User's Quick Guides - Thor Broadcast

Analog Audio Video

2, 4, 8, 16 or 32 XLR kits allow for balanced audio to be sent over long distances using single mode or multimode fiber without losing quality.

• F-2A-B-XLR-TXRX - QUICK SETUP GUIDE
• F-4A-B-XLR-TXRX - QUICK SETUP GUIDE

RCA Audio over Fiber Transmission System sends 2-32 channels of RCA line level audios over one multi-mode or one single-mode optical fiber. Plug and Play units, easily deployed, and exceptional reliability.

• F-16A-RCA-TxRx - QUICK SETUP GUIDE

2, 4, 8, 16, or 32 Unbalanced Analog Audio fiber optic transmitter and receiver kits allow you to transport and extend analog audio over single mode or multi-mode fiber. Perfect for intercom over fiber extension.

• F-2A-TxRx - QUICK SETUP GUIDE
• F-4A-TxRx - QUICK SETUP GUIDE
• F-8A-TxRx - QUICK SETUP GUIDE
• F-16A-TxRx - QUICK SETUP GUIDE
• F-32A-TXRX - QUICK SETUP GUIDE

Analog Baseband Video Audio, RS485/422/232 Data, Contact Closure

1 HD-TVI - AHD-H, AHD-M, AHD-L / HD-TVI 720P & 1080P / HD-CVI 720P & 1080P 1 HD-TVI Video over Fiber Converters can transmit 1 channel HD-TV, HD-CVI, ADA HD video over fiber from the camera to the recorder or display.

• F-1HD-1D-TVI-TX/RX - QUICK SETUP GUIDE

Thor Fiber 8 HD-TVI Video over Fiber Converters can simultaneously transmit 8 channels of AHD/TVI/CVI video over one fiber. Eight individual HD-TVI - AHD-H, AHD-M, AHD-L / HD-TVI 720P & 1080P / HD-CVI 720P & 1080P

• F-8HD-1D-TVI-TXRX - QUICK SETUP GUIDE

8 Channel Baseband Composite video over fiber for the security industry

• F-8V-TxRx / F-8V-1D-TxRx - QUICK SETUP GUIDE

4 HD-TVI Video over Fiber Converters can simultaneously transmit 4 channels AHD/TVI/CVI video over one fiber - Transmitter Receiver kit. Fourx HD-TVI - AHD-H, AHD-M, AHD-L / HD-TVI 720P & 1080P / HD-CVI 720P & 1080P

• F-4HD-TVI-TxRx - QUICK SETUP GUIDE

Broadcast PTZ Streaming Cameras SDI HDMI USB

Thor Broadcast advanced video POE PTZ camera with hyper video image processing technology and HD CMOS Sensor with multiple video output formats. Max resolution up to 1080P60FPS; Approx 2.38 Megapixel picture presentation, true-color image quality. This camera has a 4.9 - 94mm lens providing a 20x zoom range, allowing for effective close-focus and wide-angle shots to best suit both face-to-face and group meetings, church live streaming, and conferences. It does well in low-light conditions owing to a fast f/1.6 - f/3.5 lens aperture and minimum illumination requirement of only 0.5 lux at f/1.8, Shutter Speed 1 to 1/10000s

• Using IP RTSP Camera stream with the capture or editing software as OBS short guide

The Thor Broadcast-quality MaximusProFly video PTZ camera has advanced video image processing technology and a Full HD CMOS Sensor with multiple video output formats. Max resolution up to 1080P60FPS; Approx 2.38 Megapixel picture presentation, true-color image quality. Frame Rate 1080P60/59.94/50/30/29.97/25;1080I60/59.94/50/30/29.97/25;720P60/50/30/25, 480I60, 576I50 Easy direct RTMP RTSP streaming to services like Youtube, Facebook, Twitch or Wowza; for church live streaming setup, or similar. The camera can be controlled by web interface or remote control that's included.

