Availability: Check availability Condition: new
Shipping: starting at $10 Warranty: 1Yrs
ask about product
send request
Drawings Model Selection Specification Support
4 Ch CVBS Video + RS485 Data over fiber model description
Introducing the F-4VD-TX/RX 4-Channel Video Over Fiber System: This device transmits four separate CVBS baseband analog video signals in NTSC or PAL format over fiber, linking the transmitter and receiver seamlessly. It also supports bidirectional control data, allowing remote control of video equipment like cameras directly from the receiver end. Perfect for long-distance, high-quality video transmission with integrated control

Description

Fiber Optic Media Converter 4Ch Video

F-4V-Tx and F-4V-Rx  - 4 video over fiber

F-4VD-TX and F-4VD-RX 4 Video and return RS485 Data over fiber

Thor Fiber 4 Channel Composite Video over Fiber Transmitter and Receiver for easy transport of all your video over a single-mode (20km) or multimode(3000ft) fiber. 

There are many high-end security cameras out there that still shoot in the standard composite video.  Our line of F-SEC fiber transmitters is designed to extend the life of this equipment.   Our fiber optic security transmitters still use the same high-end 10-bit digital encoding that our broadcast transmitters use, just in a less expensive chassis.  We offer many different configurations and services with this line of products.  In addition to video, we can also carry data, Ethernet, telephone, or audio in the same unit.  Speak with a sales representative today to discuss specific options and pricing.  Our units come with standard single-mode optics with a transmitting distance of up to 20 km.  Other options for special wavelength optics and power outputs are available upon request. The F-4V-TX/RX is a 4 video over fiber TX/RX kit, the  F-4VD-TX/RX is a 4 Video in one direction, and an RS485 in the opposite direction TX/RX kit

Drawings

Model Selection

Model Selection

F-4VD-TX / RX - CVBS forward + return RS485 Data over fiber TX/RX kit -20Km

F-4V-TX / RX - CVBS over fiber TX/RX kit - 20Km

40, 80,120Km vesions , XX=40,80,120 in Km

F-4VD-TX / RX-XX

F-4V-TX / RX-XX

Specification

Video  
  • Bandwidth
8.0 MHz
  • Quantization
10 - bit
  • DG:
1% typical
  • DP:
1 typical
  • SNR:
>67 dB
Audio MODEL DEPENDENT: The base model does not support analog audio
  • Bandwidth Per Channel
20Hz ~ 20KHz
  • Quantization
24 - bit
  • SNR:
> 75 dB
  • THD:
<0.1%
Data  
  • Interface Type

Return unidirectional RS-485 - default on the F-4VD-TX/RX

(RS232/422 are available as a special order only)

  • Operation Mode
Full-duplex/Half-duplex
  • Data Rate
  • Dimensions

 

  • POWER

D<10-9

LxWxH 6.5 x 5.25 x 1.25 ( including connectors)

 

5VDC 1A Power supplies -incuded

Similar products:

Contact Closure over Fiber 2,4,8,16 one way or bidirectional Contact Closure over Fiber 2,4,8,16 one way or bidirectional

Digital Contact Closure Fiber Optic Converters series support 2 ~16 Channels simplex or 2~8 Channel duplex contact closure over one multi-mode or single-mode optical fiber.

Analog VIDEO AUDIO  DATA over fiber Analog VIDEO AUDIO DATA over fiber

A simple device for extending 1 or multiple Video's & Audio's with RS485 Serial Data over single mode or multimode fiber Stand-alone Analog Composite 1-32 CVBS Video with 2-64 Analog Stereo Audio and reversed RS 485 Data fiber optic transmitter and receiver kits allow you to transport and Video /Audio in one direction and be able to control the camera or another video device by RS485 data from the receiving location extend analog audio over single mode or multimode fiber. Perfect for monitoring, security, PTZ, surveillance, CCTV, or broadcast applications, Units can be used for timing application to send block burst over fiber or sync pulses over fiber

Contact Us

Thor Broadcast Sales


Customer Service/ Support