User's Manuals - Thor Broadcast

Analog Audio Video

2, 4, 8, 16, or 32 unbalanced analog audio fiber optic transmitter and receiver kits allow you to transport and extend analog audio over single-mode fiber. Perfect for intercom-over-fiber extension.

• F-2-4-8-16-32AUDIO USER MANUAL

Broadcast PTZ Streaming Cameras SDI HDMI USB

The compact Maximus4kFly is easy to set up, comes with a built-in microphone, offers resolution up to 4K, and has an easy-to-use lens with built-in enhancements for quick setup. Used in countless video teleconferencing applications, from medicine to education, meetings, streaming, house of worship, and church streaming, this mini camera can do it all with ease, as it has USB 3.0 and HDMI outputs so you can quickly connect to multiple devices. Auto-detect for easy streaming using YouTube, Facebook, Zoom, and other video streaming or conference software or apps.

• maximus4kfly-manual.pdf

The Thor MaximusControl is the only necessary accessory for your Thor PTZ Camera. The control center is a professional-grade video PTZ controller with built-in VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control is able to independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, so you are able to adapt and control different cameras from different manufacturers, all with the same controller. It can PTZ control 7 different cameras and protocols at the same time.

• maximuscontrol-manual.pdf

The MaximusH265Pro is a 20x BOX HD-SDI / HDMI camera with integrated IP streaming and POE. It includes advanced image processing algorithms and high-quality HD CMOS sensors, a motion estimation algorithm based on 2D / 3D digital noise reduction, low illumination with a clear image, and multi-interface video output, and is easy to set up and use. Widely used in government agencies, Fortune 500 enterprises, small and medium-sized conference rooms, churches, houses of worship, courts, public security systems, police and enforcement, education, CCTV, intelligent transportation, and medical facilities.

• maximush265pro-manual.pdf

Thor Broadcast Maximus4kFly-B 4K HDMI and USB E PTZ Compact Camera USB3.0 and HDMI outputs, plug and play with wide lens and built in Microphone

Thor Broadcast advanced video POE PTZ camera with hyper video image processing technology and an HD CMOS sensor with multiple video output formats. Max resolution up to 1080P60FPS; approx. 2.38 Megapixel picture presentation, true-color image quality. This camera has a 4.9 - 94mm lens providing a 20x zoom range, allowing for effective close-focus and wide-angle shots to best suit both face-to-face and group meetings, church live streaming, and conferences. It does well in low-light conditions owing to a fast f/1.6 - f/3.5 lens aperture and a minimum illumination requirement of only 0.5 lux at f/1.8, shutter speed 1 to 1/10000s

• maximusprox-user-manual-.pdf

Cable TV CATV RF 45-900Mhz

Fiber to the home mini-node - CATV RF 45-1000Mhz Receiver with Return Path RF 5-45Mhz Optical Transmitter on a separate optical port.

• F-MININODE-2RP-HP-Manual

Low-cost RF Fiber Break system for high-security RF feeds. For short-distance transport over fiber and for RF security to prevent any RF leaks. Prevents coax from being used to transmit data in the return direction; using a Fiber Break Kit eliminates any possibility of your copper transmission returning on RF. Kit includes transmitter, fiber jumper, and mini-receiver.

• thor-fiber-f-rf-br-user-manual-quick-install-guide-.pdf

Internally modulated 2-8 mW Fiber Optic RF CATV analog or digital QAM ATSC transmitter for television carrier signals or any other RF in the 45-870 MHz band. 1550nm optics for C-Band compatibility with EDFA optical amplifier systems.

• f-rf-1550-tx-user-manual.pdf

Coax Cable over fiber - Uniquely designed bidirectional CATV over Fiber Set. It was designed to replace point-to-point coax cable since CATV requires bi-directional communication, this transceiver units provide service over coax cable that has 2 different components (CATV + Internet)

• f-rfof-txrx-user-manual.pdf

This is a CATV fiber optic receiver for transporting RF signals in the 40-870 MHz range. The unit can accept optical signals in all bands.

• User Manual

Compact CATV RF receiver for use with the Thor F-RF transmitter system. Fiber input - CATV RF 45-870Mhz output.

