PN: H-2ADHD
Thor’s dual-channel compact encoder-modulators are designed for high-density digital HDTV channel generation. These systems accept video inputs in all standard HD or SD formats, including component, composite, or HDMI. Additionally, they support all other advanced functions typically found on larger 19-inch rack systems. Their compact form factor is intended for tabletop/desk-mount installations.
Supported features include HDCP support, closed captioning (608 on analog RCA), and independent audio input apart from HDMI for audio. For convenience, all functions can be set via a keypad and LCD display located on top of the unit. However, the ideal method for configuration is provided through any standard web browser. Two Ethernet network ports are provided: one for configuration and a second for IPTV output. IPTV output is available in the form of UDP unicast or multicast address outputs with two addresses for single program SPTS outputs and a single address for the combined multi-program MPTS stream.
For broadcasters, both ASI input and output are provided on BNC terminals. HDTV output is available on standard 75-ohm Type-F connectors with adjustable RF output power level. The H-2ADHD is also capable of modulating both standards of QAM and ATSC. Using the highly functional NMS GUI, you're capable of using either standard without reprogramming the unit. For more information, please contact a sales representative.
The unit can be used in various applications, performing the following tasks:
1) 2 HDMI, CVBS, or YPbPr to QAM, ATSC, DVB-T, or ISDBT modulated output,
2) 2 HDMI, CVBS, or YPbPr to IPTV UDP/RTP/RTSP multicast,
3) DVB-ASI to QAM, ATSC, DVB-T, ISDB-T,
4) DVB-ASI to IPTV,
5) 2 HDMI, CVBS, or YPBPr to DVB-ASI
*All Specifiactions Subject to Change Without Notice | |
Input | HD: HDMI & YPbPr up to 1080P60 SD: Analog Composite |
Supported Resolutions | 720x480P 60 / 59.94 / 50 Hz 1280x720P 60 / 59.94 / 50 Hz 1920x1080I 60 / 59.94 / 50 Hz |
Video Codecs | MPEG-2 HD 1.5-19.5 Mbps H.264 HD 0.8-19.5 Mbps |
Audio Codecs | MPEG-1 Layer II MPEG-2 AAC MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough |
Audio Sample Rate | 48 kHz |
Audio Bit Rates | 64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps |
Modulation Standard |
Fimware update is not needed for each standard |
RF Frequency Range | 30-960 MHz 1 KHz Step |
RF Power Level | 5-35 dBmV Adjustable |
DVB-ASI Output | BNC Connector: 1-60 Mbps |
DVB-ASI Input | BNC Connector: 1-120 Mbps Programs Selected by PID Programs Muxed to all Outputs |
IPTV Output | MPEG-TS MPTS over UDP Unicast and Multicast Supported |
Power Input | 100-240 VAC Auto Switching ~ 20 W |
Dimensions | 13 x 9 x 1.75 Inches |
Weight | 9 Pounds |
Operating Temperature | 32-110 F |
Ultra HD Super Wide Field of View 110 degrees. A new generation of UHD CMOS image sensor, with more accurate native resolution, richer color data, and shooting 4K video with high-definition details. Standard 110-degree ultra-large viewing angle and low-distortion 4K lens, the panoramic field of view can be seen in any environment.
The SPARTAN-1 is an IP streaming device that comes equipped with a single input port capable of supporting HDMI, CVBS, and SDI inputs. It is specifically designed to facilitate MPEG4 AVC/H.264 video encoding and MPEG1 Layer 2, AAC, or AC3 audio encoding, ensuring high-quality video and audio output. Additionally, this device supports a range of popular streaming protocols such as UDP/RTP (Unicast/Multicast), HLS, RTMP, and HTTP in Low Latency, making it an ideal solution for streaming over local area networks (LAN) or over the internet.