• Using IP RTSP Camera stream with the capture or editing software as OBS short guide

The MaximusH265Pro is an 20x BOX HD-SDI / HDMI and integrated IP streaming POE camera that includes advanced image processing algorithms and high-quality HD CMOS sensors, a motion estimation algorithm based on 2D / 3D digital noise reduction, low-Illumination with clear image, multi-interface video output, that is easy to set up and use. Widely used in government agencies, Fortune 500 enterprises, small and medium-sized conference rooms, churches, house of worship, courts, public security systems, police and enforcement, education, CCTV, intelligent transportation, and medical facilities.

• Maximus H265 Pro Short Installation Guide for THOR SDI HDMI IP 20 X PTZ Box Camera

Cable TV CATV RF 45-900Mhz

32 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. 1550nm Optics for C-Band comparability with EDFA Optical Amplifier systems.

• F-RF-1310-TX - QUICK SETUP GUIDE

8 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX - QUICK SETUP GUIDE

4 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX - QUICK SETUP GUIDE

16 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.

• F-RF-1310-TX - QUICK SETUP GUIDE

Data & Ethernet

Serial Asynchronous Data Fiber Converters. This unit converts RS-232 or RS-422 or RS-485 to fiber optic cable. By transmitting data over optical fiber, these serial media converters provide an economical path to extend the reach of serial devices

• F-RSD-A/B-TXRX - QUICK SETUP GUIDE

Bi-directional 10/100/1000 Fast and Gigabit Ethernet Transport over one fiber; the Converter has 1 single fiber optic connector for transmitting at 1310nm and receiving at 1550nm, and 10/100/1000Base-TX to 1000Base-FX Fast and Gigabit Ethernet copper RJ45 fo fiber Converter SC/UPC,The Link contain both units A and B side + power supplies

• F-GET-TRS-AB - QUICK SETUP GUIDE

Compact 10/100 Ethernet to fiber media converter. Copper RJ45 Ethernet to duplex SC fiber connector, fully compliant with IEEE 802.3 and 802.3u Fast Ethernet standards, 10/100Mbps Auto Negotiation, Auto cross over for TP port. Single Mode and Multi Mode models available

• F-FE-TR-SM - QUICK SETUP GUIDE

Extend independent 8 phones over 1 fiber optic cable. 8 Channel telephone over fiber transceiver for secure telephone lines. These units transport the standard analog phone signal point to point over fiber optic cable and are impossible to tap.

• F-8TEL-TxRx - QUICK SETUP GUIDE

10/100/1000Base-T to 1000Base-X or 100Base-X Flexible Fiber SFP Media Converters. The optics can be customized for transport distances of up to 150 Km -Model Dependent

• F-GET-TR-SFP - QUICK SETUP GUIDE

4 Port USB Fiber Optic Extender - This kit includes a transmitter and a receiver, can extend USB signals bidirectionally over just one fiber. USB 1.1 &, 2.0 up to 10km over single mode fiber -1.25Gbps (SFP Included)

• F-4USB-TxRx - QUICK SETUP GUIDE

1 -2 Channel telephone over fiber transceiver for secure telephone lines. These units transport the phone signal over fiber optic cable and are impossible to tap.

• F-2TEL-TxRX - QUICK SETUP GUIDE

4 Channel telephone over fiber transceiver for secure telephone lines. These units transport the phone signal over fiber optic cable and are impossible to tap.

• F-4TEL-TxRX - QUICK SETUP GUIDE

HDMI

Converts 1-4 HDMI digital video inputs to Coax - CATV US Cable format or DVB-C Encoding: HDMPEG-2 or HD H.264 streams. Outputs : RF in QAM-256 J.83A/B/C & ASI & IP UDP,RTP/RTSP, HD 720p/1080i/1080p

• Quick Configuration Guide H-1HDMI-QAM-IP-LL
• H-2HDMI-QAM-IPLL - QUICK SETUP GUIDE

This is a smaller version of the popular H-HDMI-CC-RF unit which has HDMI Input up to full HD 1080p/60, supports QAM/ ATSC/ DVB-T/ ISDB-T modulation standards. All the Video / Audio encoding parameters and modulation channels are controlled via 10/100 Standard Ethernet and Web interface. This unit can be mounted vertically or horizontally on a rack mount cage panel for up to 12 units side by side.

