Transporte SDI y Ethernet a través de una sola fibra

Q: Regarding the F-M1SDI-2ET-TX/RX and F-M1SDI-TR-ET: What are the possible applications for the second ethernet port on the F-M1SDI-2ET-TX/RX? Is there configuration or control for this unit via a GUI through the second ethernet port?

The unit does not need any control, it works almost like a passive device, whatever is coming in, is going out on the other side. The second ethernet port is for convenience, you can connect different devices to it ..The ethernet ports are merged together on both sides, they act as an unmanaged transparent switch or transceiver. Furthermore, there is a lot of camera's that have RS control, some newer models actually have control from ethernet so these units are easier to use for that purpose. This is a similar unit but only with one Ethernet port, with HD SD SDI going both directions https://thorbroadcast.com/product/1-bi-directional-hd-sdi-and-10-100-ethernet-rs485-audio-8230.html

Q: Could you manufacture the following device? Requirements: 1 Chan Bi-Directional 3GSDI Video 1 Channel Bi-Directional Audio 1 Channel 10/100 Ethernet Singlemode Fiber 10 km range ST Fiber Connector Preferred

These units, the F-M1SDI-TR-ET utilize a multiplexing method called TDM; while less expensive it has limitations up to 1.5Gbps on video and 10/100 on Ethernet. If you need 3G-SDI for Video or Gigabit for ethernet, we need to use this chassis which uses CWDM multiplexing. https://thorbroadcast.com/product/1-8-channel-flexible-hd-sdi-analog-video-audio-rs-data-etherent-8230.html We charge per wavelength on those custom units, so for 2 Video, 1 Gig, and Bidirectional Audio, would be 4 Wavelengths per side. 8 total; If the first option would be okay with HD-SDI, instead of 3G-SDI; the kit with Audio Aux cards. But if we install an external Audio card, the SDI will loose its embedded Audio, it is embedded or external, not both Please let me know if that would work for you and if you need a formal quotation.

Q: Noted for the aux workflow. I need both of RS422 and RS232 data and Etherent

The devices that come with Etherent ports and unidirectional return RS485 (from RX to TX) have only one internal slot for additional AUX cards. The AUX204 card supports 1-channel bidirectional RS422, and the card is needed on both the TX and RX sides. The AUX205 card supports 2-channel bidirectional RS232, and the card is also needed on both the TX and RX sides. Therefore, we cannot place AUX205 and AUX204 on the same devices at the same time.

Descripción

El F-1MSDI-2ET - 1 HD-SDI + 2 Ethernet 10/100 + RS 485 + ( Audio Analógico opcional) a través de una única fibra Extensor

1 Unidireccional HD-SDI
2 Compartida Bi-direccional 10/100 Ethernet (2 Puertos RJ45)
1 Uni-Direccional RS485 (Tx a Rx)
2 Analógicas de Audio (opcional)

El Thor de Fibra de F-M1SDI-2ET es un compacto de la casa de la potencia que permitirá a cualquier usuario de transporte de un canal único de 1.485 Gbps HD-SDI Interfaz de Datos Serial uni-direccional, mientras que simultáneamente la transmisión de dos fast Ethernet 10/100Mb/s de datos. Además, este Thor Fibra Kit de Transmisor y Receptor enviará RS485 a la inversa para un fácil control sobre el kit. Esta robusta unidad crea un fácil caer medio ambiente para los usuarios que requieren HD-SDI y SDI Dual Fast Ethernet a través de cualquier aplicación, e incluso permite adicionales AUX Tarjetas que pueden permitir una gran cantidad de otras opciones, tales como RS232 y RS422, e incluso capaz de llevar externa de audio analógico en lugar de la de audio SDI embebido. Thor Fibra tiene una excelente reputación por la alta calidad y el bajo costo de los productos para ayudar a completar el proyecto a tiempo, en una pérdida de conexión de alta calidad kit que te aseguran una estancia bajo presupuesto. Utiliza comúnmente en aplicaciones de seguridad, la actuación en vivo de los entornos, video vigilancia, SDI de control y distribución en cualquier entorno.

