This is 4 HDMI low latency LAN encoder and WAN streamer, utilizing H.264 encoding, AC3 or MPEG1 Audio encoding
It can be used as a 4 ch HDMI or 4ch CVBS, or a mix of both, IP streaming device. Ideally used for UDP/RTP multicast over LAN or It could be used as streaming device over public internet WAN using HLS, HTTP. RTMP
Easy to use and simple to setup; this single 1RU chassis has been designed to stream MPEG4 video directly to websites like Youtube and Facebook for streaming applications.
Low latency and minimal bit rate lets you stream up to 1080p quickly and efficiently through Thor Brodcast's newest multi channel encoder with procotols needed by most social media.
H-SPARTAN-4 4CH HDMI/CVBS/USB Video Audio encoder Streamer to IPTV; UDP, RTP, RTSP, HLS, HTTP, RTMP
Interfaces | |
Input | 4 x HDMI, 4 x CVBS, 1 x USB |
Output |
1 x RJ45, 1Gbps IP Streaming UDP/RTP (Unicast/Multicast) HLS, HTTP, RTMP |
Control | LCD with 6 keys & 1 x RJ45 (Web NMS) |
Video Encoding | |
Format | HD/SD :H.264 AVC/[email protected] |
Resolution | 1080 50/60p, 1080 50/60i 720 50/60p, 480i/576i Max output: 1080-30P |
Bitrate |
2~14 Mbps in UDP RTP 2~8 Mbps in RTMP, HLS, HTTP HDMI - 2-14Mbps CVBS- 2-6Mbps
|
Rate Control | CBR/VBR |
GOP Structure | IBBP |
Audio Encoding | |
Format | Mpeg1 L2, AAC, AC3 |
Bitrate | 64kps ~ 384kps |
Sample Rate | 44.1 kHz, 48.0 kHz |
General | |
Power Supply | AC 100~240V 50/60Hz |
Display | LCD panel @ 2 x 16 characters LED X5 (Ch1~4+USB) |
Dimension | 483 x 257 x 44.4mm |
Weight | 4Lb |
Environmental for operating |
Temperature: 5°C- 40°C Relative Humidity: 80% @ 30°C |
The Thor Broadcast H-2ADHD is a compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. Its easy-to-use NMS GUI interface allows you to adjust and manipulate any settings via any web browser, providing full autonomous control of the encoder. It supports full HD 1080p60 encoding from any source using HDMI. The H-2ADHD carries both modulation standards for QAM and ATSC, which are easy to switch between with a simple dropdown menu option inside the GUI. It supports QAM, ATSC, DVB-T, and ISDB-T modulations and is selectable.
The Thor MaximusControl is the essential accessory for your Thor PTZ Camera. This control center is a professional-grade video PTZ controller with built-in support for VISCA, SONY VISCA, and PELCO P/D multiple protocols. The Maximus control can independently select from Pelco-D, Pelco-P, Visca, and Sony Visca protocols. Each camera input can utilize a different protocol and baud rate, allowing you to adapt and control cameras from various manufacturers using the same controller. It can simultaneously control PTZ functions for up to 7 different cameras and protocols.