Our H-AV-MPEG2-D decoder units are designed for professional quality head end decoding. Our units provide top of the line MPEG-2 decoding from one of three different input sources. The H-AV-MPEG2-D offers support for transport streams carried over Ethernet IP (UDP), DVB-ASI, or an optional DS3/E3. When decoding from an IP source the unit offers support for Unicast, Multicast, or Broadcast type streams. Outputs are provided by an SD-SDI signal with embedded audio with an optional second SD-SDI output, two component video outputs, and one S-Video output. Audio output is provided by two 2 analog balanced stereo outputs on XLR connectors with two optional AES/EBU outputs on BNC connectors. Our unit features integrated management provided by either SNMP or an embedded HTTP web server for remote monitoring and control. The H-AV-MPEG2-D is an ideal solution for all of your Broadcast quality DVB digital video decoding needs.
• 4:2:2 MP@ML, 4:2:0 MP@ML
• Configured and controlled through front panel, terminal and remote control unit
• VBI for Re-Insertion in Composite and SDI signals
• Redundancy support, GPI
• SDI with optional AES/EBU output
• IP input for transport over Ethernet Networks
• Linear PCM and Optional Dolby-E Pass-Through
Inputs | |
|
1 x ASI input 1 x ASI loop out 1 x DS3/E3 input (optional) |
|
1 x 10/100BASE-T Ethernet, RJ-45 UDP Protocol Supports Re-Transmission Supports Unicast/Multicast/Broadcast |
|
RS-232 Low Speed Data (Max 38.4Kbps) |
Outputs | |
|
Video Format: MPEG-2 4:2:0 MP@ML MPEG-2 4:2:2 MP@ML Optional 2 x CVBS (one for monitoring) 2 x SD-SDI identical with embedded audio 1 x S-Video (for monitoring) Video Format: PAL/NTSC |
|
2 x Analog Stereo (Balanced XLR) 2 x AES/EBU outputs (optional) Audio Format: MPEG-1 Layer I, MPEG-1 Layer II Sampling Frequency: 32KHz, 44.1KHz, 48KHz |
|
Front Panel Control 10/100BASE-T Ethernet control port, RJ-45 SNMP and HTTP control |
Physical | |
|
44mm x 483mm x 530mm (1.75" x 19" x 21") 1RU (19" Rack) |
|
4.5Kg (10lb) |
Power | |
|
100~120VAC or 220~240VAC |
|
<= 50W |
Environmental | |
|
5 C to 40 C (41 F to 104 F) |
|
-10 C to 70 C (14 F to 158 F) |
|
80% non condensing |
This unit is for transporting GPS RF carrier signals over fiber for transport indoors or to non line of sight locations. Perfect for hangars, ships, or buildings. Provides a transparent and secure RF connection between your GPS antenna and receiver for distances from 100 ft to 20Km The GPS signal the frequency standard can generate very precise timing or sinewave outputs that are used in a variety of applications.
Bi Directional Transport of DVB-ASI Transport Streams over a four T1 Carrier Line