Convert your local AV and HDMI signal into an RF signal ready for distribution over coaxial cables to any amount of TV's on your network in MPEG2 Encoding that will work on any North American Television Set.
The modulator supports all cable and terrestrial standards. Easy to read LCD screen and simple push button controls means anyone can setup their own personal Cable QAM channel from any HDMI source in a matter of seconds.
Easy to use and plug and play for simplicity, compact design to tuck away anywhere near your headed. This simple digital HD Modulator has everything you need to launch your very private headend.
All RF modulation standards are built in, so no matter where you are in the world, there is a standard that will work in your country.
Furthermore this pocket size modulator also includes a AV inputs as well as an input for CC via CVBS in coordination with the HDMI input so you can still have Closed Captions and Dolby Digital AC3 Audio readily available when you need it. This unit includes a power supply and setup instructions that will have you watching your own personal CATV channel in no time.
H-PCKT-MOD - HDMI with Closed Caprioning CC to CATV RF - QAM, ATSC, DVB-T, ISDB-T selectable modulation
(HDMI Pocket Modulator)
|AV and HDMI Input|
NTSC, PAL480i / 480p / 576i / 576p / 720p / 1080i / 1080p ( AUTO & EDID Controllable )
23.97 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 FPS
|Audio encoding||MPEG1 Layer II / AAC /AC3|
|RF Output||+15 to +45 dBmV digitally fine-adjustable per each carrier/channel|
|Frequency Range||MHz||50-950, 1K steps|
|Output level||dBμV||100 (70-100 adjustable)|
|Standard||ATSC||DVB-C/QAM Annex A, B C||DVB-T||ISDB-T|
|Bandwidth||6mhz||8/6mhz||6, 7, 8mhz||6mhz|
|Constellation||ATSC AIR 8VSB||16QAM||QPSK||QPSK|
|Other setting||Code rate||Symbol rate||Code rate|
|Guard Interval||Guard Interval|
|Power||12 V 1A, Screw lock type adapter|
|Menu Configuration||Video Input select / RF output type / RF range/ LCN, Key ID/ Service Name|
|Advanced||Video & Audio/ SID / PMT, VPID, APID/ NIT, ONID/ PDS/ TS ID/ RF output attenuation|
I want to know, this device can convert to RF signal a PC HDMI signal (Taken from the HDMI port of the graphic card) I want to know, because others products does not have that compatibility, and require a DVI to 3D modulator to do that conversion My idea is to take the hdmi signal from the graphic card and convert to analog air signal to be used in sixteen televisors (these has coaxial cable routed in the church and receiving in analog channel 3 the signal), but i want more image quality (in this HD era, 480 resolution is not good) Thanks for all the support and good products
This product takes the HDMI signal from your computer's graphics card and outputs digital RF signals like ATSC or QAM, not analog RF. You can scan your TVs, and it will find digital channels up to 1080p/60.
The only thing you need to check is whether your TVs support digital signals because it will not work with analog TVs. If you have an analog TV, we do have a solution, but it will never be in HD, just old analog RF.
To do that, we have Digital QAM/ATSC STBs with Analog RF NTSC Output Channel 3 or 4 that you can use as an analog RF source.
Convert 2X HDMI, 2X HD/SD/3G SDI with closed captioning to RF COAX or IP It generates 4 HDTV QAM Cable TV/ ATSC or DVB-T Channels. Supports MPEG2 /H.264 closed captions, Dolby AC/3 and comes equipped with ASI & IPTV UDP,RTP,RTSP Output. Create your own channels and watch any HD content on any TV, HD 720p/1080i/1080p
12 HDMI with CC (Closed Captioning) Broadcast Encoder IPTV Streamer and ASI Output