SDI over fiber, Video, Audio, Ethernet Over Fiber: Advanced Multiplexer Solutions

Description

PN : F-SUPERMUX-8

1~8 Channel Universal platform for multiplexing SD/HD 3G SDI, DVB-ASI, Analog CVBS Video, Analog Audio, AES/EBU Audio, RS Data, 10/100 and Gigabit Ethernet

It is designed as a modular system to support up to 8 3G/HD/SD-SDI, up to 4 gigabit Ethernet, up to 8 XLR interfaces for unidirectional analog audio or AES/EBU digital audio, up to 16 phoenix terminal groups for audio, RS232, RS422, RS485 and contact closure, up to 2 optical wavelength signal for outside device. It can be widely used in TV live broadcast, high-definition video conference, high-definition video monitoring, intelligent transportation system and public security system.

Tags: Fiber Optic Multiplexer SDI 3G with CWDM

Features

Compact design with 1U height, 19 inch, which can be installed on standard rack
Optical port
- Supports optical signal loss indication
- With APC circuit to achieve stable output optical power
- Two reserved optical ports for cascaded application. The available wavelength can be ordered.
- Supports FC/SC/ST-PC connector
SDI
- Supports 1485Mb/s and 270Mb/s, complying with SMPTE-292M and SMPTE-259M
- Supports DVB-ASI at 270M/b
- As an option, supports 2970M/b, complying with SMPTE-424M 3G-SDI
- SDI loop out and dual SDI output can be selected at the transmission and receiving terminals respectively
- Supports 1080P@60, 50, 1080P@30, 29.97, 25, 24, 23.98, 1080I@60, 59.94, 50, 720P@60, 59.94, 50, 30, 29.97, 25, 24, 23.98, and 625i, 525i
- With integrated SDI re-clocker and cable equalizer
- Built-in ESD and surge protection facility to prevent damage from external strikes
- Supports lock status indication of SDI input and output
DVB-ASI /SMPTE310
Serial data over 75-ohm coaxial cable at rates at or less than 270 megabits per second
Transmission of an MPEG Transport Stream MPEG2-TS / H-264-TS
75ohm BNC Connector
The 188 / 204 byte format supported

Gigabit Ethernet
- Complying with IEEE 802.3, auto negotiation for 10M/100M/1000M
- One RJ45 connector for one gigabit Ethernet, support auto MDI/MDIX function
- Indicators for LINK/ACT and bit rate status
Analog or AES/EBU Audio(XLR interface)
- Up to 8 balanced XLR interfaces
- Supports AES/EBU or S/PDIF audio format transparent transmit with bit rate of 3.072Mb/s
- Supports AES/EBU or S/PDIF audio lock status indication
Auxiliary service
- Phoenix terminal interface, every five terminals are used as a group and the service type can be configured for every group independently
- Supports audio, RS232, RS422, RS485 and contact closure
Provides dual power redundancy: AC220V/AC110V, DC-48V and DC+24V can be selected

Drawings

Model Selection

Part Number : F-SUPERMUX -X , ( X= 1 to 8 - the number of siganals multiplexed, - the number of optical CWDM wavelengths λ used )

Technical Specification

Item	Typical Value
SDI Interface
Connector	BNC
Bit rate	2970Mb/s, 1485Mb/s and 270Mb/s auto adaptive
Standard	Comply with SMPTE-424M 3G-SDI,SMPTE-292M HD-SDI and SMPTE-259M SD-SDI
Impedance	75Ω
Return loss	>15dB
Output level	800mVp-p±10%
Rise and fall time (3G-SDI)	≤135ps
Rise and fall time(HD-SDI)	≤270ps
Rise and fall time(SD-SDI)	≤1.50ns
SD-SDI alignment jitter (1KHz)	≤0.2UI
SD-SDI timing jitter (10Hz)	≤0.2UI
HD-SDI alignment jitter (100KHz)	≤0.2UI
HD-SDI timing jitter (10Hz)	<1.0UI
3G-SDI alignment jitter(100KHz)	≤0.3UI
3G-SDI timing jitter(10Hz)	≤2.0UI
Optical Interface
Connector	Optional SC / FC / ST-PC connector - (per request)
Distance	40Km
Receive sensitivity	-21dBm
Overload optical power	0dbm
Sending optical power	-3~+3dBm
Connector of cascaded ports	Optional SC/FC/ST-PC connector
GE Interface
Connector	RJ45
Frame length	From 64 to 2036 bytes
Default working mode	Auto-negotiation
Bit rate	10/100/1000Mb/s
Duplex	Half/full duplex
Flow Control	Enable as default
Standard	IEEE802.3ab 1000Base-T / IEEE802.3u 100Base-TX / IEEE802.3 10Base-T
Analog Audio Interface
Connector	Phoenix connector
Input impedance	10KΩ
Output impedance	75Ω
Sample rate	48KHz
Coding bits	24 bit
Input/output level	2Vp-p
RS485 Interface
Connector	Phoenix connector
Baud rate	0~115.2Kbps
Working mode	Bi-direction, half duplex
RS422/RS232 Interface
Connector	Phoenix connector
Baud rate	0~115.2Kbps
Working mode	Bi-direction, full duplex
XLR Interface
Connector	XLR
The maximum differential input level	+18dBu
Impedance	Input impedance : 2.2KΩ@1KHz
Power Supply
Power supply	AC220 /DC48 /DC24V
220VAC input voltage range	100~240V AC
48VDC input voltage range	36~72V DC
24VDC input voltage range	18~36V DC
Environment Requirements
Working temperature	-30~60°C
Relative Humidity	≤95%, no condensation
Storage temperature	-40~85°C
Mechanical Dimension
Dimension	482mm(L)×44mm(H)×250mm(W)

