| Availability: | In stock | Condition: | new |
|
| Shipping: | starting at $0.00 | Warranty: | 1Yrs |
The F-2TEL is used for carrying analog phone over fiber fiber optic cable. Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using two of these devices, a telephone line can be extended over a fiber link. The F-2TEL provides full service for features like caller ID. The converter can be used in service mode, allowing connection of 2 telephone sets. The unit offers SNMP allowing remote management and sensing of converter status, type, version, fiber link status, RJ11 port status, and alarms. The F-2TEL is a RJ11 to Fiber Optic Converter with a simple and reliable solution for data carriers and service providers for Telephone over Fiber links.
• Extend telephone voice transmission from 2km to 120km over fiber
• Network management via terminal, web or SNMP
• Supports telephone voice transmission
• Supports caller ID pass through
• The Tx Transmitter) connects to FXS (telephone set/fax machine/dial-up modem)
• The RX (receiver) connects to FXO - ( (PBX trunk)
| Model Number | Description |
|
2 CH Telephone FXO/FXS Singlemode Fiber Transmitter and Reciever for 20km • The Tx Transmitter) connects to FXS (telephone set/fax machine/dial-up modem) • The RX (receiver) connects to FXO - ( (PBX trunk) |
|
2 CH Telephone FXO/FXS Singlemode Fiber Transmitter for 40km (please call 800-521-8467 ext 1) |
|
2 CH Telephone FXO/FXS Singlemode Fiber Transmitter and Receiver kit for 80km (please call 800-521-8467 ext 1) |
|
2 CH Telephone FXO/FXS Singlemode Fiber Transmitter and receiver kit for 120km (please call 800-521-8467 ext 1) |
| *All Specifiactions Subject to Change Without Notice | |||
| Optical Interface | |||
|
ST/PC | ||
|
MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km | ||
|
MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx, 1550Tx/1310Rx | ||
| Electrical Interface | |||
|
RJ-11 | ||
|
600 ohms, Coding : 16 bits liner, Loop Current : 10~100mA Ring Frequency : Acceptable 20 ~50Hz, Insertion Loss: 0.0 ± 1.0dB at 1000H |
||
|
Impedance : 600 ohms, Coding : 16 bits liner, Dial: DTMF and Dial Paul, Battery Source: 48VDC ± 4 |
||
|
Sine Wave | ||
|
20/25/30/50 Hz selectable | ||
|
FXS to FXS : On / 1 sec, Off / 2 sec | ||
|
Reproduces the cadence detected by FXO Insertion Loss 0.0 ± 1.0dB at 1000Hz REN: 4.0B(Ring Equivalence Number |
||
|
Power, FX Link, Phone Act, Test | ||
|
DC IN 12V | ||
|
5 W | ||
|
480mm x 225mm x 44mm | ||
|
0~50°C (Operating) 0~70°C (Storage) |
||
|
CE, FCC, LVD, RoHS | ||
|
125,000 h (25°C) | ||
16 Analog Telephone Lines over Fiber transceiver
Extend independent 16 phones over 1 fiber optic cable. 16 Channel telephones over fiber transceiver for secure telephone lines. These units transport the standard analog phone signal point to point over fiber optic cable and are impossible to tap.
4 Telephone Lines over Fiber
4 Channel telephone over fiber transceiver for secure telephone lines. These units transport the phone signal over fiber optic cable and are impossible to tap.
ES
