| Availability: | Check availability | Condition: | new |
|
| Shipping: | starting at $0.00 | Warranty: | 2Yrs |
The H-ASI-E1 ASI to E1 adapter is designed to carry a DVB-ASI transport stream over 4 standard T1/E1 lines. This unit makes it possible to transmit a digital TV program signal through a telecom network. This is achieved by combining the 4 separate E1 lines into a single pipe for the ASI transport stream. This is useful for TV broadcast signal transport applications where an existing telecom network is present.
- Fully complies with G.703 standard
- Supports the two-way adaptation of E1 and MPEG-2 TS
- Supports FEC and RS ECC
- Supports the speed/burst self-adaptation of ASI
- Supports NMS
| *All Specifications Subject to Change Without Notice | |||
| Interface | |||
|
4xE1?, BNC interface?, 75? 2xASI?, BNC interface?, 75? |
||
|
1xIP, ?RJ45 interface?, 10/100M self-adaptation | ||
|
2xASI?, BNC interface?, 75? 4xE1, BNC interface?, 75? |
||
| Control | |||
|
DSNMS software | ||
| Miscellaneous | |||
|
483mm x 350mm x 44mm | ||
|
6kg | ||
|
90~264V | ||
| Environment | |||
|
10.5W | ||
|
0?~45? | ||
|
10~90% | ||
96x RF Modulator & Scrambler
QAM modulator for IP edge QAM applications. Each card can be configured with up to 10 IP addresses and port values, for a total of 30 IP inputs per chassis. Two groups of 4 adjacent QAM carriers are output per card, for a total of 24 QAM outputs.
1 Analog Video 2 Audio SD Digital TV Modulator QAM ATSC DVB-T 480i
High-quality MPEG-2 hardware SD encoder with QAM, ATSC, and DVB-T digital TV modulator.
ES
