4 Satellite TV Polarities over single fiber via DWDM: EDFA Compatible
Modern Satellite TV systems such as DirecTV have multiple coax feeds from the dish for different polarities. These RF signals feed into a Single Wire Multiswitch, or SWiM system. The Thor F-LB41 systems are designed for distributing satellite service such as DirecTV to many different locations from a single dish array. This system converts each incoming L-Band feed to an independent optical RF channel using a DWDM optics. All four LNB channels are then combined onto a single fiber output through an internal DWDM coupler. Alternately, individual signal outputs can also be used for transport over 4 fibers. The combined DWDM optical output can then be run into an EDFA optical amplifier to boost the signal to high power levels. Once amplified it can be split through PLC couplers for fan type distribution. Thor F-LB systems are an effective solution for eliminating satellite antennas in residential developments. This platform can reduce a satellite farm down to a single dish and LNB. When used with EDFA amplifiers, a single Thor F-LB41 transmitter can deliver satellite TV service to over 1000 homes.
• Up to 6 RF feeds from satellite LNB's over a single fiber
• Wide frequency response 200-2700 MHz
• Compatible with multiple providers such as DirecTV
• Designed for use with Single Wire Multiswitch systems
• Up to 1024 end points from a single transmitter
| *All Specifiactions Subject to Change Without Notice | |||
|
4x Type-F 75 Ohm |
||
|
950-2400 MHz | ||
|
(-25) - (-14) dBmV | ||
|
4x DWDM 100GHz 1528-1563nm | ||
|
6.0 dBm (4mW) 8.0 dBm (6mW) Optional 10. dBm (10mW) Optional |
||
|
1x SC/APC | ||
|
4x Feedback Controlled DFB type DWDM | ||
|
12 dB | ||
|
25 dB | ||
|
RS-232 Serial SNMP Network Front Panel |
||
|
110 / 220 VAC Auto Switching | ||
|
>50 W | ||
|
482 x 268 x 44 mm | ||
|
3.5 kg | ||
|
0 - 65 C | ||
HD/SD-SDI HDMI 1080p50/60 Streaming Encoder and Decoder
Stream full HD include HDMI, Composite and 3G-SDI over LAN WAN from point to point solution
Professional HDMI to USB 3.0 HD Video External Capture Card
This USB 3.0 HD video capture card can receive audio from Line Audio, Optical SPIDIF, and Coaxial. The video can be delivered to your PC via USB 3.0 through the HDMI IN and run simultaneously go to a monitor or projector from the HDMI OUT port. This device allows you to capture uncompressed video with audio from a camera's HDMI output on your PC for editing, videoconferencing, recording, as well as, streaming application integration. No driver installation is needed and it should work with all motherboards with USB 3.0