Note:

1. The default transmission distance is 40Km. Please declare when ordering if longer distance is required.

2. In order to prevent the damage of optical modules, an attenuator(10dB in general) must be inserted into the short fiber tail that sometimes used to connects the two devices for test purposes.

Slots on Rear Panel

MODULE	SLOT
Item	MAX	PWR1	PWR2	λSLOT	SLOT1	SLOT2	SLOT3	SLOT4	SLOT5	SLOT6	SLOT7	SLOT8
AC220V	2	YES	YES	NO	NO	NO	NO	NO	NO	NO	NO	NO
DC48V	2	YES	YES	NO	NO	NO	NO	NO	NO	NO	NO	NO
DC24V	2	YES	YES	NO	NO	NO	NO	NO	NO	NO	NO	NO
λ	1	NO	NO	YES	NO	NO	NO	NO	NO	NO	NO	NO
SDI or ASI IN	8	NO	NO	YES	YES	YES	YES	YES	YES	YES	YES	YES
SDI or ASI OUT	8	NO	NO	YES	YES	YES	YES	YES	YES	YES	YES	YES
XLR IN/OUT	4	NO	NO	NO	YES	YES	YES	YES	YES	YES	YES	YES
GIGABIT ETHERNET	4	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO
5 PIN INDUSTRIAL TERMINAL	4	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO

Specification

Interfaces on Rear Panel

Name	Description
OPT	Common optical interface, bi-directional, FC / SC / ST-PC can be selected.
λ1-λ2	Optional cascade optical interfaces, λ1-λ2 are wavelength division multiplexed into the common optical interface. The wavelength should be descript in the order item. The λ1 will be the shorter wavelength and the λ2 will be the longer wavelength.
SDI IN	3G/HD/SD-SDI input.
SDI LOOP	Optional 3G/HD/SD-SDI loop out.
SDI OUT1	3G/HD/SD-SDI output1.
SDI OUT2	Optional 3G/HD/SD-SDI output2.
ETH 10/100/1000M	Gigabit Ethernet
AUX1/AUX2	Auxiliary service interfaces. every five terminals are used as a group and the service type can be configured for every group independently including audio, RS232, RS422, RS485 and contact closure. See for details.
Power	Support 220VAC/110VAC,48VDC or 24V DC power supply. Any two of them can be selected and installed.
	~220V AC	~220V	AC power input. 100VAC~240VAC
	-48V DC	PGND	Earth ground (connects to the chassis).
		GND	Ground
		-48V	48VDC. 36VDC ~72VDC.
	+24V DC	PGND	Earth ground (connects to the chassis).
		GND	Ground
		+24V	24VDC power. 18VDC~36VDC.

Rear Panel

1-channel bi-directional RS422 AUX204(Transmitter)			Signal Direction	1-channel bi-directional RS422 AUX204(Receiver)
Description	No.	Pin Name	Signal Direction	Pin Name	No.	Description
Differential signal output A	1	OUTA		INA	1	Differential signal input A
Differential signal output B	2	OUTB		INB	2	Differential signal input B
Differential signal input A	3	INA		OUTA	3	Differential signal output A
Differential signal input B	4	INB		OUTB	4	Differential signal output B
Ground	5	G		G	5	Ground

Indicators on Rear Panel

Name	Description
LINK	Optical port status indicator. RED/GREEN. RED ON: Optical signal loss is detected at the port. GREEN ON: Normal.
PWR1,PWR2	Power1/Power2 indicators, GREEN ON: the power works normally OFF: the power is abnormal or absence.
LOCK	SDI input/output lock indicator, GREEN. ON: SDI input/output normal. OFF: SDI input/output abnormal.
ETH GREEN	Ethernet link/active indicator, GREEN. ON: Normal link but no data transmit or receive; BLINK: Normal link and there are data transmitting and receiving; OFF: No link or the interface is damaged
ETH YELLOW	Ethernet speed indicator, YELLOW. For ETH 10/100/1000M, ON: operating at 1000Mb/s OFF: operating at 100/10Mb/s