• User's Manual

Data & Ethernet

Serial Asynchronous Data Fiber Converters. This unit converts RS-232, RS-422, or RS-485 to fiber optic cable. By transmitting data over optical fiber, these serial media converters provide an economical path to extend the reach of serial devices.

• f-rsd-txrx-user-manual.pdf

DVB-S/S2 Satellite Modulators

Carrier-grade DVB-S & DVB-S2 satellite modulator with 3x redundant hot inputs for the highest reliability and failover protection. Provides latest-generation support for 16APSK and 32APSK modulation constellations.

• user-manual-h-4asi-dvbs2.pdf

HD-SDI Encoder + DVB-S/S2 Modulator. Encodes HD digital video inputs to MPEG-2 or H.264 transport streams, with output modulated to satellite carrier or IF.

• User's Manual

H-XX-DVBS2X is an integrated SDI / HDMI / YPbPr HD Encoder and DVB-S/S2/S2X Modulator. The encoding blade design makes it convenient to change the encoding module between video formats: HD SDI, HDMI, YPbPr, CVBS, and AES. It also has 1 channel ASI input for external TS pass-through or multiplexing. It outputs DVB-S/S2/S2X RF (IF optional - model specific) and ASI. It supports the currently required CID Carrier ID.

• h-xx-dvbs2x-user-manual.pdf

Fiber Amplifiers - EDFA

Thor Fiber Multi-Output EDFA Optical Amplifiers feature a single 1550nm input and are available with 2, 4, 8, 16, 32, or 64 outputs, each delivering between +14 and +23 dBm of optical power, depending on the model. Designed for large-scale CATV and FTTH applications, these integrated EDFA splitter units compensate for splitter and fiber losses, ensuring strong, stable signals over long distances. Select your model based on the required output power per port and the total number of outputs.

• f-edfa-16-user-manual-thor-fiber-16-port-optical-amplifier-8230
• f-edfa-4-user-manual-thor-fiber-4-port-optical-amplifier-8230

16 dBm EDFA Constant Output Optical Amplifier for 1550 nm

• f-edfa-user-manual.pdf

HDMI

12 HDMI Broadcast Encoder with CC (Closed Captioning), IPTV Streamer, and ASI Output

• h-12hdmi-qam-ipll-manual.pdf
• h-12hdmi-atsc-ipll-manual.pdf
• h-12hdmi-dvbt-ipll-manual.pdf
• h-12hdmi-isdbt-ipll-manual.pdf

4 HDMI, 4 Component YPbPr, & 4 Composite Video CVBS and CC to COAX or IP It generates 4 HDTV Cable TV/ATSC channels. Supports closed captions, Dolby AC/3, and ASI & IPTV output. Create your own and watch any HD content on any TV

• User manual

QAM, ATSC, DVB -T, ISDB -T Modulation, Thor 1, 4, or 8 x HDMI Digital RF Modulator is an all-in-one device integrating MPEG2 encoding and modulation to convert audio/video signals into ATSC / DVB-C QAM DVB-T / ISDB-T RF output. Supports Low Latency Mode for live event applications, HDCP compliant, works with any HDMI source like DVD Player or Cable Satellite STB up to 1080p/60 resolution The 8-channel model in addition to 8HDMI inputs has also 8 CVBS baseband video inputs, which can be selected, those inputs could be also used for Closed Captioning Inputs.

• h-thunder-4-user-manual.pdf
• thor-h-thunder-8-manual-2023.pdf

Models

• THOR H-Thunder-2 User Manual-12_2025 pdf.pdf

This is a smaller version of the popular H-HDMI-CC-RF unit which has HDMI Input up to full HD 1080p/60, supports QAM/ ATSC/ DVB-T/ ISDB-T modulation standards. All the Video / Audio encoding parameters and modulation channels are controlled via 10/100 Standard Ethernet and Web interface. This unit can be mounted vertically or horizontally on a rack mount cage panel for up to 12 units side by side.

