H-RF-SWITCH 2x1 redundant RF CATV 5 - 1000Mhz Switch
An RF switch is used for signal distribution redundancy or for remote RF switching. Our RF switch has two inputs and a single output. One of the inputs acts as the primary channel, while the second is used for failover protection. When the switch detects that the incoming RF to the primary channel has dropped below a set reference level, the unit will immediately switch to the backup channel. The unit can also be switched manually by either its front control panel or remotely via Ethernet SNMP. Our unit features full remote management for setting system parameters and system monitoring.
H-RF-SWITCH 2x1 redundant RF CATV 5 - 1000Mhz Switch
|
*All Specifications Subject to Change Without Notice |
|||
|
5~1000 | ||
|
50~130 | ||
|
60~120 | ||
|
<=0.5 | ||
|
AGC & MGC | ||
|
<=10 | ||
|
0.5 | ||
|
<=0.5 | ||
|
>=16 | ||
|
75 | ||
|
F-female, or by request | ||
|
RS232 | ||
|
RJ45 | ||
|
95~250VAC, Optional -48VDC(30~60VDC) | ||
|
10 | ||
|
5~65 | ||
|
-40~85 | ||
|
5~95 | ||
|
19x10.5x1.75(W)x(D)x(H) | ||
Previous generation style:

ASI to IP and IP to ASI converted with decoding to SDI and HDMI
Flexible gateway allowing the following conversions: ASI to IP, IP to ASI, and it can also decode IP or ASI inputs to video as SDI or HDMI simultaneously
1x16 DVB ASI Splitter and Distribution Amplifier
16-Channel DVB ASI Splitter / Distribution Amplifier with Re-Clocked Output 2 ASI Inputs, Each Input has 8 Outputs - Plug and Play