2 Ch Gigabit Ethernet over Fiber

F-2G
Qty: 0
ask about product
send request
Description Features Drawings Model Selection Specification Documents
Description

Gigabit Ethernet Fiber Media Converter  - Unit was repleaced with : 

https://thorbroadcast.com/product/10-gigabit-ethernet-media-converter.html

-----------------------------

The F-2G is used for transporting two Gigabit Ethernet ports over fiber from one location to another using singlemode fiber. The units work in pairs with a transceiver on each end of the link. Any network cable connected to the RJ-45 port one one unit is transported to the corresponding RJ-45 port on the second unit. Our units work transparently, meaning they are non-IP addressable and any network traffic traveling through the the fiber link remains unmodified. Any two devices that are connected over the fiber link appear to be directly connected by a standard network cable. This is useful for connecting switches or other network devices in different buildings or for extending an IP network to a far away location. We also offer custom equipment to incorporate more signals onto a single fiber. In addition to Ethernet you can also carry video and audio channels, telephone lines, E1 or T1 links, or even satellite signals all over a single fiber. Our units have a maximum transmission distance of 120 km when used with singlemode fiber. We feature easy to read diagnostic LED's for continuous monitoring of link status and network speed. Contact a sales representative for more information.

Features

• 1000 Mbps Full Duplex Gigabit Ethernet over fiber Transceiver
• 2 x 1000BASE-FX LAN Fiber Port (multimode or singlemode optics)
• 2 x 1000BASE-FX WAN Fiber Port (singlemode optics 1310, 1550, CWDM, DWDM)
• 110km Transmission Range
• 1 or 2 Fiber Strand Transmission
• Full wire-rate 2000 Mbps Duplex Transmission for greater network performance
• Plug-n-Play Gigabit Ethernet Mode Converter or Singlemode Repeater
• IEEE 802.3z compliant
• Guaranteed Switch performance and hardware compatibility with other switches, hubs and adapters

Drawings
Model Selection
Model Number Description  
  • F-2GIG-Tx-MM
2 CH Gigabit Ethernet Multimode Fiber Transmitter for 2km  
  • F-2GIG-Rx-MM
2 CH Gigabit Ethernet Multimode Fiber Reciever for 2km  
  • F-2GIG-Tx-40
2 CH Gigabit Ethernet Singlemode Fiber Transmitter for 40km  
  • F-2GIG-Rx-40
2 CH Gigabit Ethernet Singlemode Fiber Reciever for 40km  
  • F-2GIG-Tx-80
2 CH Gigabit Ethernet Singlemode Fiber Transmitter for 80km  
  • F-2GIG-Rx-80
2 CH Gigabit Ethernet Singlemode Fiber Reciever for 80km  
  • F-2GIG-Tx-120
2 CH Gigabit Ethernet Singlemode Fiber Transmitter for 120km  
  • F-2GIG-Rx-120
2 CH Gigabit Ethernet Singlemode Fiber Reciever for 120km  

 

Specification
*All Specifiactions Subject to Change Without Notice
  • Standards

 

IEEE 802.3z 1000BASE-FX Gigabit Ethernet (F-1G)
IEEE 802.3ab 1000BASE-T (F-1G)

 

  • Connection Ports

2 Fiber Port Transceiver: SC/PC or SC/APC

  • Dimensions
480mm x 225mm x 44mm   
  • Environment

 

Operating temperature:    0°C to 50°C
Storage temperature:       -20°C to 70°C
Operating humidity:         10% to 90% RH
Storage humidity:            5% to 90% RH

 

  • Power Requirements
Voltage: 110/240V Auto-sense Internal Power
  • Registration
FCC Part 15 Class A, CE, UL, CUL, TUV
  • Network Media
62.5/125 microns muitimode fiber cable
  • LED Indicators
Gig E: Power, Link
Documents
Similar products:

JDSU SFP

Thor Fiber offers a variety of SFP modules that are compatible with many manufacturers including JDSU SFP's.

Cisco SFP

Thor Fiber offers a variety of SFP modules that are compatible with many manufacturers including Cisco SFP's.

Contact Us

Thor Broadcast Sales


Customer Service/ Support