• hdmi-modulator-h-hdmi-rf-petit-user-manual.pdf

Professional 16 Channel Analog Baseband CVBS Video Audio to CATV RF NTSC Analog Modulator - NTSC PAL SECAM in 19" rack The unit has 16 Analog CVBS Baseband Video Audio RCA Inputs, analog modulated agile channels can be selected individually across CATV RF spectrum from 45Mhz - 860Mhz

• H-16RCA-RF-AMOD USER MANUAL

4 RF input to RF output - latest-generation transmodulators for satellite, terrestrial, and cable TV applications. DVB-S/S2 to QAM, DVB-S/S2 to ATSC, ATSC to QAM, and more

• H-4ATSC-QAM-IPLL - USER MANUAL

Your choice of selecting 8 HDMI or SDI video sources. It converts 8 HDMI/SDI sources to individual CATV RF DVB-C QAM or Off-Air ATSC channels. It also supports European DVB-T and Latin America ISDB-T modulation standards. Support Low Latency and full HDTV up to 1080p Video

• h-hybrid-rf-8-manual.pdf

The Thor Broadcast H-2ADHD is a compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. The easy-to-use NMS GUI interface lets you adjust and manipulate settings via any web browser for full autonomous control of the encoder. It supports full HD 1080p60 encoding from any source that uses HDMI. The H-2ADHD supports both QAM and ATSC modulation standards, which are easy to switch between with a simple dropdown menu option inside the GUI. Supports QAM, ATSC, DVB-T, and ISDB-T modulations - all selectable.

• h-2adhd-qam-ipll-user-manual-.pdf

Convert 2x HDMI, 2x HD/SD/3G SDI with closed captioning to RF COAX or IP. It generates 4 HDTV QAM Cable TV/ATSC or DVB-T channels. Supports MPEG2/H.264 closed captions, Dolby AC/3, and comes equipped with ASI & IPTV UDP, RTP, RTSP output. Create your own channels and watch any HD content on any TV, HD 720p/1080i/1080p

• User Manual H-2SDI-2HDMI-QAM-IPLL

Converts one or more HDMI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in QPSK DVB-T for European television systems. HDTV channel distribution over existing antenna coax cable for easy, simple implementation, HD 720p/1080i/1080p

• User Manual

Converts one to four HDMI digital video inputs to RF ATSC off-air channels. Outputs ASI, IP, & RF in 8VSB ATSC format for U.S. over-the-air OTA. Encodes as MPEG-2 or H.264 video and MPEG1 or Dolby AC3 audio, HD 720p/1080i/1080p

• User Manual

Converts 1-4 HDMI digital video inputs to coax - CATV US cable format or DVB-C encoding: HD MPEG-2 or HD H.264 streams. Outputs: RF in QAM-256 J.83A/B/C, ASI, & IP UDP, RTP/RTSP, HD 720p/1080i/1080p

• H-4HDMI-QAM-IPLL User Manual

The 1 / 2 / 4 Channel 4K Encoder Modulator Series is Thor Broadcast's new broadcast solution that integrates H.264/H.265 video encoding and digital RF modulation in a single unit. These devices convert HDMI video and audio signals into digital RF television channels, IPTV streams, and ASI transport streams, enabling flexible distribution over coaxial RF networks or IP infrastructure.

• manual-h-4k-quad-mod-4-.pdf

IP Broadcast Decoders

DecodePro 4K - Professional 4-Channel 4K IP Video Decoder with HDMI, SDI, VGA output. This decoder takes those video streams from the internet or a local network, which might be coming from a camera, an encoder, or a media server, and converts them back into normal video signals that you can plug into a monitor, TV, or professional display system.

• decodepro-4k-video-decoder-manual-.pdf

IP Network Encoders

The SPARTAN-1 is an IP streaming device equipped with a single input port capable of supporting HDMI, CVBS, and SDI inputs. It is specifically designed to support MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding, ensuring high-quality video and audio output. Additionally, this device supports a range of popular streaming protocols, such as UDP/RTP (Unicast/Multicast), HLS, RTMP, and HTTP in Low Latency, making it an ideal solution for streaming over local area networks (LAN) or over the internet.