AUX on Rear Panel

AUX interface	No.	Pin Name	Description
2-channel bi-directional audio AUX213	1	OUT 1	Audio channel - 1 output	Use AUX213-AUX213 in pairs
	2	OUT 2	Audio channel - 1 output
	3	G	Ground
	4	IN 1	Audio channel - 1 input
	5	IN2	Audio channel - 2 output
4-channel unidirectional audio Input AUX211	1	IN 1	Audio channel - 1 input	Use AUX211-AUX212 in pairs
	2	IN 2	Audio channel - 2 output
	3	G	Ground
	4	IN 3	Audio channel - 3 input
	5	IN 4	Audio channel - 4 input
4-channel unidirectional audio Output AUX212	1	OUT 1	Audio channel - 1 output
	2	OUT 2	Audio channel - 2 output
	3	G	Ground
	4	OUT 3	Audio channel - 3 output
	5	OUT 4	Audio channel - 4 output
4-channel unidirectional audio Output AUX208	1	IN 1	Audio channel - 1 input	Use AUX207-AUX208 in pairs
	2	IN 2	Audio channel - 2 input
	3	G	Ground
	4	-	-
	5	-	-
2-channel unidirectional audio Input AUX207	1	OUT 1	Audio channel - 1 output
	2	OUT 2	Audio channel - 2 output
	3	G	Ground
	4	-	-
	5	-	-
2-channel contact closure Input AUX201	1	IN1	The first channel contact closure input	Use AUX200-AUX201 in pairs
	2	COM1	Command contact of the first channel contact closure
	3	IN2	The second channel contact closure input
	4	COM2	Command contact of the second channel contact closure
	5	-	-
2-channel contact closure output AUX200	1	OUT1	The first channel contact closure output No alarm: the contact is normally-closed (NC) Alarm: the contact is open
	2	COM1	Command contact of the first channel contact closure
	3	OUT2	The second channel contact closure output No alarm: the contact is normally-closed (NC) Alarm: the contact is open
	4	COM2	Command contact of the second channel contact closure
	5	-	-
2-channel bi-directional RS485 AUX204	1	A1	RS485 channel-1 differential signal A	Use AUX204-AUX204 in pairs
	2	B2	RS485 channel-1 differential signal B
	3	A2	RS485 channel-2 differential signal A
	4	B2	RS485 channel-2 differential signal B
	5	G	Ground
2-channel bi-directional RS232 AUX205	1	OUT 1	RS232 signal output 1	Use AUX205-AUX205 in pairs
	2	IN 1	RS232 signal input 1
	3	G	Ground
	4	OUT 2	RS232 signal output 2
	5	IN 2	RS232 signal input 2

Question and Answers

Question:
1-8 Channel flexible unit and modules for use from control room to press box building.

Answer:
For SDI we have two primary options: HD-SDI - mostly compact units and 3G-SDI CWDM which is rack mount. https://thorbroadcast.com/product/4-sdi-hdsdi-over-1-fiber-mini-extender.html These units use TDM for multiplexing and they have about a 20-40ms delay. https://thorbroadcast.com/products/sdi-sd-hd-3g-with-cwdm This is CWDM, and has 1ms delay. Both units are in stock and readily available for purchase. Let us know what custom setup you'd like to see and we can show you the cost breakdown. Let us know if you need anything else.

Question:

Thanks for the quote and quick reply. Can the supermux modules be changed by us, or is it permanent?
Can we achieve similar results using the F-CHASSIS? If so, can you quote that too? This unis is interchangeable by us right?

Answer:

I have since consulted with our engineering department, and they have confirmed that it is possible to change the Supermux modules.

To do this, you will need to open the top of the unit and unscrew the modules. Then, you can swap particular TX cards to the same slot as the corresponding RX on the other unit and reconnect the specific CWDM fiber to the SFP module.

For example, if the unit currently has 6 forward TX's + 1 return RX SDI, and in the future, you want to reconfigure it to 4 TXs / 3 RXs, you can swap the particular TX cards into the same slot as the corresponding RX on the other unit.

I hope this is clear.

Essentially, it is possible to change the modules, but it requires opening the devices and swapping the TX/RX PCB cards with their optical modules.

Question:

Is it possible to buy seperate units from you to install down the road? If let's say I need an extra ethernet ?

Answer:

Yes, we can provide separate units for future installation. However, please note that Ethernet can be tricky due to its bidirectional nature, utilizing two optical wavelengths. To install a second Ethernet port, you will need to remove two SDI ports, and we must match the CWDM wavelengths used by those SDIs.

Therefore, it might be more practical to order the unit with the exact configuration you need from the beginning.

Documents

f-supermux-8-optical-universal-cwdm-multiplexer-for-sdi-analog-audio-8230

Availability:	Check availability	Condition:	new
Shipping:	starting at $10	Warranty:	2Yrs

1~8 Channel flexible HD-SDI, Analog Video/ Audio, RS Data, Ethernet Optical MUX