• H-HDMI-RF-PETIT - QUICK SETUP GUIDE

H-HDMI-RF-Petit-IR Compact Universal Digital QAM, ATSC RF Encoder, and RF Modulator w/ IR return path and HDMI Loop-out to control HDMI Video source remotely over the coax ( Aplication Example: The Modulator and Cable TV Box HDMI source can be located in one place, and the a user can send commands from the STVB remote control and change the channel on the STB, from any other location where the TV is located over the coaxial network, so the modulator sends RF channels to all TV's location and IR can send form the TV to the STB over the same coax wiring "

• H-HDMI-RF-Petit-IR - QUICK SETUP GUIDE

4K Encoder Modulator. It integrates H.265/HEVC and H.264/AVC 10-bit precision encoding technology, multiplexing and modulating functions in a standard 1U case. It supports UHD Ultra-High-Definition Television UHDTV resolution up to 3840 X 2160@60P. Chroma 4.2.2 and 4.2.0 HEVC offers incredible compression efficiency, making live UHD delivery available for satellite, cable, terrestrial and fiber networks.

• H-4K-UHD-QAM-IP - QUICK SETUP GUIDE

Converts one to four HDMI digital video inputs to RF ATSC off Air channels. Outputs ASI, IP, & RF in 8VSB ATSC format for US Over the Air OTA. Encodes as a MPEG-2 or H.264 video and MPEG1 or Dolby AC3 Audio, HD 720p/1080i/1080p

• H-1HDMI-ATSC-IPLL - QUICK SETUP GUIDE

Your choice of selecting 8 HDMI or SDI video sources. It converts 8 HDMI/SDI sources to individual CATV RF DVB-C QAM or Off-Air ATSC channels. It also supports European DVB-T and Latin America ISDB-T modulation standards. Support Low Latency and full HDTV up to 1080p Video

• H-HYBRID-RF-8 - QUICK SETUP GUIDE

Thor's 1, 2, 4, 6, and 8x HDMI Digital RF Modulator CC is your all-in-one solution. It seamlessly encodes and modulates audio/video signals into ATSC/DVB-C/QAM/DVB-T/ISDB-T RF output. Enjoy Low Latency Mode for live events, HDCP compliance, and compatibility with any HDMI source, including DVD Players or Cable Satellite STBs, up to 1080p/60 resolution. Elevate your experience with Thor

• Quick Configuration Guide H-HDCOAX

The H-16HDMI-RF-AMOD is a 1RU rackmount HDMI input, agile modulator, that will convert all of your 16 HDMI SD HD inputs into NSTC/PAL/ SECAM analog RF Channels

• H-16HDMI-RF-AMOD - QUICK SETUP GUIDE

QAM, ATSC, DVB -T, ISDB -T Modulation, Thor 1, 4, or 8 x HDMI Digital RF Modulator is an all-in-one device integrating MPEG2 encoding and modulation to convert audio/video signals into ATSC / DVB-C QAM DVB-T / ISDB-T RF output. Supports Low Latency Mode for live event applications, HDCP compliant, works with any HDMI source like DVD Player or Cable Satellite STB up to 1080p/60 resolution The 8-channel model in addition to 8HDMI inputs has also 8 CVBS baseband video inputs, which can be selected, those inputs could be also used for Closed Captioning Inputs.

