1 L-Band LNB Dish over fiber Extender with Outdoor Enclosure

Name: 1 L-Band LNB Dish over fiber Extender with Outdoor Enclosure
Brand: Thorbroadcast
Price: 2495 USD
Availability: InStock

F-LB11-TxRx

Qty: 0

ask about product

send request

Description Features Drawings Specification Q&A Support

Description

F-LB11 Weatherproof Outdoor L-Band Kit

Ruggedized environmentally hardened optical transmitter and receiver kits

These single channel L-Band over fiber kits offer the same link performance as standard Thor F-LBAND systems, and are suitable for outdoor installation. Ideal for mounting on antenna masts, or in base station equipment racks; F-LB11 single channel kits can be installed in locations directly exposed to the elements.

Features

Can be installed in any location indoors or out
Allows optical transmitter to be mounted closer to the antenna
Fully sealed enclosure can be installed directly on antenna
Can be ordered for specific frequency range response
Wide use of applications, bi-directional models available

IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.

If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.

Drawings

Specification

*All Specifiactions Subject to Change Without Notice
Transmitter Properties
Wavelength	1310 nm (standard) 1550 nm (optional) FP/DFB
Output Power	+2.0 dBm +/- 2 dB
Frequency Response Range	45 - 2800 MHz
RF Input Level	55 - 78 dBµV
LNB Power (optional)	13 or 18 VDC /650mA Max 22KHz
RF Connector	F-Connector or by request
RF Return Loss	13 dB
RF Input Impedance	75 Ohm
CNR	40 dB
IMD	40 dB
Reciever Properties
Wavelength	1290 - 1600 nm
Optical input power range	-13 - 1 dBm (sensitivity -13 dBm)
Frequency Range	900 - 2600 MHz
Output RF Response Levels
Optical Input = 0 dB	RF Output = 88 dBuV
Optical Input = -3 dB	RF Output = 82 dBuV
Optical Input = -6 dB	RF Output = 74 dBuV
Optical Input = -9 dB	RF Output = 68 dBuV
Optical Input = -12 dB	RF Output = 63 dBuV
General Parameters
Power Supply Info	18VDC, 3.5W
Tempurature Range	(-45) - 150 F
RF Connectors	F-Connector
Optical Connectors	SC/APC IMPORTANT NOTE* (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.**
Dimensions	118 mm x 210 mm x 40 mm
Weight	0.25 kg

Question and Answers

Question:
We recently purchased one of your F-LBAND Single Fiber RFoG Tx/Rx Kits and would like to know, what is the maximum allowable DC voltage on the RF Coax "F" input and output center conductors? We presently have 13Vdc present on the coax cable's "F" center conductor and need to know if it's necessary to block this DC voltage?

Answer:
No, you do not need to use DC Blocker, the unit is internally protected via a capacitor, Those individual L-band kits have a little switch on them; you can choose 13v, 18v, or 0. If you have voltage going to your system already then than please set TX to " 0."

Availability:	In stock	Condition:	new
Shipping:	starting at $22.00	Warranty:	2Yrs