• H-SPARTAN-1 - USER MANUAL

The Thor Broadcast H-H264IP-E RTSP network encoder is a real-time encoding device for IP broadcasting over LAN or the Public Internet. The signal source could be from a STB, PC, TV, etc. via HDMI, and it will transport the live program through the Internet/LAN output. This LAN broadcast can be received by any phone, tablet, or PC. This Thor network encoder lets you access your IP STB, PC, or TV anywhere to watch your stream of content. The device supports HDMI/YPbPr/S-Video/AV/USB input and encodes in MPEG 4 AVC/H.264 format. This H.264 IP signal will output over UDP, RTP/RTSP, HTTP, and HLS.

• H-H264IP-E Network Encoder for IP Broadcast Over Public Internet Manual

Thor NetLink Mini SDI is a simple solution for an SDI IPTV H.264/H.265 encoder-streamer for LAN and WAN. It is designed for video streaming, live broadcasting, tele-education, telemedicine, etc. It supports UDP unicast/multicast, RTMP, HTTP, ONVIF, RTP, HLS, SRT transmission, and point-to-point as well as point-to-multipoint transmission.

• netlink-mini-user-manual-.pdf
• netlink-mini-user-manual-.pdf

Real-time Network Encoder with 4 and 8 HDMI HDCP-compliant Inputs for IPTV Streaming. The unit has a built-in IPTV server and supports multiple IP streaming protocols like UDP, RTSP, HLS, HTTP, and RTMP for direct streaming over LAN and WAN. Supports full HD 480i / 720p / 1080i / 1080p and H.264 video encoding

• H-8HDMI-IPCAST - USER MANUAL

IP to CATV Edge Modulators

CABLE TV Headend in a Box. QAM modulator for IP Edge QAM / ATSC / DVB-T / ISDB-T applications. This 1RU chassis has 2 GE inputs with an SFP interface, allowing up to 1024 channels of TS streams over UDP / RTP, unicast, and multicast streams. Maximum input for each GE input is 840 Mbps, which will be output through the RF output on 16 non-adjacent QAM carriers in the range of 50-960MHz.

• H-IPRF-16-QAM - USER MANUAL

The H-IPRF-4QAM is a compact IP-to-RF gateway that conveniently takes your UDP/RTP TS and converts it to digital CATV RF QAM, ATSC, or DVB-T & ISDB-T.

• h-iprf-4qam-user-manual-v3.0.pdf.pdf

IPTV streams to 32 analog channel modulator for modulation of digital IPTV MPTS or SPTS streams, converting digital programs to analog NTSC modulated channels. Most analog modulators have baseband video/audio CVBS inputs. This unique modulator has an IPTV input, decodes those streams internally to analog CVBS format, and modulates them on the NTSC analog channel carriers.

• h-ip-32rf-user-manual-.pdf

Lab Used Broadcast Equipment on sale

The SPARTAN-4 features 4 input ports for HDMI/CVBS and supports MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding. Additionally, it allows playback of TS files through a USB port located on the front of the unit. Supporting up to 1080/60P Full HD resolution, it is compatible with UDP/RTP (Unicast/Multicast), HLS, RTMP, and HTTP protocols, offering low latency.

• h-spartan-4-user-manual.pdf

LAN Video Extenders HDMI SDI

The H-HDMI-KVM-Tx/Rx HDMI extender, including the transmitter and receiver set + power supplies, is used over RJ45 to extend the transmission of HDMI, analog audio signals, and USB over CAT cables. It can be used in many applications, including KVM (keyboard, video, mouse) connections between PCs and monitors, extending up to 200 meters (approximately 600 feet) over twisted-pair LAN RJ45 CAT5e/6 cables or through switches. This setup allows both point-to-point and point-to-multipoint configurations.

• h-hdmi-kvm-tx-rx-user-manual.pdf

Optic Splitters Couplers CWDM Muxes

Managed Fiber Optic Switch for System Redundancy

Optical Meters, Test Equipment, Accesories

Cable CATV RF QAM, ATSC, Analog NTSC/PAL Tester/Digital Signal Level Meter

• H-RF-MET User Manual CATV RF QAM ATSC Analog NTSC Meter

Past Generation Equipment

The Thor CMOD series is a compact HDTV digital channel modulator with a licensed Dolby AC/3 encoding chip. Supports full HD encoding in MPEG-2 or H.264 formats on HDMI & component inputs. USB DVR and looping file-based playout supported. Different firmware is available for different RF standards: DVB-C, QAM, ATSC, DVB-T HDMI HDCP licensed, so you can connect any of your devices via the installed HDMI cable