• H-THUNDER-4 - QUICK SETUP GUIDE
• H-THUNDER-8 - QUICK SETUP GUIDE

4 RF Input to RF output - Latest generation Trans- Modulators for satellite, terrestrial, and cable TV applications. DVB-S/S2 to QAM, DVB-S/S2 to ATSC ATSC to QAM and more

• H-4ATSC-QAM-IPLL - QUICK SETUP GUIDE
• H-4ATSC-QAM-IPLL - QUICK INSTALLATION GUIDE

The Thor Broadcast H-2ADHD compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. Easy to use NMS GUI interface lets you adjust and manipulate any settings via any web browser for full autonomous control of the encoder. Supports full HD 1080p60 encoding from any source that uses HDMI. The H-2ADHD carries both modulation standards for both QAM and ATSC that are easy to switch between with a simple dropdown menu option inside the GUI. Supports QAM, ATSC ,DVB-T, ISDB-T modulations - it is selectable

• H-2ADHD-QAM-IPLL - QUICK SETUP GUIDE

IP Network Encoders

Real-time Network Encoder with 4 and 8 HDMI HDCP Compliant Inputs for IPTV Streaming. The unit has built-in IPTV server and supports multiple IP streaming protocols like UDP, RTSP, HLS, HTTP, RTMP, for direct steaming over LAN and WAN Supports full HD 480i / 720p / 1080i / 1080p and H.264 Video Encoding

• H-4HDMI-IPCast - QUICK SETUP GUIDE
• H-8HDMI-IPCAST - QUICK SETUP GUIDE

The SPARTAN-1 is an IP streaming device that comes equipped with a single input port capable of supporting HDMI, CVBS, and SDI inputs. It is specifically designed to facilitate MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding, ensuring high-quality video and audio output. Additionally, this device supports a range of popular streaming protocols such as UDP/RTP (Unicast/Multicast), HLS, RTMP, and HTTP in Low Latency, making it an ideal solution for streaming over local area networks (LAN) or over the internet.

• H-SPARTAN-1 - QUICK SETUP GUIDE

The Spartan-2 has dual inputs for HDMI and SDI (selectable) and encodes in Mpeg4 AVC/H.264 video and Mpeg1 L2, AAC and AC3 audio encoding.

• H-SPARTAN-2 - QUICK SETUP GUIDE

The Thor Broadcast H-H264IP-E RTSP network encoder is a real time encoding device for IP broadcasting over LAN or Public Internet. The signal source could be from a STB, PC, TV etc via HDMI and it will transport the live program through the Internet/LAN output this LAN broadcast can be received by any phone, tablet, or PC. This Thor network encoder lets you access your IP STB, PC or TV anywhere to watch your stream of content. The device supports HDMI/YPbPr/S-Video/AV/USB input and encodes in MPEG 4 AVC/H.264 format. This H.264 IP signal will output over UDP, RTP/RTSP, HTTP, and HLS.

• H-H264IP-E-NETWORK-ENCODER - QUICK SETUP GUIDE

IP to CATV Edge Modulators

Digital modulator with ASI Input and CATV RF output - QAM or ATSC or DVB-T or ISDBT (model dependent) Also IP output in UDP/RTP/RTSP - SPTS/MPTS, Unicast/Multicast

• H-ASI-QAM - QUICK SETUP GUIDE

CABLE TV Headend in a Box. QAM modulator for IP Edge QAM / ATSC /DVB-T /ISDB-T applications. This 1RU chassis has 2 GE inputs with SFP interface allowing up to 1024 channels TS streams of UDP/RTP, unicast and multicast streams. Maximum input of each GE input is 840 Mbps that will be output through the RF output on 16 non-adjacent QAM carriers in the range of 50-960Mhz.

• H-IPRF-32-QAM - QUICK SETUP GUIDE

L-Band Satellite RF 45-3000Mhz

Single GPS fiber extender up to 20Km over single mode fiber w/ SC/APC connectors

• F-1GPS-TxRx - QUICK SETUP GUIDE

4 CH LNB satellite dish fiber optic transport over single mode fiber optic cable 4 Laser Satellite TV antenna feed over fiber optic transmitter system with internal CWDM optics. Ideal for point to point transport or Point up to 32 multipoint. Most advanced multi-channel satellite distribution system for MDU. Maximum durability with advanced automatic system adjustments to deliver 100% clear HDTV programming with zero signal loss.

