The TX connects to PC or Blu-ray player for the HDMI, DVI, VGA source, the RX connects to display, speaker, microphone, and USB devices. The solution is based on the standard IP technology, the TX converts input signals (video, audio, USB, …) to IP packets and Multicast/Unicast to Gigabit Ethernet switch. On the other end of RXs, receiving IP packets from Ethernet switch then converts back to HDMI/DVI/VGA, Audio, USB… and send to display, speaker, USB devices. The Encoder/Decoder engine built with Scaler function, multiple RXs are flexible to be configured as Video-Wall displays. Perfect for AV Broadcasting, KVM Matrix Control, Video-Wall applications like informational displays, entertainment, boardrooms, courtrooms, medical, military, and education digital signage.
|DVI –I connector for HDMI/DVI-D/VGA input||1||N/A|
DVI-I connector for HDMI/DVI-D/VGA output
|Power||DC 9~32V, 15W||DC 9~32V, 20W|
1 x SFP Module with LC/SC connector, single core of SM/MM cable
|USB Upstream (to PC)||1 x USB-B||N/A|
|USB to Devices||N/A||2 x USB-A 2.0 + 2 x USB-A 1.1|
|IR remote control (option||1 x IR Blaster||1 x IR Receiver|
|Resolution||1080p or PC 1920 X 1200 @ 60Hz|
|Inter-connect Cable||Single Mode (3 KM), or Multi Mode (550 M) Optical Fiber|
|Storage Temperature||-20~ 85°C|
|Weight||453 g||458 g|
The H-IP-HDMI is a Managed IP Video Decoder that can intake a TS signal and decode almost any incoming HEVC, H.265, H.264, and Mpeg-2 stream at up to [email protected] 60fps and [email protected] 30fps. It can decode various protocols including: IPv4/v6, TCP, UDP, HTTP, HLS, RTP, RTSP, RTMP, FTP, and IGMP(Multicast). This will allow you to interface and broadcast from all types of websites, encoders, servers and hosts; from YouTube to private UDP streams. Unit comes equipped with a GUI interface so you can access it remotely.
The Thor Broadcast H-HDMI-E/D is an IP Streaming Encoder/Decoder which uses H.264 protocol to extend HDMI video, IR, and RS232 control signals over IP networks. POE