• H-AC3-CMOD-QAM-LL Manual

H-HDMI-RF-Petit-IR Compact Universal Digital QAM, ATSC RF Encoder, and RF Modulator w/ IR return path and HDMI loop-out to control an HDMI video source remotely over the coax (Application Example: The modulator and cable TV box HDMI source can be located in one place, and a user can send commands from the STB remote control and change the channel on the STB from any other location where the TV is located over the coaxial network, so the modulator sends RF channels to all TV locations, and IR can be sent from the TV to the STB over the same coax wiring)

• manual-h-hdmi-rf-petit-ir.pdf

H-8IP-8CVBS is a digital decoder designed by Thor to decode IP streams to 8 composite video baseband streams.

• h-8ip-8cvbs-manual.pdf

2 Ch HD-SDI encoder modulator with ASI multiplexer and RF / IP / ASI output. For digital channel generation and real-time encoding applications for broadcast and digital video distribution.

• h-1-4hdmi-1-4-sdi-qam-ipll-user-manual.pdf

The HD IRD is THOR's all-in-one device that integrates demodulation, descrambling, re-mux, and decoding in one chassis to convert 2 RF signals (DVBS/S2 and ATSC) into audio/video (CVBS / YPbPr / HDMI / SDI / ASI) outputs. - LINK to the REPLACEMENT: H-IRD-V3 https://thorbroadcast.com/product/ird-satellite-or-atsc-decoder-to-sdi-ip-asi-8230.html

• h-ird-v3-atsc-dvbs2-manual.pdf

1 Ch HDMI HD Encoder + CATV QAM or ATSC (8VSB) Modulator with ASI Multiplexer and RF / IP / ASI Output. For digital channel generation and real-time encoding applications for broadcast and digital video distribution.

• User Manual

Dual-channel single-depth encoder cards for Thor modulator chassis systems. Provides up to 4 channels of HD encoding from Component YPbPr inputs.

• User's Manual

The H-IP-HDMI is a Managed IP Video Decoder that can intake a TS signal and decode almost any incoming HEVC, H.265, H.264, and Mpeg-2 stream at up to 1920x1080@ 60fps and 3840x2160@ 30fps. It supports various protocols, including IPv4/v6, TCP, UDP, HTTP, HLS, RTP, RTSP, RTMP, FTP, and IGMP (Multicast). This allows you to interface with and broadcast from all types of websites, encoders, servers, and hosts, from YouTube to private UDP streams. The unit comes equipped with a GUI interface, so you can access it remotely.

• h-ip-hdmi-user-manual-.pdf

Thor's 1, 2, 4, 6, and 8x HDMI Digital RF Modulator CC is your all-in-one solution. It seamlessly encodes and modulates audio/video signals into ATSC/DVB-C/QAM/DVB-T/ISDB-T RF output. Enjoy Low Latency Mode for live events, HDCP compliance, and compatibility with any HDMI source, including DVD players or cable/satellite STBs, up to 1080p/60 resolution. Elevate your experience with Thor.

• h-hdcoax-1-2-4-6-8-user-manual.pdf

The H-IP-HDMI is a Managed IP Video Decoder that can take in a TS signal and decode almost any incoming HEVC, H.265, H.264, and MPEG-2 stream at up to 1920x1080@ 60fps and 3840x2160@ 30fps. It can decode various protocols, including: IPv4/v6, TCP, UDP, HTTP, HLS, RTP, RTSP, RTMP, FTP, and IGMP (Multicast). This will allow you to interface and broadcast from all types of websites, encoders, servers, and hosts; from YouTube to private UDP streams. The unit comes equipped with a GUI interface so you can access it remotely.

• H-IP-HDMI - USER MANUAL

Stand-alone H-HDMI-CC-RF unit has HDMI input up to full HD 1080p/60 + CVBS base-band video input for CC - closed captioning input, and supports QAM/ATSC/DVB-T/ISDB-T modulation standards. All the video/audio encoding parameters and modulation channels are controlled via 10/100 standard Ethernet and web interface.

• h-hdmi-cc-rf-user-manual.pdf

2 mW fiber optic RF transmitter for television carrier signals or any other RF in the 45-870 MHz band. Transmits full-band signals with a linear response.

