GIGABIT ETHERNET And RS-232 and RS-485 over single fiber Transceiver

Thor Fiber Multi-Serial (RS-232 / RS-485) + 2 x RJ45 Fiber Optic Converters that transmit a serial protocol over fiber with 2 ports for Ethernet transport. 

These units support single-mode and come with LC/P connectors. The serial port interface is a terminal block connector field wiring.

These units automatically detect the signal baud rate of the connected serial device that ranges from 300bps to 115.2Kbps baud. It also automatically adjusts to changes in the connected device’s bound during operation without reconfiguration or interruption of service.

This unit utilizes WDM optical multiplexing technology. Side A is equipped with a 1310nm transmitter, and Side B with a 11550nm transmitter. A complete setup requires both A and B units (sold as a pair).

          Point-to-Point Bi-Directional Transmission

• Zero-Delay Automatic Forwarding

• Transmission over Single (Simplex) Fiber

• Supports 2 Ports 10/100/1000 Gigabit Ethernet (10BASE-T / 100BASE-TX / 1000BASE-T)

• 2 x RJ45 Connectors (Managed)

• RS-232 and RS-485 to Fiber with Automatic Baud Rate Detection

• Baud Rate: 300bps to 115.2Kbps

• Protocol: Asynchronous Serial

• Supports Single-Mode, Single-Fiber with LC Connectors (Simplex)

• Distance: 20Km standard (40, 80, or 120Km available – model dependent)

• Hot-Pluggable

• Mounting Options: Chassis available, Wall-mounted, or DIN-Rail installation

• Protection: 1500W Surge Protection, 15KV ESD Protection

• Power Supply: External

• Operating Temperature: -40°C to +70°C

• Input Voltage: 9 ~ 48VDC

• Reverse Polarity Protection

• Compact Form Factor

EMI, RFI and Transient Surge Immunity

Electromagnetic interference (EMI) is a common phenomenon in typical environments like industrial plants, warehouses and factory floors. This interference can cause corruption of data over serial or copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise, thus preventing the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design.

Simplex fiber solution - A complete setup requires both A and B units (sold as a pair) - 20Km over single mode fiber

F-2GET-RS-A/B (A/B Link)

F-2GET-RS-A (A unit) 2 x Gigabit -10/100/1000 Ethernet + RS485 + RS 232 over 1 fiber transceiver fiber LC/PC connector -20Km (1310nm -TX, RX- 15510nm)

F-2GET-RS-B (B unit) 2 x Gigabit - 10/100/1000 Ethernet + RS485 + RS 232 over 1 fiber transceiver fiber LC/PC connector -20Km (1550nm -TX, RX-1310nm )

XX - Other Optical Distance - 40, 80, 120Km

                                                                       Dimensions : 4"x5"x1.25"