• F-LB41-CWDM-TXRX - QUICK SETUP GUIDE

6 Channel Satellite LNB fiber optic Extender. 6 LNB Satellite TV antenna feed over fiber optic transmission system with internal CWDM optics. Ideal for point to point transport, or for small (Level 1 only) scale LTTH distribution systems with 32 or less optical receivers. Supports ATSC feed from local off-air antenna 54-3000mHz. Best satellite distribution system for MDU - Multi-Dwelling Unit

• F-LB61-CWDM-TxRx - QUICK SETUP GUIDE

Thor Fiber MDU Satellite over Fiber - Optical Transmitter F-SattGalaxy-TX-5 has 5 independent RF inputs, converts each satellite signal from a quad or quatro LNB, and also terrestrial off-air TV signal via antenna array in a single unit to transmit over one singlemode fiber. Thor Optical MDU Satellite Receiver F-SattGalaxy-RX converts the optical signal back to the original 4 satellite signals and the fifth terrestrial off-air TV signal injected on the TX. Off Air TV / Radio signals like ATSC, Analog NTSC, DVB-T, or ISDB-T, DVB-C QAM annex A/B or RF FM Radio can be used in the 5th RF port for transmission.

• F-SattGalaxy-TXRX-5 - QUICK SETUP GUIDE

Pro-DVB Encoders

Thor IPTV Gateway is a device that is used for protocol conversion scenarios and streaming media distribution scenarios. Matrix converter between UDP, HLS, RTMP, HTTP, RTSP, and RTP.

• H-IPTV-GATEWAY - QUICK CONFIGURATION GUIDE

The SPARTAN-1 is an IP streaming device that comes equipped with a single input port capable of supporting HDMI, CVBS, and SDI inputs. It is specifically designed to facilitate MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding, ensuring high-quality video and audio output. Additionally, this device supports a range of popular streaming protocols such as UDP/RTP (Unicast/Multicast), HLS, RTMP, and HTTP in Low Latency, making it an ideal solution for streaming over local area networks (LAN) or over the internet.

• H-SPARTAN-1 - QUICK SETUP GUIDE

The SPARTAN-4 has 4 input ports for HDMI / CVBS for MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding. It also allows playing TS files through a USB port on the front of the unit. Supports up to 1080/60P full HD resolution, UDP/RTP (Unicast/Multicast), HLS, RTMP, HTTP in Low Latency

• H-SPARTAN-4 - QUICK SETUP GUIDE

H-HDPerformux-XX is an affordable high density H.264 Multi-channel IP encoder. The HDMI HDCP enabled IPTV Streaming HD encoder & integrated multiplexer is a 1RU platform. Outputs up to 24 SMPTS' UDP or RTP(RTSP), 1MPTS, encodes HD video from any HDMI source into IPTV streams. The encoding video rate is adjustable from 1-20Mbps

• H-HDPerformux QUICK SETUP GUIDE
• H-HDPerformux-8 - QUICK SETUP GUIDE
• H-HDPerformux-24 - QUICK SETUP GUIDE
• H-HDPerformux-16 - QUICK SETUP GUIDE

Low Latency, HDCP compliant Thor H-4HD-EMH-AC3 is a 4 Ch HDMI/Component/Composite MPEG2/H.264 encoder that generates multiplexed ASI & IPTV output formatted specifically for US TV standards. Supports MPEG2 / MPEG4, closed captioning and Dolby AC3 Audio encoding up to 1080p@60 resolution, or lower resolutions if utilizing the component or composite inputs.

• H-4HD-EMH - QUICK SETUP GUIDE

1 Ch HD-SDI or HDMI MPEG2/H.264 encoder that generates a multiplexed ASI & IPTV output formatted specifically for US Television standards. Supports closed captioning 708(SDI only) and Dolby Digital AC3 Audio Encoding for maximum efficiency and production.

• H-1HD-EMH / H-2HD-EMH - QUICK SETUP GUIDE

Low Latency, High-density HD encoding and multiplexing system for headend program generation. Accepts 8 HD-SDI inputs at up to 1080p60, and offers 9 IP outputs (8x SPTS, 1x MPTS) and dual ASI outputs containing all encoded programs. Also included is an ASI input for multiplexing an SPTS program with the outputs.

