According with EN50083-9 ASI Connector standard,SMPTE259M standard,SDI Video signal |
||
|
Reflect impedance |
<15dB@270MHz | ||
|
Lower residual jitter |
180PSpp@270MHz Equalizer | ||
|
Re-clocked |
130pbs | ||
|
Output Level |
800mV±10% | ||
|
Environmental |
|||
|
Power Supply |
AC 110-220V 50/60Hz | ||
|
Power consumption |
20W | ||
|
Operating temperature |
-10-50°C | ||
|
Storage temperature |
-10-75°C | ||
|
Dimensions |
318mm( L)X 483mm(W)X 44mm(H)(1RU) | ||
|
Weight |
3.5kg | ||
HDMI Repeater amplifier with HDCP
The Thor H-HDMI-DA is a single HDMI repeater booster, HDCP manager It is designed to extend any HDMI source allowing the HDMI transmission distance to increase up to 15m.
8 DVB ASI Mux Over IP Gateway
Bi Directional Transport of up to 8 DVB-ASI streams over IP Based Networks
ES
