Contact Closure over Fiber 2,4,8,16 one way or bidirectional

Thor Contact Closure Fiber Optic Converters -  Transmitter and Receiver kits that  allow you to send electrical signals over fiber optic cable.

This works exactly like a relay - electrical on/off switch than can be controlled from the transmitter to the receiver or in both directions, for example if we will close or short 2 pins on the TX side it will close it on the receiving side which allows the current to flow, so you can turn off or turn on any device remotly over fiber.

The base unit works for 20Km over single-mode fiber or 3000 feet  of multimode fiber - ST/PC fiber connectors

They are typically used in applications with Access Control System, Alarm Event Triggering, Building Automation, and Environmental Control Systems, Fire & Alarm Systems, PIR signal Transmission, Traffic Signal Control Equipment, etc, and are available for stand-alone or rack-mount installations. ST/PC is standard; please call or ask your representative about SC or FC optical connectors, we can supply optical converion cables.

Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status.

The base unit works for 20Km over single mode fiber or 3000 feet  of multimode fiber - ST/PC fiber connector

• Point-to-Point or Daisy-Chain connection

• Dry Contact Closure over one fiber

• Normally Open ON/OFF switch over fiber

• Multimode Fiber Supported for Distances up to 3000ft

• Single-Mode Fiber Support for Distances up to 20 km based model, other distances available for long haul (model dependent)

• LED Status Provides Real-Time Indication of Operating Parameters

• No EMI or RFI and no ground loops

• Stand-alone or (Rackmount - Model Dependent)
 

The base unit works for 20Km over single-mode fiber or 3000 feet  of multimode fiber - ST/PC fiber connector

F-2CC-TX/RX  2 Contact closures  over fiber transmitter/receiver kit 20Km

F-4CC-TX/RX  4 Contact closures  over fiber transmitter/receiver kit 20Km

F-8CC-TX/RX  8 Contact closures  over fiber transmitter/receiver kit 20Km

F-16CC-TX/RX  16 Contact closures or TTL over fiber transmitter/receiver kit 20Km

F-2CC-B-TX/RX  2 Contact closures  over fiber transmitter/receiver kit 20Km

F-4CC-B-TX/RX  4 Contact closures  over fiber transmitter/receiver kit 20Km

F-8CC-B-TX/RX  8 Contact closures  over fiber transmitter/receiver kit 20Km

Other configurations :

F-XXCC-TX/RX-YY

XX- Number of contact closure channels  2, 4, 8, 16, 32

YY- Distance in Km 40, 80, 100,

Notes:

• The Optical Power Budget data fits Mulit-mode(62.5/125 μm), Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
• Please feel free to consult Thor Fiber for any special requirement and customization
• Due to continuous improvement, all fiber optic transmission systems and video over fiber product specifications are subject to change without further notice.