16 HDMI to Analog Agile CATV RF Modulator - NTSC PAL SECAM

Q: I am looking at a particular box that you sell, model H-16HDMI-RF-AMOD. I'm hoping to find someone who can tell me if that box is what I'm looking for, or if perhaps I should be looking at someone else. I'd like to use as much infrastructure as is currently in place for a non-profit. We have coax run to seven DirecTV boxes, which are attached to seven different TVs. I'd like to eliminate a few of those boxes, hook the rest up to HDMI (and preferably HD quality), and then distribute that out to the TVs using those different sources. Since there are so many TVs and there are plans to add more, in the future, I'm also curious to see if there is anything out there that has the ability to automate the on/off process for many different brand TVs so that the only remotes we would need to keep are DirecTV remotes, which we can control by running an IR repeater from the back room where the equipment resides out to a common area where changing them is easy

That device will work for your application, however this is an analog modulator, the otu0put quality picture will not be HD, even though the inputs can be HDMI. If you're looking for something that can take in HDMI, but also output HD quality in 1080 you should be looking at device like this https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239

Q: Whats the output resolution? Its not HD, will this work on 16:9 format TV?

This is a 16-channel analog NTSC, not digital HD QAM, modulator. The answer is yes if the TV supports an analog NTSC modulated signal; they usually do 99% of the time. It will display a 4:3 image on a 16:9 screen, so the sides of the screen will be black. If you need a digital full HD 16:9 modulator, please check out this 8-channel HDMI Thunder-8 unit. https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239

Q: I am looking to replace an RF Modulator for a client of mine. They currently have 12 DirecTV boxes that feed into a system via composite video. I am looking to upgrade to a system that will do HDMI inputs.

We have the perfect devices that will create digital full HD QAM channels, providing almost identical video and audio quality to the original HDMI sources. We specialize in HDMI modulator products. For your 12 channels, you could use 2 x H-THUNDER-8 units if you need some expansion room for the future or combine one 8-channel unit with a 4-channel unit (a more cost-effective solution). H-THUNDER-8 https://thorbroadcast.com/product/hdmi-modulator-qam-rf-coax-output-full-hd-8230.html/239 H-THUNDER-4 https://thorbroadcast.com/product/hdmi-modulator-qam-rf-coax-output-full-hd-8230.html/238 Combining multiple modulators is simple; you just need to select different channels on each one and use a simple 2x1 passive combiner.

Q: I was looking for the possibility of a device that could tune an RF (QAM) signal and assign a frequency to an HDMI output. One RF in, and some kind of interface that would allow me to assign signals/channels to multiple HMDI out ports. Basically it would be the reverse version of your H-16HDMI-RF-AMOD device. I cant seem to find any device on the market that could do that. Any insight is appreciated.

I understand what you are saying, but that is actually impossible since HDMI is just an AV cable; HDMI has nothing to do with RF. The only way you can do what you are saying is to use multiple RF decoder boxes with HDMI output. So you set the frequency or channel on the decoder and then have an HDMI output, that's how a set top box works. We have them for Clear QAM and ATSC available here: https://thorbroadcast.com/product/qam-catv-rf-and-atsc-rf-to-hdmi-decoder-stb-8230.html That 16 Channel HDMI to RF is an analog modulator in NTSC. Newer, HD modern signals are either Cable QAM or Antenna ATSC.

Model: H-16HDMI-RF-AMOD

Qty: 7

Promotion Ends!

Old price: ~~150~~

Precio: $1,995.00

Disponibilidad:	En stock	Condición:	nuevo
Envío:	starting at $0.00	Garantía:	2Yrs

Cantidad:

preguntar por el producto

Enviar petición

Descripción Caracteristicas Dibujos Models Especificación Q&A Apoyo

Descripción

This a terrific solution for taking in up to 16 HD HDMI signals from any source and modulate them into any agile analog channels. Simple and easy way to distribute high definition signals to legacy TV distribution systems. Comes equipped with a pre-programmed channel list and its ability to setup any of those channels anywhere in the spectrum, operators can set up the modulator quickly and efficiently.