• H-8HD-EMS - QUICK SETUP GUIDE

Low Latency Thor H-4HD-EMS is a 4 Ch HD-SDI MPEG2/H.264 encoder that generates a multiplexed ASI & IPTV output formatted specifically for US tv standards. Support MPEG2 / MPEG4,closed captioning and Dolby AC3 Audio encoding up to 1080p@60 resolution

• H-4HD-EMS - QUICK SETUP GUIDE

Thor MPEG-2/H.264 HD Encoder is the new broadcasting audio & video encoding and multiplexing device with powerful functionality. It has multiple video input interfaces (SDI, CVBS, YPbPr and HDMI) and 4 audio input interfaces (AES, RCA and XLR). It supports 4 stereo (8 mono) audios embedded to mix with the video to form a stream output. The encoded program outputs as a TS (transport stream) through ASI/IP port simultaneously.

• H-MPEG2-H264-E2 - QUICK SETUP GUIDE

RF CATV and IPTV OTT STB's

High Definition IP Set Top Box for decoding IP streams from an encoder. This unit can be easily mounted behind a display to bring HDMI connectivity to remote locations for displaying network content.

• H-STB-IP - QUICK SETUP GUIDE

RF Decoders IRD's

This is a Family of products equipped with 16 RF Tuners, tuners could decode the following: QAM Annex A&B, DVB-T, DVB-T2, ISDB-T; model dependent units ATSC, DVBS/S2 The unit works as an RF to IP Gateway and can output IP SPTS Multicast or Unicast CONVERT 16 CATV RF to IP

• h-16qam-ip-quick-configuration-guide.pdf
• H-16ATSC-IP - QUICK SETUP GUIDE
• H-16QAM-IP - QUICK SETUP GUIDE

High end state of the art decoder with RF tuner, advanced IP streaming, front LCD confidence monitor, and supports 608 and 708 closed captioning. RF tuners for DVB-S2, ATSC, and QAM are available. All settings and alarm information are available through web browser based network management console.

• quick-configuration-guide-h-ird-v3-atsc-2023.pdf
• H-IRD-V3-ATSC - QUICK SETUP GUIDE
• H-IRD-V3-ATSC-2 - QUICK SETUP GUIDE
• H-IRD-V3-QAM - QUICK SETUP GUIDE
• H-IRD-V3S2 - QUICK SETUP GUIDE
• H-IRD-V3S - QUICK SETUP GUIDE

SDI

F-M2SDI transmitter and receiver set transports two full channels of HD-SDI or SD-SDI over fiber cable. Provides return path RS-485 as well as an auxiliary port that can support audio, RS-232/422, or contact closure.

• F-M2SDI-F-M4SDI - QUICK SETUP GUIDE

4 Ch Mini HD-SDI Fiber Optic Kit with Aux F-M4SDI transmitter and receiver set transports four full HD-SDI, SD-SDI, or DVB-ASI digital video over fiber. Provides return path RS-485 in addition to Aux port that optionally supports audio, RS-232/422, or contact closure.

• Product Guide
• F-M4SDI-TxRx - QUICK SETUP GUIDE

The F-M1SDI-TR-ET is a high performance, reliable, 1-channel bidirectional HD-SDI video optical transceiver + 10/100 Ethernet transceiver over the single fiber which performs in real-time, loss-free, and high-quality SDI video and Ethernet transmission over an optical single-mode fiber.

• F-M1SDI-TR-ET - QUICK SETUP GUIDE

The F-12G-SDI-TX/RX is a high performance 1-channel 12G / 6G / 3G / HD /SD-SDI optical transceiver, with zero loss and high-quality 4K (3840x2160@60) video transmission over one single mode optical fiber.

