8 HD-SDI Broadcast Encoder IPTV Streamer and ASI Out, H.264 / AC3 / 1080p

Qty: 0
Price: $ 6,995.00
Availability: In stock Condition: new
Shipping: starting at $22.00 Warranty: 2Yrs
add to basket
ask about product
send request
Description Features Drawings Model Selection Q&A Documents Support

H-8HD-EMS  HD-SDI Program Encoder

Real Time HD Video Encoder for 8 HD-SDI inputs to H.264 streams on ASI or IP outputs

This is an 8 channel HD SDI encoder for converting 8 channels off HD-SDI content input to ASI and IP outputs. Each of the 8 SDI encoders can be independently configured for bit rate and PID management. Encoding is based on high-level H.264 codec and bit rates up to 19 Mbps per channel are supported. This platform is ideal for reducing the rack space required for HD program encoding for content source origination and distribution. Ideally suited for CATV headend program aggregation or high-end CCTV systems. All encoded programs are multiplexed to multi-program transport stream (MPTS) outputs on both ASI and IP. Additionally, this unit is an SDI to IP encoder where single program transport stream (SPTS) outputs are provided for all inputs on the IP network output. All settings are available via the front panel as well as a web-based network management system. This SDI streaming encoder also provides a one channel ASI input that can multiplex 1 additional program to the outputs from an ASI source. This highly flexible HD video encoder dramatically lowers the cost per channel for real-time HD video encoding.

  • ,H-4HD-EMSReal Time H.264 Hardware Encoder with 8 HD-SDI Inputs
  • Independent control for encoding parameters on each channel
  • Provides all programs as MPTS outputs on both ASI and IP
  • Provides single program IP streams as SPTS IP Outputs over UDP/RRTP/RTSP
  • Includes ASI input for multiplexing an additional ASI program
  • Unit do not support CC ,only 1,2,and 4ch SDI unit supports it H-4HD-EMS ,H-2HD-EMS ,H-1HD-EMS
Model Selection

*All Specifiactions Subject to Change Without Notice


8 x HD-SDI, 1 x ASI

Supported Output Resolutions
1080p60, 1080p59.94, 1080p50
1080i60, 1080i 59.94, 1080i50
720p60, 720p59.94, 720p50
720i60, 720i59.94, 720i50
Video Codecs
MPEG-4 AVC/H.264
Audio Codecs
MPEG1 Layer 2
HD-AAC V2 (optional)
LC-AAC (optional)
Bit Rate
0.8 - 19.0 Mbps CBR or VBR
Advanced Video Features
Input Deinterlacing, Noise Reduction, Sharpening
Audio Sampling Rate
48 KHz, 24 bit resolution
Audio Bit Rate
64 - 384 Kbps Each Channel
IP Transport Stream Output
1 x MPTS and 8 x SPTS  over UDP, RTP/RTSP our (RJ45, 100M)
ASI Transport Stream Output
2 x ASI Multiplexed Output
Managment Interface
Web Based Browser Interface
Full Front Panel LCD Interface
480 x 455 x 45 mm
3.25 Kg
Operating Temperature
0°C - 45°C
Question and Answers
The encoder outputs multicast streams, The streams do not contain any IGMP information. The receiving IP devices support different IGMP types V2, V3, not the encoders. The IP receivers send IGMP V2/v3 to switch for a request which IP output from the switch You can set your switches to IGMP V2 or 3V
User's Manual is avalible only for logged users.
Similar products:


Thor IPTV Gateway is a device that is used for protocol conversion scenarios and streaming media distribution scenarios. Matrix converter between UDP, HLS, RTMP, HTTP, RTSP, and RTP.

1 Ch SDI or HDMI HD Encoder - MPEG2/H264

1 Ch HD-SDI or HDMI MPEG2/H.264 encoder that generates a multiplexed ASI & IPTV output formatted specifically for US Television standards. Supports closed captioning 708(SDI only) and Dolby Digital AC3 Audio Encoding for maximum efficiency and production.

Contact Us

Thor Broadcast Sales

Customer Service/ Support