This is particularly a unique modulator because most Analog Modulators on the market require CVBS input, in most cases the HDMI sources would need to be converted externally to CVBS.
Our device is doing it for you so you could use any SD/HD HDMI source, which then converts it internally to baseband video then modulates it to the Analog channels of your choosing.
This modulator is HDCP compliant and works with any HDMI sources and also comes with a network port for NMS, ethernet connection allows for remote access and management system.

Caracteristicas

Converts 16 independent HD/SD HDMI video and audio signals to analog NTSC or PAL / SECAM channels
Rack-mountable 1RU for easy insertion into any headend
High picture quality thanks to the 16 HDMI inputs
Internal fans - self-cooling system for long life span
HDMI is HDCP compliant
High power +50dBmv
16 Agile channels ouput
NMS network GUI for management via RJ45 port

Dibujos

Selección de modelo

H-16HDMI-RF-AMOD - 16 HDMI Inputs - 16 Analog RF Out (NTSC)

H-16HDMI-RF-AMOD-PAL - 16 HDMI Inputs - 16 Analog RF Out (PAL)

Similar model but with CVBS (baseband Video Audio -RCA) inputs:

H-16RCA-RF-AMOD - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator

H-16RCA-RF-AMOD-PAL - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator

Especificación

INPUT
Input Connector Management		HDMI x 16 Front Panel Buttons and LCD and NMS IP - 10/100 Ethernet, DefaultIP 192.168.1.30
VIDEO		Input Resolution		19201080_60P; 19201080_50P; 1920*1080_60i;
				19201080_50i; 1280720_60P; 1280*720_50P
OUTPUT
RF		Output Connector		F-Female @ 75ohms
		Output Frequency		45 ~ 870 MHz
		Output Level		110 dBμV = (+50dBmV )
		Adjust Range		0 ~ 20dB
		Output-band Rejection		≥ 60dB
GENERAL
Power Supply	AC 90 ~ 264V @ 47~63Hz		Power Consumption		<100W
Cooling Fans	3		Dimension		48.432.94.44 (CM)
Shipping Weight	6.5 KG		Carton Size		553913 (CM)

Question and Answers

Answer:

That device will work for your application, however this is an analog modulator, the otu0put quality picture will not be HD, even though the inputs can be HDMI. If you're looking for something that can take in HDMI, but also output HD quality in 1080 you should be looking at device like this https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239

Answer:

This is a 16-channel analog NTSC, not digital HD QAM, modulator. The answer is yes if the TV supports an analog NTSC modulated signal; they usually do 99% of the time. It will display a 4:3 image on a 16:9 screen, so the sides of the screen will be black. If you need a digital full HD 16:9 modulator, please check out this 8-channel HDMI Thunder-8 unit. https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239

Answer:
We have the perfect devices that will create digital full HD QAM channels, providing almost identical video and audio quality to the original HDMI sources. We specialize in HDMI modulator products. For your 12 channels, you could use 2 x H-THUNDER-8 units if you need some expansion room for the future or combine one 8-channel unit with a 4-channel unit (a more cost-effective solution). H-THUNDER-8 https://thorbroadcast.com/product/hdmi-modulator-qam-rf-coax-output-full-hd-8230.html/239

H-THUNDER-4 https://thorbroadcast.com/product/hdmi-modulator-qam-rf-coax-output-full-hd-8230.html/238

Combining multiple modulators is simple; you just need to select different channels on each one and use a simple 2x1 passive combiner.

Answer:
I understand what you are saying, but that is actually impossible since HDMI is just an AV cable; HDMI has nothing to do with RF. The only way you can do what you are saying is to use multiple RF decoder boxes with HDMI output. So you set the frequency or channel on the decoder and then have an HDMI output, that's how a set top box works. We have them for Clear QAM and ATSC available here: https://thorbroadcast.com/product/qam-catv-rf-and-atsc-rf-to-hdmi-decoder-stb-8230.html That 16 Channel HDMI to RF is an analog modulator in NTSC. Newer, HD modern signals are either Cable QAM or Antenna ATSC.