User's Datasheets - Thor Broadcast

Analog Audio Video

The F-2V4A-TxRx-RM is a broadcast quality 2 channel baseband, composite video to fiber multiplexer. We can customize the unit with different lasers for the video to fiber to distances up to 120 Km.

• DataSheet

Broadcast quality F-8V16A-TxRx-RM is an 8 channel composite video / audio over fiber transmission system. We can customize the unit with different lasers for video over fiber distances up to 120 Km.

• DataSheet

The F-4V8A-TxRx-RM is a 4 channel broadcast quality composite video to fiber multiplexer. We can customize the unit with different lasers for video/audio over fiber for distances up to 120 Km.

• DataSheet

Universal and flexible CWDM / DWDM optical Multiplexing system for multiple Video, Audio, Ethernet, Gigabit, 10G, ASI, SDI, HD-SDI, RS232, RF, L-band over a single fiber

• DataSheet

The F-1V2A1ASI is a Baseband Analog Video / Audio and Digital Video / Audio - SDI or ASI fiber optic transmission system over single fiber. It multiplexes video, Audio, SDI, or ASI and sends it over 1 strand of fiber for up to 120KM

• DataSheet

Broadcast quality F-16V32A is a 16 channel composite video /Audio over fiber multiplexer. We can customize the unit with different CWDM /DWDM lasers for transmission distances up to 120 Km.

• DataSheet

Cable TV CATV RF 45-900Mhz

Coax Cable over fiber - Uniquely designed Bidirectional CATV over Fiber Set. It was designed to replace Point to Point Coax cable since CATV requires bi-directional communication, this transceiver units provide service over Coax cable that have 2 different components (CATV + Internet)

• F-RFoF-TX/RX - TECHNICAL DATASHEET

Compact Clam Shell Outdoor Weather Proof RF CATV Fiber Optic Receiver 45-1000Mhz with dual RF F-Type connector outputs for easy distribution into any RF architecture design

• F-NODE TECHNICAL DATASHEET

Thor Fiber Optical Mini FTTH Receiver to convert an optically modulated signal to Coax - electrical CATV RF or QAM / ATSC signal 45-1000Mhz - RF over fiber mini optical receiver - converter

• F-RF-RX-MN-2 TECHNICAL DATASHEET

The Thor Fiber Optical Mini CATV RF 45-1000Mhz Transmitter is designed to transport Analog RF or digital QAM/ ATSC modulated signal up to 10Km

• F-RF-TX-MN-2mW TECHNICAL DATASHEET

1550nm DWDM Externally Modulated Optical Transmitter is an ideal solution for long-distance Analog RF or Digital QAM /ATSC from 45-1000Mhz over single mode fiber. It has much better dispersion and stability than a 1550nm internally modulated fiber optic transmitter, If your fiber distance exceeds more than 30km this is the perfect product for your application.

• F-RF-1550-Tx-EM-2 - TECHNICAL DATASHEET

4 Channel Return Path CATV RF Optical Receiver 5-200Mhz, Fiber to Coax Excellent linearity and flatness Extremely good return loss >45 Automatic Gain Control Dual Power Supply Easy to read LCD display - RF & Fiber power level diagnostics Wideband 5-200 Mhz input range 1RU for easy install Independent Return Paths Optical Range, AGC Range -10~0 Full Thor Fiber Warranty - No Worry Guarantee

• F-RF-RP4RX - TECHNICAL DATASHEET

32 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. 1550nm Optics for C-Band comparability with EDFA Optical Amplifier systems.

• F-RF-1310-TX-32mW - TECHNICAL DATASHEET

16 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX-16mW - TECHNICAL DATASHEET

8 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX-8mW - TECHNICAL DATASHEET

Low Cost RF Fiber Break system for high security RF feeds. For short distance transport over fiber and for RF security to prevent any RF leaks. Prevents Coax from being used to transmit data in the return direction, using a Fiber Break Kit eliminates any possibility of your copper transmission returning on RF. Kit includes Transmitter, Fiber Jumper, and mini-Receiver.

• F-RF-BR - TECHNICAL DATASHEET

4 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX-4mW - TECHNICAL DATASHEET

RF Fiber Mininode for fiber to the home applications. RF ONU for FTTx based systems.

• F-MININODE-2RT - TECHNICAL DATASHEET

This is a CATV fiber optic receiver for transporting RF signals in the 40-870 MHz range. The unit can accept optical signals in all bands.

• F-RF-RX-RM - TECHNICAL DATASHEET

Internally modulated 2-8 mW Fiber Optic RF CATV Analog or Digital QAM ATSC Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. 1550nm Optics for C-Band comparability with EDFA Optical Amplifier systems.

