F-GET-TR-MM or F-GET-TR-SM (Dual Fiber transceiver; Duplex Connector)
The following illustrates typical applications for the F-GET-TR series. The actual distances will depend on several factors including the quality of cables used and the terminal equipment employed.
F-GET-TR-SM-20km -20Km F-GET-TR-SM-40km -40Km F-GET-TR-SM-80km -80Km version |
|
|
|
|
|
14 Slot Chassis available PN: F-Chassis -14 |
![]() |
|
SC/PC Duplex Connector |
||
|
IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standard |
||
|
10 K |
||
|
2000Mbps - Full Duplex |
||
|
850mm or 1310 nm or 1550nm or CWDM ( model -dependent) |
||
|
1000BaseFX: 1 x SC Duplex Connector |
||
|
3000 feet for multimode, 20km over single mode (40 or 80Km for singlemode long haul) |
||
|
-7 dBm for (40Km version) |
||
|
-0 Bm (80Km version ) |
||
|
DC 5V, 1.6A |
||
|
1000BaseT: 1 x RJ45 Connector |
||
|
-30.0 dBm for 80km version, -25dBm for 40Km version |
||
|
5 W |
||
|
0° ~ 50° C |
||
|
5% ~ 90% non-condensing |
||
|
71 x 97 x 26 mm(2.80 x 3.82 x 1.02 inches) |
||
|
0.6 Kg |
||
|
FCC Class A, CE |
||
|
11.0 dB |
||
|
Store and Forward |
||
|
-20° ~ 60° C |
Extend independent 8 phones over 1 fiber optic cable. 8 Channel telephone over fiber transceiver for secure telephone lines. These units transport the standard analog phone signal point to point over fiber optic cable and are impossible to tap.
Card Modules for Gigabit Ethernet, 10/100 Ethernet, T1/E1 Lines, or RS-232 for Fiber Optic Chassis System