Convert your local AV and HDMI signal into an RF signal ready for distribution over coaxial cables to any amount of TV's on your network in MPEG2 Encoding that will work on any North American Television Set.
The modulator supports all cable and terrestrial standards. Easy to read LCD screen and simple push button controls means anyone can setup their own personal Cable QAM channel from any HDMI source in a matter of seconds.
Easy to use and plug and play for simplicity, compact design to tuck away anywhere near your headend. This simple digital HD Modulator has everything you need to launch your very private headend.
All RF modulation standards are built in, so no matter where you are in the world, there is a standard that will work in your country.
Furthermore this pocket size modulator also includes a AV inputs as well as an input for CC via CVBS in coordination with the HDMI input so you can still have Closed Captions and Dolby Digital AC3 Audio readily available when you need it. This unit includes a power supply and setup instructions that will have you watching your own personal CATV channel in no time.
AV and HDMI Input | ||||||
Video resolution Frame Ratio |
NTSC, PAL480i / 480p / 576i / 576p / 720p / 1080i / 1080p ( AUTO & EDID Controllable ) 23.97 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 FPS |
|||||
Video encoding | MPEG2 | |||||
Audio encoding | MPEG1 Layer II / AAC /AC3 | |||||
RF Output | +15 to +45 dBmV digitally fine-adjustable per each carrier/channel | |||||
Frequency Range | MHz | 50-950, 1K steps | ||||
Output level | dBμV | 100 (70-100 adjustable) | ||||
MER | dB | Typ. 35 | ||||
Output Setting | ||||||
Standard | ATSC | DVB-C/QAM Annex A, B C | DVB-T | ISDB-T | ||
Bandwidth | 6mhz | 8/6mhz | 6, 7, 8mhz | 6mhz | ||
Constellation | ATSC AIR 8VSB | 16QAM | QPSK | QPSK | ||
32QAM | 16QA | 16QA | ||||
64QAM | 64QAM | 64QAM | ||||
128QAM | ||||||
256QAM | ||||||
Other setting | Code rate | Symbol rate | Code rate | |||
Guard Interval | Guard Interval | |||||
FFT | FFT | |||||
General | ||||||
Power | 12 V 1A, Screw lock type adapter | |||||
Dimension | mm | 151x115x32 | ||||
Weight | lb | 1 | ||||
Menu Configuration | Video Input select / RF output type / RF range/ LCN, Key ID/ Service Name | |||||
Basic | ||||||
Advanced | Video & Audio/ SID / PMT, VPID, APID/ NIT, ONID/ PDS/ TS ID/ RF output attenuation |
This product takes the HDMI signal from your computer's graphics card and outputs digital RF signals like ATSC or QAM, not analog RF. You can scan your TVs, and it will find digital channels up to 1080p/60.
The only thing you need to check is whether your TVs support digital signals because it will not work with analog TVs. If you have an analog TV, we do have a solution, but it will never be in HD, just old analog RF.
To do that, we have Digital QAM/ATSC STBs with Analog RF NTSC Output Channel 3 or 4 that you can use as an analog RF source.
The Thor Broadcast H-2ADHD compact HDTV encoder modulator that outputs RF/ASI/IP simultaneously. Easy to use NMS GUI interface lets you adjust and manipulate any settings via any web browser for full autonomous control of the encoder. Supports full HD 1080p60 encoding from any source that uses HDMI. The H-2ADHD carries both modulation standards for both QAM and ATSC that are easy to switch between with a simple dropdown menu option inside the GUI. Supports QAM, ATSC ,DVB-T, ISDB-T modulations - it is selectable
Converts one or more HDMI digital video inputs to encoded MPEG-2 or H.264 streams. Outputs ASI, IP, & RF in QPSK DVB-T for European Television Systems. HDTV channel distribution over existing antenna coax cable for easy and simple implementation, HD 720p/1080i/1080p