• DataSheet

The Thor 40db CATV Distribution Coax Amplifier supports 54-1000mhz -Analog RF, Cable QAM, ATSC, DVB-T, ISDB-T 19" rack-mountable - Bi directional

• H-RF-AMP-40-RM - DATA SHEET

Data & Ethernet

Compact 10/100 Ethernet to fiber media converter. Copper RJ45 Ethernet to duplex SC fiber connector, fully compliant with IEEE 802.3 and 802.3u Fast Ethernet standards, 10/100Mbps Auto Negotiation, Auto cross over for TP port. Single Mode and Multi Mode models available

• F-FE-TR datasheet

1 -2 Channel telephone over fiber transceiver for secure telephone lines. These units transport the phone signal over fiber optic cable and are impossible to tap.

• DataSheet

4 Channel telephone over fiber transceiver for secure telephone lines. These units transport the phone signal over fiber optic cable and are impossible to tap.

• DataSheet

Transport of E1 or T1 carrier signals over fiber is possible with these units. Transport distances of up to 150 Km is possible with custom optics.

• DataSheet

Card Modules for Gigabit Ethernet, 10/100 Ethernet, T1/E1 Lines, or RS-232 for Fiber Optic Chassis System

• DataSheet

DVB - ASI

8 channels of DVB-ASI or SD-SDI serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high-density systems.

• DataSheet

1 channel of DVB-ASI or SD-SDI serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• DataSheet

The F-1V2A1ASI is an Analog and Digital video over fiber multiplexer. It optically transports 1 channel of composite video 2-8 Audio + 1 SDI or ASI over a single fiber optic line. We can also incorporate more channels upon request

• DataSheet

4 channels of DVB-ASI or SD-SDI serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• DataSheet

DVB-S/S2 Satellite Modulators

HD-SDI Encoder + DVB-S/S2 Modulator. Encoding HD digital video inputs to MPEG-2 or H.264 transport streams, output modulated to satellite carrier or IF.

• DataSheet

HDMI

Converts one to four HDMI digital video inputs to RF ATSC off Air channels. Outputs ASI, IP, & RF in 8VSB ATSC format for US Over the Air OTA. Encodes as a MPEG-2 or H.264 video and MPEG1 or Dolby AC3 Audio, HD 720p/1080i/1080p

• Data Sheet

Converts one or more HDMI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in QPSK DVB-T for European Television Systems. HDTV channel distribution over existing antenna coax cable for easy and simple implementation, HD 720p/1080i/1080p

• Data Sheet

The Thor Broadcast H-2ADHD compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. Easy to use NMS GUI interface lets you adjust and manipulate any settings via any web browser for full autonomous control of the encoder. Supports full HD 1080p60 encoding from any source that uses HDMI. The H-2ADHD carries both modulation standards for both QAM and ATSC that are easy to switch between with a simple dropdown menu option inside the GUI. Supports QAM, ATSC ,DVB-T, ISDB-T modulations - it is selectable

• H-2ADHD-QAM-IP-LL Datasheet
• H-2ADHD-QAM-IP-LL Specsheet

Converts 1-4 HDMI digital video inputs to Coax - CATV US Cable format or DVB-C Encoding: HDMPEG-2 or HD H.264 streams. Outputs : RF in QAM-256 J.83A/B/C & ASI & IP UDP,RTP/RTSP, HD 720p/1080i/1080p

• Data Sheet

The H-16HDMI-RF-AMOD is a 1RU rackmount HDMI input, agile modulator, that will convert all of your 16 HDMI SD HD inputs into NSTC/PAL/ SECAM analog RF Channels

• H-16HDMI-RF-AMOD DATA SHEET

Professional 16 Channel Analog Baseband CVBS Video Audio to CATV RF NTSC Analog Modulator - NTSC PAL SECAM in 19" rack The unit has 16 Analog CVBS Baseband Video Audio RCA Inputs, analog modulated agile channels can be selected individually across CATV RF spectrum from 45Mhz - 860Mhz

• H-16RCA-AMOD DATA SHEET

IP Network Encoders

The F-DVI-TX/RX is a perfect solution for HDMI, DVI, VGA with USB, IR, RS232 over IP based SFP Optical Module. The system includes a transmitter (TX) and Receiver (RX). Unit has a standard fiber-optic SFP module you can plug in directly to the Gigabit Ethernet switch optical interface. You can use Transmitter and receiver without the switch connecting them together over duplex LC fiber optic jumper

• F-DVI-TX-RX-DATA SHEET

IP to CATV Edge Modulators

CABLE TV Headend in a Box. QAM modulator for IP Edge QAM / ATSC /DVB-T /ISDB-T applications. This 1RU chassis has 2 GE inputs with SFP interface allowing up to 1024 channels TS streams of UDP/RTP, unicast and multicast streams. Maximum input of each GE input is 840 Mbps that will be output through the RF output on 16 non-adjacent QAM carriers in the range of 50-960Mhz.

