40db CATV RF Amplifier Forward 54-1000MHz - Return 5-42MHz

Name: 40db CATV RF Amplifier Forward 54-1000MHz - Return 5-42MHz
Brand: Thor Broadcast
Price: 369.00 USD
Availability: InStock

Model: H-RF-AMP-40-RM

Qty: 8

Price: $369.00

Availability:	In stock	Condition:	new
Shipping:	starting at $0.00	Warranty:	5Yrs

Quantity:

ask about product

send request

Description Features Drawings Models Accessories Specification Support

Description

This amplifier makes an excellent distribution system amplifier for heavily loaded MDU and broadband CATV and SMATV systems. Because of its extremely low-noise figure and low distortion, the H-RF-AMP-40-RM is ideally suited for use in larger networks where amplifier cascading is required.

Applications:

- CATV RF QAM over coax amplification
- 40dB gain for off-air antenna ATSC / DVB-T / ISDB-T
- Analog RF - NTSC / PAL video amplification

Features

High output level, 40 dB
High-voltage surge protection
Broadband 54-1000MHz frequency range (Channels CATV 2-158)
High return loss against interference
Power LED indicator
Optimum for trunk distribution
Hybrid module design to obtain excellent quality
Adjustable gain and slope for fine-tuning systems
-20 dB test ports for easy troubleshooting
60 dBmV high output level
40 dB gain for optimal carrier-to-noise ratio and superior picture quality
+/- 0.5dB flatness across the band provides low distortion and excellent frequency response
Employs state-of-the-art hybrid push-pull technology for distortion-free audio-video quality
Adjustable slope and gain controls for easy system balancing
Easy-access controls and low-loss (-20dB) test point enable simplified setup and performance monitoring
Shielded enclosure provides over 95dB RFI shielding performance, reducing leakage and ingress
Built-in lightning and line-voltage surge protection protects the unit from damage

Drawings

Model Selection

H-RF-AMP-40-RM

Accessories & Upgrades

Specification

Bandwidth - CA-30/1000	54 ~ 1000MHz
Bandwidth - CA-30/550	54 ~ 550MHz
Gain (FWD) 54~1000 MHz	30dB
Gain (FWD) 54~550 MHz	30dB
Max. Output (158 ch.) (CA-30/1000)	40 dBmV
Max. Output (82 ch.) (CA-30/550)	43 dBmV
Flatness	0.5dB
Noise Figure (FWD) CA-30/1000	5dB
Noise Figure (FWD) CA30/550	4.5dB
Composite Second Order (FWD)	70dB
Composite Triple Beat (FWD)	61dB
Input Test Point Loss	20dB
Power Input	115VDC
Power Required	4Watt
Input Frequency Range	50~860 MHz
Output Max Level	60 dBmV
Maximum Gain	32 dB
Gain Control Range	0 ~ -20dB
Slope Control Range	0 ~ -20dB
Noise Figure	7.5 dB
Flatness	+/-2 dB
Return Loss	18 dB
Input / Output Impedance	75 ohm
Input / Output Test Point	-20 dB
Connectors	All "F" type female
Power Requirements	AC 110V or AC 220V
Power Consumption	10 W
Operating Temperature	-10 ~ 60 deg C
Size / Weight	WEIGHT: 4.4 lb BOX SIZE (IN): 21 x 8 x 3.25 in BOX SIZE (MM): 534 x 204 x 83 mm UNIT SIZE (IN): 19 x 6 x 2 in UNIT SIZE (MM): 483 x 153 x 51 mm

Documents

H-RF-AMP-40-RM - DATA SHEET

Thor Fiber Optical Mini FTTH RF CATV CABLE TV Receiver with Dual Coax Output

The Thor F-RF-RX-MN-2 is a compact fiber optic to RF receiver that converts an incoming optical signal into an electrical RF coax output. It is designed for systems carrying QAM, ATSC, DVB-T, and analog TV signals over fiber and then distributing them locally over standard 75-ohm coax networks.

4 Ch Cable TV Return Path Receiver

4 Channel Return Path CATV RF Optical Receiver 5-200Mhz, Fiber to Coax Excellent linearity and flatness Extremely good return loss >45 Automatic Gain Control Dual Power Supply Easy-to-read LCD display - RF & Fiber power level diagnostics Wideband 5-200 Mhz input range 1RU for easy installation Independent Return Paths Optical Range, AGC Range -10~0 Full Thor Fiber Warranty - No Worry Guarantee