2 HDMI YPbPr HD Digital TV Modulator QAM ATSC DVB-T IPTV 1080p/60 Sale

H-2ADHD-QAM-IP-LL
Qty: 0
Precio: $ 2,519.95
Disponibilidad: En stock Condición: nuevo
Envío: a partir de $22.00 Garantía: 2 Yrs
preguntar por el producto
Enviar petición
Descripción Caracteristicas Dibujos Selección de modelo Especificación Apoyo
Descripción

Compact Dual HDMI, YPbPr, CVBS HDTV Coax Modulator, IPTV Encoder, and ASI Multiplexer

PN: H-2ADHD

Thor’s dual-channel compact encoder-modulators are designed for high-density digital HDTV channel generation. These systems accept video inputs in all standard HD or SD formats, including component, composite, or HDMI. Additionally, they support all other advanced functions typically found on larger 19-inch rack systems. Their compact form factor is intended for tabletop/desk-mount installations.

Supported features include HDCP support, closed captioning (608 on analog RCA), and independent audio input apart from HDMI for audio. For convenience, all functions can be set via a keypad and LCD display located on top of the unit. However, the ideal method for configuration is provided through any standard web browser. Two Ethernet network ports are provided: one for configuration and a second for IPTV output. IPTV output is available in the form of UDP unicast or multicast address outputs with two addresses for single program SPTS outputs and a single address for the combined multi-program MPTS stream.

For broadcasters, both ASI input and output are provided on BNC terminals. HDTV output is available on standard 75-ohm Type-F connectors with adjustable RF output power level. The H-2ADHD is also capable of modulating both standards of QAM and ATSC. Using the highly functional NMS GUI, you're capable of using either standard without reprogramming the unit. For more information, please contact a sales representative.

The unit can be used in various applications, performing the following tasks:

1) 2 HDMI, CVBS, or YPbPr to QAM, ATSC, DVB-T, or ISDBT modulated output,

2) 2 HDMI, CVBS, or YPbPr to IPTV UDP/RTP/RTSP multicast,

3) DVB-ASI to QAM, ATSC, DVB-T, ISDB-T,

4) DVB-ASI to IPTV,

5) 2 HDMI, CVBS, or YPBPr to DVB-ASI

 

Caracteristicas
  • Dual HD or SD channels in compact encoder modulator form factor
  • Supports both MPEG-2 or H.264 video encoding codecs
  • Supports Dolby AC/3 audio passthrough up 7.1 channels
  • Models available for ATSC, DVB-C, or DVB-T Television (unit comes loaded with QAM & ATSC modulation standards)
  • Supports IPTV output in UDP format for unicast or multicast
  • Supports EIA 608 type closed captioning on analog input
  • ASI input and multiplexing function provided with ASI output
  • 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
Dibujos
Selección de modelo

H-2ADHD-QAM-IPLL

H-2ADHD-ATSC-IPLL

H-2ADHD-DVBT-IPLL

H-2ADHD-ISDBT-IPLL

Especificación
*All Specifiactions Subject to Change Without Notice
Input
HD: HDMI & YPbPr up to 1080P60
SD: Analog Composite
 
Supported Resolutions
720x480P 60 / 59.94 / 50 Hz
1280x720P 60 / 59.94 / 50 Hz
1920x1080I 60 / 59.94 / 50 Hz
 
Video Codecs
MPEG-2 HD 1.5-19.5 Mbps
H.264 HD 0.8-19.5 Mbps
 
Audio Codecs
MPEG-1 Layer II
MPEG-2 AAC
MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough
 
Audio Sample Rate
48 kHz
 
Audio Bit Rates
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
 
Modulation Standard


ATSC, DVB-C (QAM64 QAM256) , DVB-T,  ISDB-T Standards are selectable from front panel,

Fimware update is not needed for each standard

RF Frequency Range
30-960 MHz 1 KHz Step
 
RF Power Level
5-35 dBmV Adjustable
 
DVB-ASI Output
BNC Connector: 1-60 Mbps
 
DVB-ASI Input
BNC Connector: 1-120 Mbps
Programs Selected by PID
Programs Muxed to all Outputs
 
IPTV Output
MPEG-TS MPTS over UDP
Unicast and Multicast Supported
 
Power Input
100-240 VAC Auto Switching
~ 20 W
 
Dimensions
13 x 9 x 1.75 Inches
 
Weight
9 Pounds
 
Operating Temperature
32-110 F
 
Productos similares:

MaximusControl - Professional Grade Video PTZ Controller Sale

The Thor MaximusControl is the essential accessory for your Thor PTZ Camera. This control center is a professional-grade video PTZ controller with built-in support for VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control can independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, allowing you to adapt and control cameras from various manufacturers using the same controller. It can simultaneously control PTZ functions for up to 7 different cameras and protocols.

MaximusLight Sale

Ultra HD Super Wide Field of View 110 degrees. A new generation of UHD CMOS image sensor, with more accurate native resolution, richer color data, and shooting 4K video with high-definition details. Standard 110-degree ultra-large viewing angle and low-distortion 4K lens, the panoramic field of view can be seen in any environment.

Contáctenos

Thor Broadcast Ventas


Servicio al Cliente / Soporte