This is a terrific solution for capturing up to 16 HD HDMI signals from any source and modulating them into agile analog channels. It offers a simple and easy way to distribute high-definition signals to legacy TV distribution systems. Equipped with a pre-programmed channel list and the ability to set up any of those channels anywhere in the spectrum, operators can quickly and efficiently configure the modulator.
This modulator is particularly unique because most Analog Modulators on the market require CVBS input. In many cases, HDMI sources would need to be externally converted to CVBS. Our device handles this conversion internally, allowing you to use any SD/HD HDMI source, which is then converted to baseband video and modulated to the Analog channels of your choice.
Moreover, this modulator is HDCP compliant and works seamlessly with any HDMI sources. Additionally, it includes a network port for NMS, enabling remote access and management.
H-16HDMI-RF-AMOD - 16 HDMI Inputs - 16 Analog RF Out (NTSC)
H-16HDMI-RF-AMOD-PAL - 16 HDMI Inputs - 16 Analog RF Out (PAL)
Similar model but with HDMI inputs:
H-16RCA-RF-AMOD - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator
H-16RCA-RF-AMOD-PAL - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator
|
INPUT |
|||||
|
Input Connector Management |
HDMI x 16 Front Panel Buttons and LCD and NMS IP - 10/100 Ethernet, DefaultIP 192.168.1.30 |
||||
|
VIDEO |
Input Resolution |
1920*1080_60P; 1920*1080_50P; 1920*1080_60i; |
|||
|
1920*1080_50i; 1280*720_60P; 1280*720_50P |
|||||
|
OUTPUT |
|||||
|
RF |
Output Connector |
F-Female @ 75ohms |
|||
|
Output Frequency |
45 ~ 870 MHz |
||||
|
Output Level |
110 dBμV = (+50dBmV ) |
||||
|
Adjust Range |
0 ~ 20dB |
||||
|
Output-band Rejection |
≥ 60dB |
||||
|
GENERAL |
|||||
|
Power Supply |
AC 90 ~ 264V @ 47~63Hz |
Power Consumption |
<100W |
||
|
Cooling Fans |
3 |
Dimension |
48.4*32.9*4.44 (CM) |
||
|
Shipping Weight |
6.5 KG |
Carton Size |
55*39*13 (CM) |
||
MaximusControl - Professional Grade Video PTZ Controller Sale
The Thor MaximusControl is the essential accessory for your Thor PTZ Camera. This control center is a professional-grade video PTZ controller with built-in support for VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control can independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, allowing you to adapt and control cameras from various manufacturers using the same controller. It can simultaneously control PTZ functions for up to 7 different cameras and protocols.
HDMI Modulator with return remote control IR - Digital Full HD 1080p ATSC, QAM J.83B, DVB-T, ISDB-T over Coax Sale
The H-HDMI-RF-Petit-IR is a compact universal digital QAM, ATSC RF encoder, and RF modulator with an IR return path and HDMI loop-out for controlling HDMI video sources remotely over coaxial cables. For example, the modulator and cable TV box HDMI source can be located in one place. Users can then send commands from the set-top box (STB) remote control to change the channel on the STB from any other location where the TV is connected over the coaxial network. The modulator sends RF channels to all TV locations, and the IR function allows communication from the TV to the STB over the same coaxial wiring.
EN
