The device takes the DVI output from a source (such as a computer or workstation) and converts it into a signal suitable for fiber optic transmission. Along with the video and audio data, RS232 control signals (such as keyboard and mouse inputs) are sent over the same optical fiber. At the receiving end, the signal is decoded back to DVI, and the RS232 data is used to extend control functions, enabling the remote user to interact with the system as if they were directly at the source.
The combination of video, audio, and RS232 data transmission over a single optical fiber makes these extenders highly efficient, providing both high-quality media transfer and remote control capabilities. The plug-and-play design and power supply make installation simple and hassle-free, making it a reliable solution for various professional and commercial applications.
F-DVI-TX/RX DVI to fiber extender
Optical Module |
Fiber optic channel |
1 channel |
Fiber connector |
LC |
|
Type of fiber |
Single-mode single fiber |
|
Band bandwidth |
10Gbps |
|
Signal standard |
Serial Digital Optical Signal |
|
Transmitting optical power |
-6dBm |
|
Receiving sensitivity |
>-13dBm |
|
Wavelength |
1270/1330nm |
|
DVI |
Physical interface |
DVI |
DVI channel |
1 channel |
|
Standard |
DVI 1.0 HDCP 1.4 |
|
Maximum pixel clock |
340M |
|
Output input rate |
FULLHD 10GbpS |
|
Support for resolution |
1920*1200 60Hz downward compatibility |
|
AC impedance |
100 ohms |
|
Signal amplitude |
0.8V vpp |
|
Signal coupling mode |
AC coupling |
|
DVI maximum cable length |
10m |
|
Data POWER Dimensions (L / W / H): |
Data channel 12V / 1A DC (power supplies included). 119mm / 104mm / 28mm |
One channel bidirectional |
The F-1MSDI-L-2TX is a mini Fiber Optic Transport unit that is utilized and extra loop out SDI connector on the transmitter for monitoring and for additional screening. The matching receiver F-1MSDI-L-2RX uses the same technology as the transmitter so you can actually have 2 SDI outputs on the receiving end of the Fiber. This allows for easy access to redistribute a primary Fiber Cable that needs to be split to two SDI outputs.
(SD/HD-SDI coax-to-fiber) throw-down converter. Transmit multi-rate SD/HD-SDI video, up to 1.485Gb/s, at extended distances up to 80Km over one strand of single mode optical fiber, better than a rattler. F-M1SDI transmitter and receiver kit for transporting HD-SDI, SD-SDI, or DVB-ASI digital broadcast video signals over fiber cable. Provides 1 channel of RS-485 control data over a return path from the Rx back to the Tx.