• User's Manual

Pro-DVB Encoders

Thor MPEG-2/H.264 HD Encoder is a new broadcast audio & video encoding and multiplexing device with powerful functionality. It has multiple video input interfaces (SDI, CVBS, YPbPr and HDMI) and 4 audio input interfaces (AES, RCA and XLR). It supports 4 stereo (8 mono) audio inputs embedded and mixed with the video to form a stream output. The encoded program outputs as a TS (transport stream) through the ASI/IP port simultaneously.

• H-MPEG2-H264-E2 - USER MANUAL

Low-latency, high-density HD encoding and multiplexing system for headend program generation. Accepts 8 HD-SDI inputs at up to 1080p60 and offers 9 IP outputs (8x SPTS, 1x MPTS) and dual ASI outputs containing all encoded programs. Also includes an ASI input for multiplexing an SPTS program with the outputs.

• H-8HD-EMS-8-HD-SDI BROADCAST ENCODER - USER MANUAL

1 Ch HD-SDI or HDMI MPEG2/H.264 encoder that generates a multiplexed ASI & IPTV output formatted specifically for US television standards. Supports closed captioning 708 (SDI only) and Dolby Digital AC3 audio encoding for maximum efficiency in production.

• H-1HD-EMS / 1HD-EMH USER MANUAL

The Spartan-2 has dual selectable inputs for HDMI and SDI and encodes in Mpeg4 AVC/H.264 video and Mpeg1 L2, AAC, and AC3 audio.

• H-SPARTAN-2 USER MANUAL

H-HDPerformux-XX is an affordable, high-density H.264 and H.265 - High Efficiency Video Coding (HEVC) multi-channel IP encoder. The HDMI HDCP-enabled IPTV streaming HD encoder & integrated multiplexer is a 1RU platform. Outputs up to 24 SPTS UDP or RTP (RTSP), 1MPTS, and encodes HD video from any HDMI source into IPTV streams. The video encoding rate is adjustable from 1-20Mbps, with ASI input and output (copy of MPTS)

• H-HDPerformux USER MANUAL

Broadcast-quality SD program encoding from analog composite baseband video inputs on BNC terminals with stereo audio. All programs are multiplexed to MPTS outputs on ASI and IP. SPTS outputs are available for all programs on IP. All settings are managed through the LCD panel or web management.

• H-4AV-SDE-4CVBS ENCODER - USER MANUAL

Thor IPTV Gateway is a device used for protocol conversion and streaming media distribution scenarios. It is a matrix converter between UDP, HLS, RTMP, HTTP, RTSP, and RTP.

• H-IPTV-GATEWAY - IPTV-UDP-TO-HLS-GATEWAY - USER MANUAL

High-quality & high-density 24-channel SD encoder with analog composite base-band video inputs using RCA terminals for stereo audio, with output via UDP/RTP unicast and multicast formats

• H-24AV-IP - USER MANUAL

Low Latency Thor H-4HD-EMS is a 4 Ch HD-SDI MPEG2/H.264 encoder that generates a multiplexed ASI & IPTV output formatted specifically for US TV standards. Supports MPEG2 / MPEG4, closed captioning, and Dolby AC3 audio encoding up to 1080p@60 resolution

• H-4HD-EMS and H-4HD-EMH USER MANUAL
• H-2HD-EMS and H-2HD-EMH USER MANUAL

Low-latency, HDCP-compliant, high-density HD encoding and multiplexing system for headend program generation. Accepts 8 HDMI inputs at up to 1080p60 and offers 9 IP outputs (8x SPTS, 1x MPTS) and dual ASI outputs containing all encoded programs. Also included is an ASI input for multiplexing an SPTS program with the outputs; passes HDCP.