• F-12G-SDI-TXRX - QUICK SETUP GUIDE

4CH Bi-directional HD SDI + External Audio and RS232/422/485 control data over single fiber

• Product guide
• F-4SDI-B-TxRx - QUICK SETUP GUIDE

These multi-functional bi-directional fiber optic transceivers Cobra II support SD, HD, 3G, 12G-SDI video with LOOP OUT, 3.5mm stereo analog audio, RS232/485/422 data, and A tally light, also known as a tally indicator or tally lamp signals over only one single mode fiber, thanks to optical CWDM multiplexing. All of this is achieved with zero delay and no compression, providing uncompressed high-quality signals over fiber for distances of up to 10km.

• COBRA II - QUICK SETUP GUIDE

Inexpensive HDMI over fiber transmitter and receiver set. It transports uncompressed HDMI Video/ Audio signal up to 20Km over single mode fiber or up to 3000 feet over multimode fiber.

• F-HDMI-SMSC - QUICK SETUP GUIDE

SDI converters, SDI modulators

Converts one to four HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in 8VSB ATSC format for US Over the Air OTA.

• H-4SDI-ATSC-IPLL - QUICK SETUP GUIDE
• Encoder/Modulator IPTV Setup

Converts one or more HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP (UDP,RTP,RTSP), & RF in QAM-256 J.83A/B/C for US Cable format or DVB-C.

• Encoder/Modulator VCT Virtual Channel Setup Guide
• Encoder/Modulator IPTV Setup Guide
• H-4SDI-QAM-IPLL - QUICK SETUP GUIDE
• H-1/2/4 SDI-QAM-IPLL - QUICK CONFIGURATIOIN GUIDE

SDI SD/HD/3G with CWDM

8 Channels 3G-SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 120km.(model dependent) We can also incorporate CWDM or DWDM optics for high density systems. Other available configurations: 7x 3G SDI in one direction and 1x 3G SDI in the reverse direction , 6x 3G SDI in one direction and 2x 3G SDI in the reverse direction, 5x 3G SDI in one direction and 3x 3G SDI in the reverse direction over single fiber.

• F-8SDI-3G-TxRx-RM - QUICK SETUP GUIDE

2 Bidirectional Channels HD-SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.

• F-2SDI-B-3G-TxRx - QUICK SETUP GUIDE

This state-of-the-art professional broadcast equipment facilitates the transmission of 16 channels of SD/HD/3G 4K/UHD video and audio signals over one fiber optic cable without any loss in quality for distances of 20, 40, 80, or 120Km Additionally, it includes an SDI Loop out feature, allowing for the duplication or monitoring of the transmitted signal. This versatility makes it a valuable tool for video distribution and broadcasting applications where multiple channels and different video standards need to be efficiently managed and transmitted over long distances fiber optic lines or cables .

• F-16SDI-3G-TxRx - QUICK SETUP GUIDE

This model, F-8SDI-3G-LOOP-TX/RX, is an 8-channel SD HD 3G fiber optic transmitter and receiver with SDI signal loop-out. The receiver also has primary outputs and mirrored secondary outputs, allowing connection to two different monitors. It is a very convenient way for SDI signal monitoring or retransmission to other locations.

• F-8SDI-3G-LOOP-TXRX - QUICK SETUP GUIDE

The F-12G CWDM Tx and Rx sets are high performance 1/2/4/8 input 12G / 6G / 3G / HD / SD-SDI optical transmission, with zero loss and high-quality 4K (3840x2160@60) video transmission over one single mode fiber up to 10Km

• F-12G-8SDI-CWDM-TX/RX - QUICK SETUP GUIDE

This state-of-the-art professional broadcast equipment facilitates the transmission of 8 bidirectional channels of SD/HD/3G 4K/UHD video and audio signals over one fiber optic cable without any loss in quality for distances of 20, 40, 80, or 120Km. Additionally, it includes an SDI Loop out feature, allowing for the duplication or monitoring of the transmitted signal. This versatility makes it a valuable tool for video distribution and broadcasting applications where multiple channels and different video standards need to be efficiently managed and transmitted over long distances fiber optic lines or cables. Sold as a set, transmitter and receiver included in 1 RU standard rack mount chassis.

• F-8SDI-B-3G-TXRX - QUICK SETUP GUIDE