This 2-channel CVBS system allows transmission of two different video sources over a single fiber.
Additionally, it enables control data to be sent from the receiver to the transmitter, allowing remote control of connected devices, like cameras, from the receiving end.
The base unit supports distances up to 20 km, with models available for extended ranges of 40, 80, or even 120 km.
The unit features two BNC connectors for video and a terminal block for RS485 data
Model Selection
F-2VD-TX / RX - CVBS forward + return RS485 Data over fiber TX/RX kit -20Km
F-2V-TX / RX - CVBS over fiber TX/RX kit - 20Km
40, 80,120Km vesions , XX=40,80,120 in Km
F-2VD-TX / RX-XX
F-2V-TX / RX-XX
| Video | |
|
8.0 MHz |
|
10 - bit |
|
1% typical |
|
1 typical |
|
>67 dB |
| Audio | |
|
20Hz ~ 20KHz |
|
24 - bit |
|
> 75 dB |
|
<0.1% |
| Data | |
|
RS-232/485/422, Manchester, Biphase |
|
Full-duplex/Half-duplex |
|
D<10-9 |
16 Ch Baseband Video and RS485 / RS422 / RS232 Over Fiber
16 Channel Baseband Composite video over fiber for the security industry
Analog VIDEO AUDIO DATA over fiber
A simple device for extending 1 or multiple Video's & Audio's with RS485 Serial Data over single mode or multimode fiber Stand-alone Analog Composite 1-32 CVBS Video with 2-64 Analog Stereo Audio and reversed RS 485 Data fiber optic transmitter and receiver kits allow you to transport and Video /Audio in one direction and be able to control the camera or another video device by RS485 data from the receiving location extend analog audio over single mode or multimode fiber. Perfect for monitoring, security, PTZ, surveillance, CCTV, or broadcast applications, Units can be used for timing application to send block burst over fiber or sync pulses over fiber
ES