• H-8HD-EMH-8-HD-SDI BROADCAST ENCODER USER MANUAL

RF CATV and IPTV OTT STB's

RF QAM or ATSC to HDMI converter - Digital TV Converter Set Top Box - Unique Universal cable TV QAM and Off-Air ATSC RF IRD Integrated Receiver Decoder and PVR Recorder. Works as ATSC to HDMI and Analog RF and QAM to HDMI and Analog RF Demodulator (DEMOD)

• h-stb-qam-atsc-user-manual.pdf

RF Decoders IRD's

Four independent RF tuners demodulate the entire carrier band frequency to IPTV MPTS, ASI, and CATV QAM. High-density program stream IRD for satellite, terrestrial ATSC, DVB-T, ISDB-T, and QAM cable TV applications. ASI input for multiplexing additional TS programs to output simultaneously. 5 different RF tuner options available: ATSC, DVB-S2, DVB-T, ISDB-T, or QAM (model dependent)

• h-ird-v4-manual.pdf

This is a family of products equipped with 16 RF tuners. Tuners can decode the following: QAM Annex A&B, DVB-T, DVB-T2, ISDB-T; model-dependent units: ATSC, DVB-S/S2 The unit works as an RF-to-IP gateway and can output IP SPTS multicast or uni-cast. CONVERT 16 CATV RF to IP

• h-16qam-ip-rf-gateway-user-manual.pdf

High-end, state-of-the-art decoder with RF tuner, advanced IP streaming, front LCD confidence monitor, and support for 608 and 708 closed captioning. RF tuners for DVB-S2, ATSC, and QAM are available. All settings and alarm information are available through a web browser-based network management console.

• h-ird-v3-2023-model-user-manual.pdf
• h-ird-v3-s2-user-s-manual.pdf
• h-hd-ird-v3-atsc-user-s-manual.pdf

SDI

1 Channel forward 3G SDI with loop out and Gigabit Ethernet (RJ45) over a single fiber (single mode) up to 20/40/80/120 km transceiver. The unit allows transmission of SD/HD/3G SDI up to 1080p/60 from the transmitter to the receiver while simultaneously extending Gigabit Ethernet connectivity between the two locations. The 12G 4K version is available (model dependent).

• f-m1sdi-3g-et-txrx-user-manual.pdf

Transmit SD, HD, and 3G-SDI video signals over fiber optic cable with zero compression and ultra-low latency. Supports up to 1080p60 for broadcast and professional video applications.

• F-M1SDI-3G-TxRx User Manual

The F-M1SDI-TR-ET is a high-performance, reliable, 1-channel bidirectional HD-SDI video optical transceiver + 10/100 Ethernet transceiver over a single fiber, which performs real-time, loss-free, high-quality SDI video and Ethernet transmission over a single-mode optical fiber.

• F-M1SDI-TR-ET User Manual

4CH bi-directional HD-SDI + external audio and RS232/422/485 control data over a single fiber

• Product user manual

These multi-functional bi-directional fiber optic transceivers Cobra II support SD, HD, 3G, 12G-SDI video with LOOP OUT, 3.5mm stereo analog audio, RS232/485/422 data, and A tally light, also known as a tally indicator or tally lamp signals over only one single mode fiber, thanks to optical CWDM multiplexing. All of this is achieved with zero delay and no compression, providing uncompressed high-quality signals over fiber for distances of up to 10km.

• f-12g-a-d-tr-txrx-manual.pdf

The F-M2SDI transmitter and receiver set transports two full channels of HD-SDI or SD-SDI over fiber cable. It provides a return-path RS-485 channel, as well as an auxiliary port that can support audio, RS-232/422, or contact closure.

• F-M2SDI-TX/RX Manual

The F-SDI-PG is an SD/HD/3G-SDI pattern generator that supports 2970Mb/s, 1485Mb/s, and 270Mb/s color bar patterns with a moving circle and embedded 1 KHz audio.

• thor-broadcast-sd-hd-3g-sdi-signal-generator-manual.pdf

(SD/HD-SDI coax-to-fiber) throw-down converter. Transmits multi-rate SD/HD-SDI video, up to 1.485Gb/s, over one strand of single mode optical fiber at extended distances up to 80Km, better than a rattler. F-M1SDI transmitter and receiver kit for transporting HD-SDI, SD-SDI, or DVB-ASI digital broadcast video signals over fiber cable. Provides 1 channel of RS-485 control data over a return path from the Rx back to the Tx.

