| Availability: | Check availability | Condition: | new |
|
| Shipping: | starting at $10 | Warranty: | 5Yrs |
The H-HDSDI-H264-E is a high quality H264 encoder for digital video broadcast. Featuring encoding bassed on the H.264/MPEG-4 AVC algorithm, the H-HDSDI-H264-E is capable of transporting high quality video at less than half the bit rate of encoders using older standards such as MPEG-2/H.263. The H-HDSDI-H264-E has several analog and digital video interfaces (CVBS, YPbPr, HD-SDI / SD-SDI, and HDMI) as well as several audio interfaces (RCA, XLR, HDMI, AES and EUB). The unit provides a network interface for transport over IP based networks as well as DVB-ASI outputs for a QAM modulator. The H-HDSDI-H264-E encoder is simple to integrate and has a cost effective design that gives users an excellent digital video encoding solution. Our units are widely used in broadcast television systems, terrestrial digital TV, and in image monitoring applications.
• H.264/AVC High Profile Level 4.0 and H.264/AVC High Profile Level 3.0 encoding support
• Advanced video pre-processing algorithms
• MPEG1 Audio Layer 2
• CVBS, S-Video, YPbPr analog video input support
• HDMI, HD/SD-SDI digital video input support
• AES/EBU, HDMI, HD/SD-SDI digital audio input support
• XLR (balance), RCA (unbalance) analog audio input support
• UDP media transmission protocols & unicast/multicast output support
• PAL, NTSC SD video format support
• 720P, 1080I HD video format support
• LCD / keyboard operating
• NMS support
|
1 × Analog CVBS, BNC interface 1 ×S-Video Analog YPbPr input, BNC interface 1 × YPbPr video input, BNC interface 1 x HD/SD-SDI, BNC interface 1x HDMI interface |
|
Analog stereo audio(balanced), XLR interface Analog stereo audio(unbalanced), BNC interface AES / EBU digital audio, XLR interface HD/SD-SDI embedded audio |
|
1920×1080_60i, 1920×1080_50i, 1280×720_60p, 1280×720_50p 20×480_60i(NTSC), 720×576_50i(PAL) |
|
AVC/H.264 High Profile Level 4.0 for HD AVC/H.264 High Profile Level 3.0 for SD |
|
0.8Mbps~20Mbps |
|
CBR/VBR |
|
BBP |
|
De-interlacing, noise reduction, sharpening |
|
MPEG-1 Layer 2 |
|
48KHz |
|
24-bit |
|
64Kb/s~384Kb/s |
|
2×ASI outputs, BNC interface SPTS over UDP, 10/100Base-T Ethernet interface UDP - Unicast / multicast |
|
LCD/keyboard operating, NMS support Ethernet software upgrade |
|
(W × D × H) 482mm×455mm×44.5mm |
|
4.5Kg |
|
0~45?(Operation), -20~80?(Storage) |
|
AC110V±10%, 50/60Hz AC 220V±10%,50/60Hz |
|
17.6W |
1-4 GPS over Fiber
This unit is for transporting GPS RF carrier signals over fiber for transport indoors or to non line of sight locations. Perfect for hangars, ships, or buildings. Provides a transparent and secure RF connection between your GPS antenna and receiver for distances from 100 ft to 20Km The GPS signal the frequency standard can generate very precise timing or sinewave outputs that are used in a variety of applications.
IPTV to 8, 16 or 24 CLEAR CHANNEL RF QAM/ATSC Modulator
CABLE TV Headend in a Box. QAM modulator for IP edge QAM applications. Each IP-QAM card can support up to 256 SPTS inputs(or 8MPTS) and output 8 independent RF QAM/ATSC channels. 3 Slot chassis can output up to 24 RF QAM channels - with 3 blade cards installed Also Available: 9 Slot chassis? that outputs up to 96 CATV RF QAM with maximum of 3072 individual IPTV programs
ES
