Compact HDMI-compliant modulator with loop-out and IR so you can change the source Set Top Box from a different one via a Television. However, you can still use this modulator with any HDMI source like Blu-Ray, Apple TV, ROKU, PC, etc.
You can connect any amount of TV's you want to the RF output and view your programs over your existing coax network in up to 1080p resolution. You can also inject an RF input into the modulator, like an Antenna, and then add your HDMI-sourced product to inject into the ATSC channel lineup on a vacant frequency. This added accessibility along with the IR and digital link passing through your coax network will make adding programs, and adjusting the channel on your STB an easy-to-use solution.
Furthermore, the modulator also has an HDMI loop-out so if you have your unit stationed near a TV, and use the IR to control a second TV, the first TV can be fed with the HDMI input for monitoring or viewing. There is an LCD display with easy-to-use buttons, and of course, there is an RJ45 input so you can add your modulator to the LAN and control it through a WEB GUI. This unit also has all the major RF modulation standards built in, QAM(J83A/B), ATSC, ISDBT, and DVBT.
H-HDMI-RF-Petit-IR
| Encoding Section-Video | |
| Encoding | MPEG2 |
| Interface | HDMI x 2 (1×input/1×loop out) |
| Resolution | Input: 720@50p,720@60p 1080@50I/P,1080@60I/P Output: up to 1080p30 |
| Bit rate | 5-25Mbps |
| Encoding Section-Audio | |
| Encoding | MPEG-1 Layer2, AAC, AC3 |
| Sample rate | 48KHz |
| System | |
| Management | LCD + Control buttons/Ethernet Web GUI |
| Modulation | |
| MER | Typ. 35dB |
| RF range | 50~950MHz, 1KHz step |
| RF output level | 100dBμV (30dB attenuation) |
| Standard | ATSC |
| Constellation | 8VSB |
| Standard | QAM J.83B, annex A , DVB-T, ISDB-T |
| Constellation | 64QAM, 128QAM, 256QAM |
| IR return path connections | |
| RF output | 2 RF outputs (one providing accessory power supply 9 Volts DC for IR pass) |
| DC switch | Power supply 9 Volts DC for IR pass |
| IR OUT | IR emitter output |
| General | |
| Power supply | DC 12V 1A |
| Dimensions | 225*105*41mm |
| Weight | 680g |
HDMI Fiber Extender with IR Sale
Inexpensive HDMI over fiber transmitter and receiver set. It transports uncompressed HDMI Video/ Audio signal up to 20Km over single mode fiber or up to 3000 feet over multi mode fiber.
MaximusControl - Professional Grade Video PTZ Controller Sale
The Thor MaximusControl is the essential accessory for your Thor PTZ Camera. This control center is a professional-grade video PTZ controller with built-in support for VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control can independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, allowing you to adapt and control cameras from various manufacturers using the same controller. It can simultaneously control PTZ functions for up to 7 different cameras and protocols.
ES
