The Thor Broadcast Compact 40dB amplifier makes an excellent distribution system amplifier for heavily loaded MDU, broadband CATV, and SMATV systems.
Because of its extremely low-noise figure and low distortion, the H-RF-AMP-40 is ideally suited for use in larger networks where amplifier cascading is required.
CATV RF QAM over coax amplification, forward 54-1000MHz, and return path 5-42MHz
40dB gain for off-air antenna ATSC / DVB-T / ISDB-T
Analog RF - NTSC / PAL video amplification
H-RF-AMP-40
| Bandwidth-CA-30/1000 | 54 ~ 1000MHz |
| Bandwidth-CA-30/550 | 54 ~ 550MHz |
| Gain (FWD) 54~1000 MHz | 30dB |
| Gain (FWD) 54~550 MHz | 30dB |
| Max. Output (158 ch.) (CA-30/1000) | 40 dBmV |
| Max. Output (82 ch.) (CA-30/550) | 43 dBmV |
| Flatness | 0.5dB |
| Noise Figure (FWD) CA-30/1000 | 5dB |
| Noise Figure (FWD) CA-30/550 | 4.5dB |
| Composite Second Order (FWD) | 70dB |
| Composite Triple Beat (FWD) | 61dB |
| Input Test Point Loss | 20dB |
| Power Input | 115VDC |
| Power Required | 4 Watt |
| Input Frequency Range | 50~860 MHz |
| Output Max Level | 60 dBmV |
| Maximum Gain | 32 dB |
| Gain Control Range | 0 ~ -20dB |
| Slope Control Range | 0 ~ -20dB |
| Noise Figure | 7.5 dB |
| Flatness | +/-2 dB |
| Return Loss | 18 dB |
| Input / Output Impedance | 75 ohm |
| Input / Output test point | -20 dB |
| Connectors | All "F" type female |
| Power requirements | AC 110V or AC 220V |
| Power Consumption | 10 W |
| Operating Temperature | -10 ~ 60 deg C |
| Size / Weight | WEIGHT: 1.9 lb BOX SIZE (IN): 8.25 x 5.75 x 3 in BOX SIZE (MM): 210 x 147 x 77 mm UNIT SIZE (IN): 7.5 x 4.5 x 2.25 in UNIT SIZE (MM): 191 x 115 x 58 mm |
Compact Clam Shell Outdoor Weather Proof Fiber Optic Receiver For CATV 45-1000Mhz
Compact Clam Shell Outdoor Weatherproof RF CATV Fiber Optic Receiver 45-1000Mhz with dual RF F-Type connector outputs for easy distribution into any RF architecture design
COAX Cable Bi-Directional CATV RF Transmitter and Receiver over fiber - 45-1000Mhz Forward and Return Path 5-42Mhz
Coax Cable over fiber - Uniquely designed bidirectional CATV over Fiber Set. It was designed to replace point-to-point coax cable since CATV requires bi-directional communication, this transceiver units provide service over coax cable that has 2 different components (CATV + Internet)