• F-M1SDI-TxRx User Manual

4 Ch Mini HD-SDI Fiber Optic Kit with Aux The F-M4SDI transmitter and receiver set transports four full HD-SDI, SD-SDI, or DVB-ASI digital video signals over fiber. Provides a return-path RS-485 in addition to an Aux port that optionally supports audio, RS-232/422, or contact closure.

• F-M4SDI-TxRx User Manual

The F-1MSDI-2ET-TX/RX is a 1-channel HD-SDI video + 2 10/100 bi-directional transceiver over single fiber, which performs real-time, loss-free, high-quality video transmission over optical single-mode fiber. It provides two 10/100Mb/s Ethernet data connections (shared transmission), which can be widely used in TV live broadcast, high-definition video conferencing, and high-definition video monitoring; in addition, it also transports 1 RS485 and two optional analog audio. You can purchase AUX to further enhance the settings on these units.

• F-M1SDI-2ET User Manual

SDI converters, SDI modulators

12 HD/SD/3G-SDI with 608/708CC (Closed Captioning) CATV RF MODULATOR is a Pro-DVB, multi-level integrated device that includes encoding, multiplexing, scrambling, and modulation.

• 12-HDMI/SDI Modulator - USER MANUAL

Converts one to four HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in 8VSB ATSC format for U.S. over-the-air OTA.

• H-1/2-SDI-ATSC-IPLL - USER MANUAL
• H-4-SDI-ATSC-IPLL - USER MANUAL
• H-2/4 HDM/SDI-ATSC-IP USER MANUAL

Converts one or more HD-SDI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP (UDP, RTP, RTSP), & RF in QAM-256 J.83A/B/C for US cable format or DVB-C.

• H-1/2-SDI-QAM-IPLL- USER MANUAL

SDI SD/HD/3G with CWDM

8x8 3G SDI HD/SD-SDI Matrix Switcher

• 8x8-3g-sdi-hdsd-sdi-matrix-switcher-user-manual-h-8x8sdi-sw.pdf

4-channel HD-SDI high-definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high-density systems.

• f-4sdi-3g-4channel-cwdm-3g-sdi-fiber-optic-transmitter-receiver-user-manual.pdf

Transcoders, MPEG Converters, IP ASI Gateways

Flexible gateway allowing the following conversions: ASI to IP, IP to ASI, and it can also decode IP or ASI inputs to video as SDI or HDMI simultaneously

• H-ASI-IP-B-V3 User manual

Dedicated hardware transcoding solution for matrix conversion between MPEG-2 and H.264. Can convert up to 8 programs between MPEG-2 and H.264 and supports HD to SD scaling. Available with 8 RF tuners or 6 ASI inputs.

• h-8ts-hwtc-user-manual.pdf

8 SD or 4 HD program transcoder; unit has RF tuners: 6 ATSC or 6 QAM or 6 DVBS2 or 6 ASI inputs. This is a professional bidirectional transcoder to convert video between H.264 and MPEG-2 formats and also to transcode between HD and SD programs simultaneously. It is equipped with 6 tuner inputs and an IP input to receive digital channels. After transcoding, it outputs MPTS & SPTS through the DATA port or ASI port.

• h-8ts-atsc-user-manual.pdf

2x1 RF Redundancy Switch with Automatic and Remote Network Switching Functions

• thor-catv-rf-auto-redundancy-failover-switch-user-manual.pdf
• h-rf-switch-user-manual.pdf

Video, Audio, HDMI, SDI Switchers Converters

Thor Broadcast H-8x8HDMI-SW rack-mount or standalone 8x8 HDMI switcher with remote, multiple control options, and an easy-to-use GUI. Now you can use an HDMI matrix switcher to control up to 8 different HDMI sources going to 8 different HDMI screens. Simple setup and smart EDID management; HDCP 1.4 compliant, HDMI 1.3a version, with resolutions up to 1080p 60hz.

• 8x8-hdmi-switcher-h-8x8hdmi-sw-user-manual.pdf

Thor Broadcast H-16x16HDMI-4K-SW is a professional 16x16 HDMI matrix switch that routes up to 16 HDMI sources to 16 UHD displays with 4K@60Hz resolution. Features include IR, RS232, LAN, and Web GUI control, plus EDID management and rack mount design.

• H-16x16HDMI-4K-SW - USER MANUAL