The Thor Broadcast H-HDMI-E/D is an IP Streaming Encoder/Decoder which uses H.264 protocol to extend HDMI video, IR and RS232 control signals over IP networks. It works with one control PC (Wake on LAN) and one switch whose transmission rate is 100Mbps or higher to control a variety of functions. The H-HDMI-E/D features 1080p HDMI video switching, video wall, video live preview, audio de-embedding, audio switching, IR&RS232 transmission, video recording, PoE, etc. The controlling software, “IP Streaming Management” merges all functions for you to control the IP streaming system.
H-HDMI-D Decoder
H-HDMI-E Encoder
One encoder and one decoder, multiple decoder and decoders can be used on the network, and using thor software, any video from any encoder can be routed to any encoder by simply moving the mouse
| Decodere | |
| Video-Input | HDMI IN |
| Video-Input Connector | Type A female HDMI |
| HDMI Input Resolution | Up to 1080p@60Hz 444 10/12bit |
| Video Output | HDMI Out |
| Video Output Connector | Type A female HDMI |
| HDMI Output Resolution | Up to 1080p@60Hz 444 10/12but |
| Control | RS232, IR In, IR Out, LAN (PoE) |
| Control Connector | 3-pin terminal block, 3.5mm jack, RJ45 |
| Encoder | |
| Video Output | HDMI Out |
| Video Output Connector | Type A female HDMI |
| HDMI Output Resolution | Up to 1080p@60Hz 444 10/12bit |
| Audio Output | Audio Out (L+R) |
| Audio Output Connector | RCA jack |
| Control | Storage, RS232, IR In, IR Out, LAN (PoE) |
| Control Connector | Type-A USB, 3-pin terminal block, 3.5mm jack, RJ45 |
| General | |
| Video ENcoding Standard | H.264 |
| CATx Cable Length | Up to 120 meters |
| External Power Supply | Input: AC 100-240V, 50/60Hz, Output 12VDC 1A, PoE |
| Power Consumption | Encoder: 4W(Max) ; Decoder: 3.5W (Max) |
| Operation Temperaturre | -5C° - +55C° |
| Storagge Temperature | -25C° - +70C° |
| Relative Himidity | 10% - 90% |
| Dimension (W*H*D) | 152.0mm x 21.0mm x 100.0mm |
| Net Weight | Encoder: 340g ; Decoder: 345g |
4K HEVC IP and USB HD Video Decoder - IP Stream Input to HDMI Output
The H-IP-HDMI is a Managed IP Video Decoder that can intake a TS signal and decode almost any incoming HEVC, H.265, H.264, and Mpeg-2 stream at up to 1920x1080@ 60fps and 3840x2160@ 30fps. It can decode various protocols including: IPv4/v6, TCP, UDP, HTTP, HLS, RTP, RTSP, RTMP, FTP, and IGMP(Multicast). This will allow you to interface and broadcast from all types of websites, encoders, servers and hosts; from YouTube to private UDP streams. Unit comes equipped with a GUI interface so you can access it remotely.
4 or 8 HDMI Inputs H264 Network Encoder UDP(Unicast/Multicast), RTSP, RTMP, HTTP, HLS
Real-time Network Encoder with 4 and 8 HDMI HDCP Compliant Inputs for IPTV Streaming. The unit has built-in IPTV server and supports multiple IP streaming protocols like UDP, RTSP, HLS, HTTP, RTMP, for direct steaming over LAN and WAN Supports full HD 480i / 720p / 1080i / 1080p and H.264 Video Encoding
ES
