| Disponibilidad: | En stock | Condición: | nuevo |
|
| Envío: | starting at $0.00 | Garantía: | 2Yrs |
Convenient and compact HDMI to RJ45 converter's that can be used in a variety of applications for sending HDMI video over existing ethernet cables. Simple plug and play means you never have to waste time and energy setting up or troubleshooting the devices. Capable of sending your HDMI 2.0 signal up to 150m on Cat6 means these little powerhouse units can help you distribute content in offices, schools, airports, detainment centers, and conference centers. Utilized for top HD content, these units can go up to 4k resolution at 60 frames per second to keep your original content from being downscaled. Easily construct applications with one to one or one to many arrangements, with IR already installed you can use the receiving ends of these units to control the original source. These units will work on Cat5 up to about 120m and can be directly connected to switches, so with enough switches and relay's you can play these through vast environments with easy setup and installation.
H-HDMI-TX HDMI over Ethernet CAT5 transmitter with IR receiver
H-HDMI-RX HDMI over Ethernet CAT5 receiver with IR sender
Kits come with TX, RX power supplies and IR emitter and IR receiver
| Items | Specification |
| Voltage/Current | DC5V/3A |
| Power consumption | TX:<8W RX:<10W |
| HDMI compliance | HDMI2.0 |
| HDCP compliance | HDMI2.0 |
| HDMI input resolution supported |
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz,
4Kx2K @24/25/30/60Hz
|
| HDMI output resolution supported | 1080p@60Hz?4Kx2K@30/60Hz |
| Audio formats supported | L/R stereo audio |
| Maximum transfer rate | 18Gbps |
| Input and output TMDS signal | 0.7~1.5Vp-p(TMDS) |
| Input and output DDC signal | 5Vp-p(TTL) |
| Transmission length | 120m |
| Input cable length supported | ≤5m(AWG24) |
| Output cable length supported | ≤5m(AWG24) |
| IR remote control | Supports IR passback with 20~60KHz frequency |
| Transfer method | Over UTP/STP CAT5/5e/6 |
| Connector | RJ45 |
| Delay | ≤200 ms |
| Electrostatic protection of the whole machine |
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
|
| Working temperature | 0~50°C |
| Storage temperature | -10~70°C |
| Humidity (no condensation) | 0~90% |
| Dimension | 103(L) x97.5(W) x 24.8(H)mm |
| Material | Iron alloy material + crystal panel |
| Finishing | Grit blast |
| Color | Black |
| Weight | TX:240g, RX:240g |
| Mean time between failures (MTBF) | >30,000 Hours |
KVM + HDMI + Analog Audio + USB over CAT5e/6 LAN Extender 200 meters
An H-HDMI-KVM-Tx/Rx HDMI extender, includes the transmitter and receiver set + power supplies, is used over RJ45 to expand the transmission of HDMI, analog audio signals, and USB over CAT cables. It can be used in many applications, including KVM (keyboard, video, mouse) connections between PCs and monitors, extending up to 200 meters (approximately 600 feet) over Twisted Pair LAN RJ45 CAT5e/6 cables or through switches. This setup allows for both point-to-point and point-to-multipoint configurations.
USB 2.0 Over Ethernet Extender
Extend USB 2.0 up to 50 meters over a single CAT5e/6/7 cable. plug-and-play USB connectivity with 4-port USB hub receiver. Perfect for AV, KVM, and remote USB device installations.
EN
