Analog VIDEO AUDIO DATA over fiber

Name: Analog VIDEO AUDIO DATA over fiber - 1 Video 2 Audio + Data
Brand: Thorbroadcast
Price: 995 USD
Availability: InStock

1 Video 2 Audio + Data

2 Video 4 Audio + Data

4 Video 8 Audio + Data

8 Video 16 Audio +Data

16 Video 32 Audio + Data

F-1V2A-1D-TxRx

Qty: 0

Price: $ 995.00

Availability:	In stock	Condition:	new
Shipping:	starting at $22.00	Warranty:	1Yrs

Quantity:
add to basket

ask about product

send request

Description Features Drawings Model Selection Specification Q&A Support

1 Video 2 Audio + Data model description

1 Channel CVBS Composite baseband Video input - NTSC or PAL or SECAM, 2 channels Analog Audios and revered RS485 Serial Data Transmitter and Receiver Kit 2 Audios are independent and it can be used as a 1 balance or 2 unbalance Audios, 1 Stereo or 2 Mono Audios

Description

Analog Baseband Composite CVBS Video, Analog Audio, and RS485 Serial Data. These units are easy to control via data RS485 and are plug and play optical converters for helping to send video & audio longer distances. Sending Video and audio using copper wires for a longer distance than 100 feet is very unpractical. Fiber optic cable, Single-mode or multimode, helps tremendously. There are many cameras or other video devices like VCR, DVD players, Set Top Boxes still using analog Audio/Video interface. Our unit has a video BNC 75 ohm interface, for every video, there is double the amount of audios which can be used as single-ended or differential-balanced. For example, 1 video has 2 audios, 2 videos have 4 audios, essentially you have a video port with left and right audio. In addition, the Transceivers have an RS485 serial Data interface, it allows you to send commands to multiple camera's or other video sources from the headend - receiving location. The kit contains 2 pcs, Transmitter and Receiver, each comes with 12VDC power supply. The transmitter needs to be located by the Video / Audio source like a camera, the receiver needs to be located by the monitor or recording device. Units can be used for timing applications to send CVBS black burst over fiber or sync pulses over fiber.

Features

ST/PC fiber connector
BNC 75 ohm Video Connector
Terminal block for balanced and unbalanced audio
Terminal block for RS485 Data
Video supports NTSC, PAL, SECAM
Point to Point transmission up to 120Km (standard units 20Km on singlemode)
Singlemode or multimode fiber supported
LED indicators for Power and Optical ink
Stand-alone or rack mount blade available
Supports tri-level sync pulses
24-Bit Digitized Audio
10Mhz Video Bandwidth
Audio 600 Ω Unbalanced, -Bandwidth:20Hz ~ 20KHz
Audio Bit Resolution -24-bit Signal-to-Noise Ratio(SNR):> 80 dB
10-bit digitally encoded broadcast quality Video
12V DC Portable Power supply included
Short and long haul signal transport up to 120Km - model dependent

Drawings

Model Selection

F-XXV-YYA-1D-TX/RX-ZZ

XX -Number of Videos

YY -Number of Audios

ZZ-Distance in KM --- the default is 20Km on single mode fiber and 2000ft on multimode fiber (40, 60, 80, 120km upon request)

F-1V2A-1D-TxRx - 1 CVBS Video + 2 Unbalanced Uni-Directional Audios + Reversed RS485 Data over 1 fiber Transmitter and Receiver kit

F-2V4A-1D-TxRx- 2 CVBS Video + 4 Unbalanced Uni-Directional Audios + Reversed RS485 Data over 1 fiber Transmitter and Receiver kit

F-4V8A-1D-TxRx - 4 CVBS Video + 8 Unbalanced Uni-Directional Audios + Reversed RS485 Data over 1 fiber Transmitter and Receiver kit

F-8V16A-1D-TxRx - 8 CVBS Video + 16 Unbalanced Uni-Directional Audios + Reversed RS485 Data over 1 fiber Transmitter and Receiver kit

F-16V32A-1D-TxRx - 16 CVBS Video + 32 Unbalanced Uni-Directional Audios + Reversed RS485 Data over 1 fiber Transmitter and Receiver Simple

Specification

Video Interface Video Standard Video IN/Out level Number of Channels Audio Interface	BNC - 75Ω (1-32 Channels -Model dependent) NTSC, PAL, SECAM 1V p-p Video - 1-32 Channels, Audio 2 - 64, Audio Channels is usually twice the amount of Video Channels Terminal block
Audio input/output impedance	600 ohm - unbalanced
Audio Level voltage	up to 2V-pp
Audio Level	0 dBm
Audio bandwidth Video bandwidth Bit Resolution Data Formats Data Rate	10hz to 24.5khz 10MHZ supports tri-level sync pulses 10-Bit Digital Transmission RS485(2-wire or 4-wire) Up to 115.2Kbps
Sample Rates	48kHz
Digital bandwidth	24 bit
SNR	better than 79db
THD@1khz	1%
Optical connector	ST/PC ( other connectors available by request -extra $)
Optical fiber distance	The base unit supports 2000feet 50/125u, 62.5/125u multimode fiber and up to 20KM on - 9/125u single mode fiber (Other distances are available by request - extra$ )
Optical Wavelength	1310nm ( other -1550nm or CWDM are available per request- extra$)
Power	12V DC ( power supply included)
Power Consumption	3W
Power Adaptor	AC-90-240AVC / 5060HZ
Dimensions :	7" x 6.5" x 1"
Operating Temperature	-20°C ~ +75°C
Weight	1lb
MTBF	over 100,000 hours

Question and Answers

Question:

So one more clarification. With the F-1V2A-1D-TxRx.

We will be using this to transmit NTSC Black Reference Video and Analog LTC timecode audio to another location. So I would like to order 2 - TX/RX Sets. Can you please identify to wavelengths for Video and Audio TX on these devices? Meaning, if I have one unit TX and I optically Split the ST Fiber and then have Qty 2 RX Units at the same time. Can you confirm?

Answer:

Yes, you are correct. You can use the Transmitter F-1V2A-1D-Tx with a 1x2 or even a 1x4 optical splitter and connect it to 2 or 4 receivers F-1V2A-1D-RX's.

However, it will only be video forward. You will not be able to use reversed RS485 data. This is because if you send the 1550nm from different receivers, the TX will not be able to recognize the reversed signal.

If you intend to use reversed RS data, it would have to be used in a one-to-one configuration.