This amplifier makes an excellent distribution system amplifier for heavily loaded MDU and broadband CATV and SMATV systems. Because of its extremely low-noise figure and low distortion, the H-RF-AMP-30 is ideally suited for use in larger networks where amplifier cascading is required.
Applications:
- CATV RF QAM over coax amplification
- The 30dB gain from off air antenna ATSC / DVB-T / ISDB-T
- Analog RF - NTSC / PAL video amplification
H-RF-AMP-30
Bandwidth-CA-30/1000 | 54 ~ 1000MHz |
Bandwidth-CA-30/550 | 54 ~ 550MHz |
Gain (FWD) 54~1000 MHz | 30dB |
Gain (FWD) 54~550 MHz | 30dB |
Max. Output (158 ch.) (CA-30/1000) | 40 dBmV |
Max. Output (82 ch.) (CA-30/550) | 43 dBmV |
Flatness | 0.5dB |
Noise Figure (FWD) CA-30/1000 | 5dB |
Noise Figure (FWD) CA30/550 | 4.5dB |
Composite Second Order (FWD) | 70dB |
Composite Triple Beat (FWD) | 61dB |
Input Test Point Loss | 20dB |
Power Input | 115VDC |
Power Required | 4Watt |
Dimensions | 8” L) x 2.75” (D) x 4.5” (H) |
Weight | 2.3 lbs. |
Input Frequency Range | 50~860 MHz |
Output Max Level | 60 dBmV |
Maximum Gain | 32 dB |
Gain Control Range | 0 ~ -20dB |
Slope Control Range | 0 ~ -20dB |
Noise Figure | 7.5 dB |
Flatness | +/-2 dB |
Return Loss | 18 dB |
Input / Output Impedance | 75 ohm |
Input / Output test point | -20 dB |
Connectors | All "F" type female |
Power requirements | AC 110V or AC 220V |
Power Consumption | 10 W |
Operating Temperature | -10 ~ 60 °C |
16 mW Fiber Optic RF Transmitter for Television Carrier signals or any other RF in the 45-870 MHz band. Transmits full band signals with linear response.
Low Cost RF Fiber Break system for high security RF feeds. For short distance transport over fiber and for RF security to prevent any RF leaks. Prevents Coax from being used to transmit data in the return direction, using a Fiber Break Kit eliminates any possibility of your copper transmission returning on RF. Kit includes Transmitter, Fiber Jumper, and mini-Receiver.