The F-10GIG-MC is a 10 gigabit media converter and repeater for SFP or XFP based modules. Our two slot chassis is available for dual SFP or XFP modules. We also offer conversion from SFP to XFP and vise versa. Our media converters are a dynamic fiber conversion system and are protocol transparent for 10 gigabit links. Any 10 Gigabit SFP or XFP module can be used including copper standards such as 10GBASE-CX4 or 10GBASE-T for conversion to coax or twisted pair cabling. The F-10GIG-MC is ideal for applications such as linking a 10 Gigabit switch via copper to a fiber backbone, or for linking two copper connected 10 Gigabit servers over fiber. We also offer multiplexing solutions for WDM, CWDM, and DWDM. Please contact our engineering team for more details.
• Compatible with any available SPF or XPF compatible module
• provides transparent links within the 10 Gigabit range
• Ideal for conversion from one 10 Gigabit standard to another
• Provides solution for conversion of 10 Gigabit signals in between copper and fiber
• Supports 100% traffic throughput and has no restrictions on packet size
• compatible with 10 Gigabit Ethernet, 10G SONET/SDH, 10G Fiber Channel, and 10G OTN
|*All Specifiactions Subject to Change Without Notice|
||250,000 hrs. (estimated)|
||120 VAC, 60 Hz, 0.20 A|
||1"H x 3.1"W x 4.8"D (2.5 x 7.8 x 12.2 cm)|
||1 lb. (0.45 kg)|
||10GBASE-SR SFP+, Multimode LC (850-nm), 300 m (LSP-10G-MMLC)
10GBASE-LR SFP+, Single-Mode LC (1310-nm), 10 km (LSP-10G-SMLC10)
10GBASE-SR XFP, Multimode LC (850-nm), 300 m (LXP-10G-MMLC)
10GBASE-LR XFP, Single-Mode LC (1310-nm), 10 km (LXP-10G-SMLC10)
10GBASE-CX4 XFP, 15 m (LXP-10G-CX4)
10-GbE SFP+ to XFP Protocol-Transparent Fiber Converter, 2-Slot Modular Plug-In
10-GbE SFP+ to SFP+ Protocol-Transparent Media Converter, 2-Slot Modular Plug-In
10-GbE XFP to XFP Protocol-Transparent Fiber Converter, 2-Slot Modular Plug-In
Bi-directional 10/100 Ethernet Transport over one fiber (SC/PC), the Converter has 1 single fiber optic connector for transmitting at 1310nm and receiving at 1550nm, and one RJ-45 10/100 to 100FX Single Fiber WDM Media Converter. One Single Mode fiber will allow bi-directional transmission of data between Tx and Rx simultaneously of up to 20km. Units are labeled A & B; which is one set.
Transport of E1 or T1 carrier signals over fiber is possible with these units. Transport distances of up to 150 Km is possible with custom optics.