• H-IPRF-16/32-QAM - DATASHEET

L-Band Satellite RF 45-3000Mhz

L-Band RF satellite signal extender over fiber optic cable transport system. multiple L-band fiber optic transport up to 80 Km. Can also provide LNB power at various voltages.

• FlLBAND-TX/RX DataSheet
• SpecSheet

4 GPS RF carrier signals over 4 fiber Outdoor waterproof enclosure optical Transmitter and 19" rack-mountable Receiver with redundant power supply

• DataSheet

6 Channel Satellite LNB fiber optic Extender. 6 LNB Satellite TV antenna feed over fiber optic transmission system with internal CWDM optics. Ideal for point to point transport, or for small (Level 1 only) scale LTTH distribution systems with 32 or less optical receivers. Supports ATSC feed from local off-air antenna 54-3000mHz. Best satellite distribution system for MDU - Multi-Dwelling Unit

• DataSheet
• SpecSheet
• datasheet-f-lb61-cwdm-txrx-2025.pdf

4 CH LNB satellite dish fiber optic transport over single mode fiber optic cable 4 Laser Satellite TV antenna feed over fiber optic transmitter system with internal CWDM optics. Ideal for point to point transport or Point up to 32 multipoint. Most advanced multi-channel satellite distribution system for MDU. Maximum durability with advanced automatic system adjustments to deliver 100% clear HDTV programming with zero signal loss.

• DataSheet
• SpecSheet

4x Ch L-Band DWDM Transmitter for Satellite TV. Designed for delivery of satellite service to more than 5000 locations, or to be used as a satellite to home LTTH system. Used similarly as many CATV FTTH systems, instead LTTH units transport 4 independent satellite signals off the Dish and mux them into a single fiber. DWDM light spectrum could be amplified by EDFA, this is why we can distribute the

• DataSheet
• SpecSheet

Past Generation Equipment

Ku-Band RF over fiber optic cable transport system. Can be customized for transport distances of up to 150 Km. Can also provide LNB power at various voltages.

• DataSheet

Dual channel single depth encoder cards for Thor modulator chassis systems. Provides up to 4 channels HD encoding from Component YPbPr inputs.

• DataSheet

Thor CMOD series compact HDTV digital channel modulator with licensed Dolby AC/3 encoding chip. Supports full HD encoding in MPEG-2 or H.264 formats on HDMI & component inputs. USB DVR and looping file based playout supported. Different firmware available for different RF standards for DVB-C, QAM, ATSC, DVB-T HDMI HDCP Licensed so you can connect any of your devices via installed HDMI cable

• H-AC3-CMOD-QAM Datasheet

2 Ch HD-SDI HD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

S-Band RF over fiber optic cable transport system. Can be customized for transport distances of up to 150 Km. Can also provide LNB power at various voltages.

• DataSheet

1, 2, or 4 HD-SDI video inputs to QAM or DVB-C digital TV channel outputs with low latency 70 ms encoding

• DataSheet

1 Ch HD-SDI HD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

SD Video Decoder with DVB-ASI or IP inputs and SD-SDI, S-Video, or Component Video Outputs.

• DataSheet

4 Channels Gigabit Ethernet over fiber. The optics can be customized for transport distances of up to 150 Km.

• DataSheet

Compact HD H.264 encoder with integrated advanced network video server. Provides robust transport protocols for open internet HD video transport across the public internet without a VPN. Also provides remote login with web video preview. Ideal for difficult network transport projects with poor network conditions. RTP /RTSP/HTTP /Unicast , Multicast

• DataSheet

K-Band RF over fiber optic cable transport system. Can be customized for transport distances of up to 150 Km. Can also provide LNB power at various voltages.

• DataSheet

This unit is for transporting GPS RF carrier signals over fiber for transport indoors or to non line of sight locations. Perfect for hangars, ships, or buildings. Provides a transparent and secure RF connection between your GPS antenna and receiver for distances from 100 ft to 20Km The GPS signal the frequency standard can generate very precise timing or sinewave outputs that are used in a variety of applications.

• DataSheet
• SpecSheet

2 Ch CVBS SD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

Broadcast SD Video Hardware Encoder with SD-SDI or Baseband video /Audio input and both DVB-ASI and IP outputs.

• DataSheet

3 Ch CVBS SD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

4 Ch CVBS SD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output

• DataSheet

2 Channels Gigabit Ethernet over fiber. The optics can be customized for transport distances of up to 150 Km.

• DataSheet

10 Gigabit Ethernet Media Converter for SFP to XFP

• DataSheet

1 Ch HDMI HD Encoder + CATV QAM or ATSC (8VSB) Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

4 Ch HDMI HD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

2 Ch HDMI HD Encoder Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real time encoding applications for broadcast and digital video distribution.

