| Disponibilidad: | En stock | Condición: | nuevo |
|
| Envío: | starting at $0.00 | Garantía: | 2 Years |
While NTSC is quickly becoming legacy equipment, there is still a need for headends requiring analog modulation. This unit simplifies installation due to its high-density capacity of 16 independent inputs.
The inputs are in CVBS RCA baseband video/audio inputs. Analog CVBS inputs can be connected from devices such as security cameras, DVD/VCR players, set-top boxes, old video players, or older gaming systems like Playstation and Nintendo 64.
The high-power RF output allows for video distribution to multiple TVs on the same coax network without requiring RF amplifiers. Common applications include video security monitoring, hotels, motels, education, private anonymous channels, music channels, radio channels, and coax network testing.
The unit is SAW filtered and microprocessor controlled with an output capability of 860MHz. Setup and tuning are easy and simple via the front panel. It offers high performance, low cost compared to digital modulators, and a compact design for system operators. Additionally, it features an RJ45 port for Ethernet connection to the NMS management system, allowing you to manage, remotely access, and change settings.
H-16RCA-RF-AMOD - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator
H-16RCA-RF-AMOD-PAL - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator
Similar model but with HDMI inputs:
H-16HDMI-RF-AMOD - 16 HDMI Inputs - 16 Analog RF Out (NTSC)
H-16HDMI-RF-AMOD-PAL - 16 HDMI Inputs - 16 Analog RF Out (PAL)
https://thorbroadcast.com/product/16-hdmi-to-analog-agile-catv-rf-modulator-ntsc-8230.html
|
OUTPUT |
|||||
|
RF |
Output Connector |
F Connector @ 75Ohms |
|||
|
Output Frequency |
45~860MHz any 16 channels |
||||
|
Output Level |
113 dBµV (Adj.) = +53dBmV |
||||
|
Out-band Rejection |
≥60dB |
||||
|
A / V Ratio |
-21~ -18 dB (Adj.) |
||||
|
Frequency Stability |
±5kHz |
||||
|
Test Point |
-20 dB ±3dB |
||||
|
INPUT
|
|||||
|
VIDEO |
Video-Input Level |
0.6-1.5Vp-p (87.5% Modulation) |
|||
|
Input Connector |
1x Yellow RCA Jack |
||||
|
Video C/N |
60dB |
||||
|
AUDIO |
Input Level |
0.8Vp-p(25KHz Peak Deviation) |
|||
|
Input Connector |
1x White RCA Jack |
||||
|
GENERAL |
|||||
|
POWER AND SIZE |
Voltage |
AC 90 ~ 264V @ 47~63Hz |
|||
|
Power Consumption |
100W |
||||
|
Cooling Fans |
3 |
||||
|
Dimension |
48.4*32.9*4.44 (CM) |
||||
|
Carton Size |
55*39*13 (CM) |
||||
|
Shipping Weight |
12lb (6KG) |
||||
MaximusControl - Professional Grade Video PTZ Controller Sale
The Thor MaximusControl is the essential accessory for your Thor PTZ Camera. This control center is a professional-grade video PTZ controller with built-in support for VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control can independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, allowing you to adapt and control cameras from various manufacturers using the same controller. It can simultaneously control PTZ functions for up to 7 different cameras and protocols.
HDMI Modulator with return remote control IR - Digital Full HD 1080p ATSC, QAM J.83B, DVB-T, ISDB-T over Coax Sale
The H-HDMI-RF-Petit-IR is a compact universal digital QAM, ATSC RF encoder, and RF modulator with an IR return path and HDMI loop-out for controlling HDMI video sources remotely over coaxial cables. For example, the modulator and cable TV box HDMI source can be located in one place. Users can then send commands from the set-top box (STB) remote control to change the channel on the STB from any other location where the TV is connected over the coaxial network. The modulator sends RF channels to all TV locations, and the IR function allows communication from the TV to the STB over the same coaxial wiring.
EN
