F-2HD-TVI-TX/RX 2 HD-TVI /HD-CVI over fiber Transmitter / receiver kit - 20Km over single mode fiber / 2000feet of the multimode fiber
While many current video deployments are using newer digital transmission systems; legacy analog systems are still relevant and less expensive than their more current counterparts. Thor Fiber now has a full line of less expensive, commercial grade Video Over Fiber systems in easy to use kits. Electronic and optical adjustments are never required with these automated plug and play units. LED indicators are provided for instant monitoring of the system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environments. Compatible with AHD-H, AHD-M, AHD-L / HD-TVI 720P & 1080P / HD-CVI 720P & 1080P. The optical module and core circuit are high quality commercial level components that have unparalleled stability, and all optical & electrical interfaces match or exceed international standards.
Applications :
All surveillance applications
Security HD 1080p / 1080p cameras over fiber
Local Broadcast
Video conference
Camera feed to the Recorder
HD video over existing CATV coaxial network
An easy update to HD from CVBS SD cameras
Military
Government
Stores
Hotels / Motels
Video Channel: 2-ch unidirectional
Data Formats: 1-ch reverse RS485/RS422/RS232 (optional)
Transmission Distance: 20km on Singlemode Fiber
Fiber Type: Single-mode Simplex
CRAFT: Uncompressed technology VIDEO SPEC: 1080P
Supports HDTV highest resolution 1080P
10-bit digital video encoding and uncompressed transmission technology
High quality commercial grade
System status, power and other parameters are monitored via LED indicator lights
Compact size
Excellent cost performance
SMT Surface Mount Technology
Stand-alone or rack-mount
Lower power consumption
Plug and play convenience and simplicity
F-2HD-TVI-TX/RX 2 HD-TVI over one fiber Tranmsiter / receiver multiplexer kit - 20Km over single mode fiber / 2000feet of the multimode fiber
| Feature |
Description |
|
| Optical | Fiber Type | Single mode fiber |
|
Fiber Connector
|
ST/PC | |
| Distance | 20km singlemode (0km~80km)optional | |
| Wavelength | Transmitter | |
| T1310nm, R1550nm. | ||
| Receiver | ||
| T1550nm,R1310nm. | ||
| HDTVI(Transmitting) | Input Level | >500mVp-p |
| Desc | 1080p:75-=5 | |
|
coaxial cable, 300m |
||
|
720p:75-5coaxial cable,500m |
||
| Input/Output Impedance | 75 Ω | |
| Physical Interface | 2x BNC | |
|
HDTVI(Receiving) |
Output Level |
1Vp-p |
| Input/Output Impedance |
75Ω |
|
| Physical Interface |
2x BNC |
|
| Data | Transmission Media |
Coaxial cable |
| Baud Rate |
1200~9600bit/s |
|
| Operation Mode |
Half-Duplex;Full-Duplex;RS-232 |
|
|
Indicators |
LOS,PWR,VIDEO |
|
| Mean time between failures(MTBF) | >100 000 hours | |
| General | EPS | DC 5V |
| Power Consumtion |
≤ 5W |
|
| Dimensions |
W: 6 5/8" d: 4.5" h: 1.25" Depth mounting measurement: 2.5"
Width mounting measurement: 6.25"
|
|
|
HD-TVI vs HD-SDI
|
||
| HD - TVI | HD - SDI | |
| Video Resolution | 1080/720(Good) |
1080/720(Excellent) |
| Transmission Delay | No | No |
| Transmission Distance() | 500m | 150m |
| RS-485 Control over Coaxial | Yes | Yes, but need additional equipment |
| Coaxialcable quality requirement | High | Low |
| Transmission Reliability | High | Low |
|
|
HD-TVI vs IPC
|
|
| HD - TVI |
IPC |
|
|
Video Resolution |
1080/720P |
Unlimited |
|
Lossness Signal |
Yes |
No |
|
Transmission Delay |
No |
Yes |
|
Bandwidth Requirement |
Low |
High |
|
Transmission Distance(without Boost) |
0m |
100m |
|
Wiring and Installing |
A little more complex |
simple |
|
Unit Cost |
Low |
High |
|
|
HD-TVI vs HD-CVI
|
|
| HD - TVI |
HD-CVI |
|
|
Analog Output |
Yes |
Yes |
|
Coax cable distance(3C/5C) |
300m/500m(1000/1500ft) |
Same as HD-TVI |
|
Twisted CAble Distance |
200m(700 ft) |
100m(350 ft) |
|
720P specification supported(FPS) |
25/30/50/60/ |
Same as HD-TVI |
|
1080P specification supported |
25/30 |
Same as HD-TVI |
|
DVR could mix up 720P & 1080P signal at the same |
Yes |
No |
|
Chipset Solution |
Us Professional Third Party Chipset Vendor |
Dahua |
|
|
HD-TVI vs IP Camera
|
|
| HD - TVI |
IPC |
|
|
Video Resolution |
1080/720P |
Unlimited |
|
Lossness Signal |
Yes |
No |
|
Transmission Delay |
No |
Yes |
|
Bandwidth Requirement |
Low |
High |
|
Transmission Distance(without Boost) |
500m |
100m |
|
Wiring and Installing |
A little more complex |
simple |
|
Unit Cost |
Low |
High |
|
HD-TVI vs Analog
|
||
| HD-TVI | Analogue | |
|
Video resolution |
720P/1080P |
960H(700TVL) |
| Coax cable distance | 300/500m(1000/1500ft) | 180/300(600/1000ft) |
| Twisted cable distance (Cat5.e standard) | 200+m(700ft)(directly or + extra Balun) | 100m (330 ft) (+extra Balun) |
| 720P specification supported(FPS) | 25/30/50/60 | N/A |
| 1080P specification supported(FPS) | 25/30 | N/A |
| DVR Could mixed up 720 & 1080P signal at the same time | Yes | N/A |
| 960H Analogue | 1080P HD-TVI |
 |
 |
1 CVBS Video Only over fiber TX/RX kit
Compact Single Channel Analog Baseband (BNC) NTSC or PAL video over singlemode or multimode fiber
Analog VIDEO AUDIO DATA over fiber
A simple device for extending 1 or multiple Video's & Audio's with RS485 Serial Data over single mode or multimode fiber Stand-alone Analog Composite 1-32 CVBS Video with 2-64 Analog Stereo Audio and reversed RS 485 Data fiber optic transmitter and receiver kits allow you to transport and Video /Audio in one direction and be able to control the camera or another video device by RS485 data from the receiving location extend analog audio over single mode or multimode fiber. Perfect for monitoring, security, PTZ, surveillance, CCTV, or broadcast applications, Units can be used for timing application to send block burst over fiber or sync pulses over fiber
ES
