| Availability: | Check availability | Condition: | new |
|
| Shipping: | starting at $0.00 | Warranty: | 2Yrs |
Extend HD-SDI or SD-SDI and Network 10/100 Ethernet and RS Data /Analog Audio over single singlemode or multimode fiber
Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each and 10/100 Ethernet Full-Duplex over a single strand of fiber cable up to 20/40 or 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI-ET platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment.
Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology.
The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure.
Base Model F-M8SDI-ET -TX/RX support single mode fiber up to 20Km and it has ST/PC connector
|
Additional Model Selection : |
F-8MSDI-ET-TX/RX-XX-YY-ZZ-3G |
|---|---|
| F-8MSDI-ET-TX/RX-XX | XX = Optical connector : SC/PC , FC/PC (same price) |
| F-8MSDI-ET-TX/RX-XX-YY | YY = Fiber optic distance 40,60,80,100,120Km (add $) |
| F-8MSDI-ET-TX/RX-XX-YY-ZZ | ZZ = (MM) Multi-mode, (SM) Single-mode (same price) |
|
F-8MSDI-ET-TX/RX-XX-YY-ZZ-3G |
3G SDI supprted up to 3Gbps (add $) |
|
Addition Avialable Cards :(External Analog Audio, RS422, RS232) (add $)
|
|
|
*All Specifiactions Subject to Change Without Notice |
|||
|
HD-SDI, SD-SDI, or DVB-ASI (ASI only for specific model-please call) 0 - 1.5 Gbps Serial Digital Signal |
||
|
8 SDI 1 10/100Ethernet Fullduplex (RJ45 connector) |
||
|
> 380mVp-p |
||
|
75Ω |
||
|
BNC |
||
|
20Km (40, 60, 80, 100Km - specific models only) |
||
|
25×116×110 |
||
|
130 - 260 VAC @ 50-60 Hz |
||
|
<10W |
||
|
0 to +70 Degree |
||
|
0 to 95% |
||
|
ST/PC or ( SC/PC or FC/PC or LC PC or SC/APC or ST/APC or LC/APC) by request |
||
|
TDM or CWDM type |
||
|
Non-condensing |
||
|
|||
Multi Input HD Encoder - ASI and IP Output
Standard grade broadcast encoding from HD-SDI, HDMI, Component, Composite video signals with digital optical audio inputs. Supports outputs on mirrored ASI BNC terminals and IP TS network video output. All settings available on front panel or through web based network management.
2 mW CATV RF Over Fiber Tx 45-870 MHz
2 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.
ES
