While NTSC is quickly becoming legacy equipment, there is still a need for headends requiring analog modulation. This unit simplifies installation due to its high-density capacity of 16 independent inputs.
The inputs are in CVBS RCA baseband video/audio inputs. Analog CVBS inputs can be connected from devices such as security cameras, DVD/VCR players, set-top boxes, old video players, or older gaming systems like Playstation and Nintendo 64.
The high-power RF output allows for video distribution to multiple TVs on the same coax network without requiring RF amplifiers. Common applications include video security monitoring, hotels, motels, education, private anonymous channels, music channels, radio channels, and coax network testing.
The unit is SAW filtered and microprocessor controlled with an output capability of 860MHz. Setup and tuning are easy and simple via the front panel. It offers high performance, low cost compared to digital modulators, and a compact design for system operators. Additionally, it features an RJ45 port for Ethernet connection to the NMS management system, allowing you to manage, remotely access, and change settings.
H-16RCA-RF-AMOD - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator
H-16RCA-RF-AMOD-PAL - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator
Similar model but with HDMI inputs:
H-16HDMI-RF-AMOD - 16 HDMI Inputs - 16 Analog RF Out (NTSC)
H-16HDMI-RF-AMOD-PAL - 16 HDMI Inputs - 16 Analog RF Out (PAL)
https://thorbroadcast.com/product/16-hdmi-to-analog-agile-catv-rf-modulator-ntsc-8230.html
OUTPUT |
|||||
RF |
Output Connector |
F Connector @ 75Ohms |
|||
Output Frequency |
45~860MHz any 16 channels |
||||
Output Level |
113 dBµV (Adj.) = +53dBmV |
||||
Out-band Rejection |
≥60dB |
||||
A / V Ratio |
-21~ -18 dB (Adj.) |
||||
Frequency Stability |
±5kHz |
||||
Test Point |
-20 dB ±3dB |
||||
INPUT
|
|||||
VIDEO |
Video-Input Level |
0.6-1.5Vp-p (87.5% Modulation) |
|||
Input Connector |
1x Yellow RCA Jack |
||||
Video C/N |
60dB |
||||
AUDIO |
Input Level |
0.8Vp-p(25KHz Peak Deviation) |
|||
Input Connector |
1x White RCA Jack |
||||
GENERAL |
|||||
POWER AND SIZE |
Voltage |
AC 90 ~ 264V @ 47~63Hz |
|||
Power Consumption |
100W |
||||
Cooling Fans |
3 |
||||
Dimension |
48.4*32.9*4.44 (CM) |
||||
Carton Size |
55*39*13 (CM) |
||||
Shipping Weight |
12lb (6KG) |
Inexpensive HDMI over fiber transmitter and receiver set. It transports uncompressed HDMI Video/ Audio signal up to 20Km over single mode fiber or up to 3000 feet over multi mode fiber.
The Thor Broadcast H-2ADHD is a compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. Its easy-to-use NMS GUI interface allows you to adjust and manipulate any settings via any web browser, providing full autonomous control of the encoder. It supports full HD 1080p60 encoding from any source using HDMI. The H-2ADHD carries both modulation standards for QAM and ATSC, which are easy to switch between with a simple dropdown menu option inside the GUI. It supports QAM, ATSC, DVB-T, and ISDB-T modulations and is selectable.