Convenient and compact HDMI to RJ45 converter's that can be used in a variety of applications for sending HDMI video over existing ethernet cables. Simple plug and play means you never have to waste time and energy setting up or troubleshooting the devices. Capable of sending your HDMI 2.0 signal up to 150m on Cat6 means these little powerhouse units can help you distribute content in offices, schools, airports, detainment centers, and conference centers. Utilized for top HD content, these units can go up to 4k resolution at 60 frames per second to keep your original content from being downscaled. Easily construct applications with one to one or one to many arrangements, with IR already installed you can use the receiving ends of these units to control the original source. These units will work on Cat5 up to about 120m and can be directly connected to switches, so with enough switches and relay's you can play these through vast environments with easy setup and installation.
H-HDMI-TX HDMI over Ethernet CAT5 transmitter with IR receiver
H-HDMI-RX HDMI over Ethernet CAT5 receiver with IR sender
Kits come with TX, RX power supplies and IR emitter and IR receiver
|Power consumption||TX:<8W RX:<10W|
|HDMI input resolution supported||
|HDMI output resolution supported||[email protected][email protected]/60Hz|
|Audio formats supported||L/R stereo audio|
|Maximum transfer rate||18Gbps|
|Input and output TMDS signal||0.7~1.5Vp-p(TMDS)|
|Input and output DDC signal||5Vp-p(TTL)|
|Input cable length supported||≤5m(AWG24)|
|Output cable length supported||≤5m(AWG24)|
|IR remote control||Supports IR passback with 20~60KHz frequency|
|Transfer method||Over UTP/STP CAT5/5e/6|
|Electrostatic protection of the whole machine||
1a Contact discharge level 3
1b Air discharge level 3
|Humidity (no condensation)||0~90%|
|Dimension||103(L) x97.5(W) x 24.8(H)mm|
|Material||Iron alloy material + crystal panel|
|Mean time between failures (MTBF)||>30,000 Hours|
10/100/1000Base-T to 1000Base-X or 100Base-X Flexible Fiber SFP Media Converters. The optics can be customized for transport distances of up to 150 Km.
Bi-directional 10/100 Ethernet Transport over one fiber (SC/PC), the Converter has 1 single fiber optic connector for transmitting at 1310nm and receiving at 1550nm, and one RJ-45 10/100 to 100FX Single Fiber WDM Media Converter. One Single Mode fiber will allow bi-directional transmission of data between Tx and Rx simultaneously of up to 20km. Units are labeled A & B; which is one set.