Las unidades podrían tener 2 diferentes factores de forma

Independiente
La hoja de la Tarjeta - CA

La Base del Modelo F-M1SDI-2ET-TX/RX de soporte del solo modo de fibra de hasta 20 km y dispone de ST/PC conector

Tags: Fiber Optic Multiplexer SDI over Fiber

Caracteristicas

SMPTE 292M estándar HD-SDI, admite 1.485 Gb/s
Transmisor: SD/HD-SDI (BNC), uno de bucle SD/ HD-SDI(BNC) y dos interfaces fast Ethernet(compartido 100M de ancho de banda, soporte VLAN basada en puertos)
Receptor: dos SD/HD-SDI (BNC) y dos interfaces fast Ethernet(compartido 100M de ancho de banda, soporte VLAN basada en puertos)
Un auxiliar de la tarjeta, que puede ser de 1 canal de audio bidireccional, o de dos canales de audio unidireccional, o de 2 canales de cierre de contacto de entrada/salida, o de 1 canal bi-direccional RS422/RS232 canal
Uno bidireccional RS485 canal, half duplex, hasta 115.2 Kb/s velocidad en baudios
Soporta [email protected], [email protected], [email protected]
Integrado por cable ecualizador
Integrado ESD y de sobretensión circuito de protección para evitar da?os por estática y el trueno
NOP (No hay se?al óptica) indicaciones de alarma, indicador de estado de salida y de entrada indicador de bloqueo
APC circuito estable de potencia óptica
Las unidades también están disponible como (tarjetas) de cuchillas para nuestros 17 ranuras U3 de 19" para montaje en rack chasis.

Dibujos

Selección de modelo

Además Disponible AUX Tarjetas: - (Externa de Audio Analógico, 10/100 Ethernet, Gigabit Ethernet, RS-422, RS-232) (agregue $)

AUX selección de cartas:

AUX204				1-canal bidireccional RS-422
AUX205				2-canal bidireccional RS232
AUX206				2-canal de audio bidireccional
AUX207				2-canal unidireccional de salida de audio
AUX208				2-canal unidireccional de entrada de audio
AUX211				4-canal unidireccional de entrada de audio
AUX212				4-canal unidireccional de salida de audio
AUX201				2 canales de entrada de contacto seco
AUX200				2-canal de salida de contacto seco

Especificación

De Entrada HD-SDI	1 HD-SDI, SD-SDI 0 - 1,5 Gbps Serie Digital De La Se?al
Número de Entrada	1 SDI (Uni-Direccional) 1 RS-485 2 Auxiliar 2 10/100 Etherent Compartida (RJ45)
El Nivel De La Se?al	> 380mVp-p
Impedancia	75 ?
Conector	BNC
Distancia	A 20 km (40, 60, 100 km Disponibles )
Caja Mini	25×116×110
Fuente De Alimentación	130 - 260 VAC @ 50 Hz a 60 Hz
El Consumo De Energía	<10W
La temperatura	0 a +70 Grados
La humedad	0 a 95%
Conector	ST/PC, o ( FC/PC o SC/de la PC o de SC/APC opcional)
Los Canales Ópticos	TDM tipo
RH LED de Estado del Índico	Sin condensación Encendido, Enlace

Question and Answers

Answer:
The unit does not need any control, it works almost like a passive device, whatever is coming in, is going out on the other side. The second ethernet port is for convenience, you can connect different devices to it ..The ethernet ports are merged together on both sides, they act as an unmanaged transparent switch or transceiver. Furthermore, there is a lot of camera's that have RS control, some newer models actually have control from ethernet so these units are easier to use for that purpose. This is a similar unit but only with one Ethernet port, with HD SD SDI going both directions https://thorbroadcast.com/product/1-bi-directional-hd-sdi-and-10-100-ethernet-rs485-audio-8230.html

Answer:
These units, the F-M1SDI-TR-ET utilize a multiplexing method called TDM; while less expensive it has limitations up to 1.5Gbps on video and 10/100 on Ethernet. If you need 3G-SDI for Video or Gigabit for ethernet, we need to use this chassis which uses CWDM multiplexing. https://thorbroadcast.com/product/1-8-channel-flexible-hd-sdi-analog-video-audio-rs-data-etherent-8230.html We charge per wavelength on those custom units, so for 2 Video, 1 Gig, and Bidirectional Audio, would be 4 Wavelengths per side. 8 total; If the first option would be okay with HD-SDI, instead of 3G-SDI; the kit with Audio Aux cards. But if we install an external Audio card, the SDI will loose its embedded Audio, it is embedded or external, not both Please let me know if that would work for you and if you need a formal quotation.

Answer:

The devices that come with Etherent ports and unidirectional return RS485 (from RX to TX) have only one internal slot for additional AUX cards.

The AUX204 card supports 1-channel bidirectional RS422, and the card is needed on both the TX and RX sides.

The AUX205 card supports 2-channel bidirectional RS232, and the card is also needed on both the TX and RX sides.

Therefore, we cannot place AUX205 and AUX204 on the same devices at the same time.

Documentos

F-M1SDI-2ET User Manual

thor-fiber-sdi-optical-extenters-model-selection.pdf

Disponibilidad:	En stock	Condición:	nuevo
Envío:	starting at $0.00	Garantía:	2Yrs

1 HD-SDI + 2 Ethernet 10/100 +RS485 + Audio a través de una única fibra TX/RX