The H-SDI-IP is a video gateway for video IP systems. It is often difficult and expensive to set up SD-SDI video transport links between remote sites and central locations. Our IP gateway offers an inexpensive and reliable method for transport of SD SDI video over existing Ethernet IP networks. The H-SDI-IP is an IP encapsulator, meaning that the SDI signal is carried over the IP packet based network. SDI signals have a high bitrate, typically 270 Mpbs for SD-SDI. Our H-SDI-IP unit transports the SDI signal uncompressed at the full bitrate. This will almost always require a network running at Gigabit Ethernet speeds. For applications where IP network bandwidth is more limited, we can compress the SD-SDI signal into an MPEG transport stream. This can reduce the bitrate down to around 15 Mbps without loosing quality. Contact our sales representative to determine which application best suites your needs.
• Fully complies with SMPTE 295M and 305M standards
• Supports uncompressed SD-SDI video and compressed SDTi video
• Transfers SDI data at full 270 Mbps rate
• All SD-SDI data is transported across the link including ancillary data
• simultaneous distribution of one video stream to multiple locations
• comprehensive management utility provides easy configuration
• Advanced network and status monitoring capabilities
• Clock frequency on receiver locked over Ethernet to frequency on transmitter
|
100/1000M BaseT, RJ45 interface |
|
Via web application interface |
|
BNC, 75 Ohm |
|
BNC, 75 Ohm |
|
12 VDC |
|
< 3.75 W |
|
220mm*145mm*40mm/0.6KG |
|
0°C to 40°C |
|
10-90%, non-condensing |
|
|
|
100/1000M, duplex/semi-duplex self-adaptive |
|
310 Mpbs |
|
Available |
|
Can customize for industrial users when required. |
SD Hardware Video Encoder with SD-SDI or Baseband video input and both DVB-ASI and IP outputs.
Thor model # F-16SDI-Tx and F-16SDI-Rx are standard configuration Fiber Optic Transmitters and Receivers for Serial Digital signals up to 3G-SDI running @ 3.0 Gbps. This system can be manufactured with any standard CWDM optics package, and internal passives are available by request. This is a 16 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol. Easy to read LED indicators for input signal detection and optical link are present for all channels. Since the SDI TX card and RX side are in modular format, we can configure them in an Input-Output configuration. For example, 8 inputs and 8 outputs over a single fiber