• DataSheet

Pro-DVB Encoders

H-HDPerformux-XX is an affordable high density H.264 and H.265 - High Efficiency Video Coding (HEVC) Multi-channel IP encoder. The HDMI HDCP enabled IPTV Streaming HD encoder & integrated multiplexer is a 1RU platform. Outputs up to 24 SMPTS' UDP or RTP(RTSP), 1MPTS, encodes HD video from any HDMI source into IPTV streams. The encoding video rate is adjustable from 1-20Mbps with ASI input and Output (copy of MPTS)

• H-HDPerformux 4-8-16-24 DATA SHEET

Thor model number H-8A-ENC is an eight channel audio encoder for converting unbalanced analog audio to digital transport streams. The system employs the MPEG-1 Layer 2 audio codec and provides outputs on ASI feeds as well as IP network feeds in the form of UDP MPTS.

• H-8A-ENC - SPEC SHEET
• H-8A-ENC - DATASHEET

Thor MPEG-2/H.264 HD Encoder is the new broadcasting audio & video encoding and multiplexing device with powerful functionality. It has multiple video input interfaces (SDI, CVBS, YPbPr and HDMI) and 4 audio input interfaces (AES, RCA and XLR). It supports 4 stereo (8 mono) audios embedded to mix with the video to form a stream output. The encoded program outputs as a TS (transport stream) through ASI/IP port simultaneously.

• H-MPEG2-H264-E2 - SPEC SHEET
• H-MPEG2-H264-E2 - DATASHEET

SDI

4CH Bi-directional HD SDI + External Audio and RS232/422/485 control data over single fiber

• Product data sheet

8 Ch HD-SDI Fiber Kit with Dual Aux for Analog Audio or RS422/485/232 data or Contact closure

• Datasheet

4 Ch Mini HD-SDI Fiber Optic Kit with Aux F-M4SDI transmitter and receiver set transports four full HD-SDI, SD-SDI, or DVB-ASI digital video over fiber. Provides return path RS-485 in addition to Aux port that optionally supports audio, RS-232/422, or contact closure.

• Datasheet

F-M2SDI transmitter and receiver set transports two full channels of HD-SDI or SD-SDI over fiber cable. Provides return path RS-485 as well as an auxiliary port that can support audio, RS-232/422, or contact closure.

• Data Sheet: F-M2SDI-TX/RX

Inexpensive HDMI over fiber transmitter and receiver set. It transports uncompressed HDMI Video/ Audio signal up to 20Km over single mode fiber or up to 3000 feet over multimode fiber.

• DataSheet

(SD/HD-SDI coax-to-fiber) throw-down converter. Transmit multi-rate SD/HD-SDI video, up to 1.485Gb/s, at extended distances up to 80Km over one strand of single mode optical fiber, better than a rattler. F-M1SDI transmitter and receiver kit for transporting HD-SDI, SD-SDI, or DVB-ASI digital broadcast video signals over fiber cable. Provides 1 channel of RS-485 control data over a return path from the Rx back to the Tx.

• Data Sheet: F-M1SDI

The F-12G-SDI-TX/RX is a high performance 1-channel 12G / 6G / 3G / HD /SD-SDI optical transceiver, with zero loss and high-quality 4K (3840x2160@60) video transmission over one single mode optical fiber.

• F-12G-SDI-TX/RX Data Sheet
• f-12g-sdi-txrx-data-sheet-12g-3g-hd-sd-sdi-to-fiber-8230

SDI converters, SDI modulators

This Unit Provides 8 SDI or HDMI video sources. It converts 8 SDI/HDMI sources to individual CATV RF DVB-C QAM or Off-Air ATSC channels. Our unit supports European DVB-T and Latin America ISDB-T modulation standards. Support Low Latency and full HDTV up to 1080p Video

• H-HYBRID-RF-8 Datasheet

Converts one to four HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in 8VSB ATSC format for US Over the Air OTA.

• Datasheet

Converts one or more HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP (UDP,RTP,RTSP), & RF in QAM-256 J.83A/B/C for US Cable format or DVB-C.

• H-1/4SDI-QAM-IP - Datasheet

SDI SD/HD/3G with CWDM

1 Channel HD-SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• DataSheet

4 Channels HD-SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• DataSheet

2 Channels SD HD 3G SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• DataSheet

Transcoders, MPEG Converters, IP ASI Gateways

ASI to IP / IP to ASI or Bi Directional DVB ASI over IP Gateway for MPEG2 MPEG4 Transport Streams over Ethernet Networks.

• DataSheet