| Disponibilidad: | Check availability | Condición: | nuevo |
|
| Envío: | a partir de $10 | Garantía: | 5Yrs |
The maximum total output power of the whole EDFA can reach +36dBm, and it supports up to 32 outputs, with an optional optical switch, CWDM, and RF detection. It provides SNMP protocol network management software and WEB network management, suitable for amplified transmission of downstream 1550nm optical signal in FTTH network.
|
Item |
Unit |
Parameters |
Comments |
|
|
Operating bandwidth |
nm |
1545 - 1565 |
|
|
|
Optical input power range |
dBm |
-5 ~ +10 |
|
|
|
Maximum optical output power |
dBm |
36 |
|
|
|
Output power stability |
dBm |
±0.5 |
|
|
|
Noise figure |
dB |
≤ 6.0 |
Optical input power 0dBm |
|
|
Return loss |
Input |
dB |
≥ 45 |
|
|
Output |
dB |
≥ 45 |
|
|
|
Optical Connector Type |
|
SC/APC |
|
|
|
C/N |
dB |
≥ 50 |
Test condition according to GT/T 184-2002 |
|
|
C/CTB |
dB |
≥ 63 |
||
|
C/CSO |
dB |
≥ 63 |
||
|
Power supply voltage |
V |
AC160V - 250V (50 Hz), DC48V |
|
|
|
Power consumption |
W |
≤ 65 |
|
|
|
Operating Temperature Range |
C° |
-10 - +45 |
|
|
|
Storage Temperature Range |
C° |
-30 - +70 |
|
|
|
Maximum operating relative humidity |
% |
Max 95% No Condensation |
|
|
|
Dimension |
mm |
437(L)× 442(W)×44(H) |
|
|
DWDM Pre-amplificador EDFA
El PA EDFA se utilizan antes de la óptica del receptor para amplificar la se?al óptica DWDM y aumentar el presupuesto óptico y la distancia de transmisión en fibra.
EN
