AUX204
Extend HD-SDI or SD-SDI digital video signals over long distances with single-mode fiber optic cable
Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI. The F-M8SDI platform delivers more functionality and performance of SDI to Fiber than has ever been available on off the shelf equipment.
Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate.This Unit provides a multiple SDI over Fiber channels, each one carries their own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology.
The 8 channel fiber multiplexer platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure.
Locking Cables
FC fiber & BNC connectors make sure that the
cable is not accidentally pulled out of the equipment
|
No Link Alarms
Link status alarm on both the transmitter
and receiver indicate when the link is not functional.
|
Serial Data
RS-485 return path sends serial data from the
receiver back to the transmitter for device control.
|
Base Model F-8MSDI-TX/RX support single mode fiber up to 20Km and it has ST/PC connector
Additional Model Selection : |
F-8MSDI-TX/RX-XX-YY-ZZ-3G |
---|---|
XX = Optical connector : SC/PC , FC/PC (same price) | |
YY = Fiber optic distance 40,60,80,100,120Km (add $) | |
ZZ = (MM) Multi-mode, (SM) Single-mode (same price) | |
|
3G SDI supprted up to 3Gbps (add $) |
Addition Avialable Cards :
(External Analog Audio, 10/100 Etherent, Gigabit Etherent, RS422, RS232) (add $)
Addition Available AUX Cards: - (External Analog Audio, 10/100 Ethernet, Gigabit Ethernet, RS422, RS232) (add $)
AUX cards selection:
AUX204
1-channel bidirectional RS422
AUX205
2-channel bidirectional RS232
AUX206
2-channel bidirectional audio
AUX207
2-channel unidirectional audio output
AUX208
2-channel unidirectional audio input
AUX211
4-channel unidirectional audio input
AUX212
4-channel unidirectional audio output
AUX201
2-channel contact closure input
AUX200
2-channel contact closure output
*All Specifiactions Subject to Change Without Notice | |||
HD-SDI Input |
HD-SDI, SD-SDI, (ASI supported only on the F-8ASI-TX, F-8ASI-RX CWDM model) 0 - 1.5 Gbps Serial Digital Signal |
||
Number of Input | 8 SDI 1 RS-485 2 Auxiliary |
||
Signal Level | > 380mVp-p | ||
Impedance | 75Ω | ||
Connector | BNC | ||
Distance | 20Km (40, 60, 100Km Available ) | ||
Mini box | 25×116×110 | ||
Power Supply | 130 - 260 VAC @ 50-60 Hz | ||
Power Consumption | <10W | ||
Temperature | 0 to +70 Degree | ||
Humidity | 0 to 95% | ||
Connector | ST/PC or ( FC/PC or SC/PC or SC/APC optional) | ||
Optical Channels |
TDM Multiplexing | ||
RH |
Non-condensing | ||
LED Status Indic |
The H-8MSDI-TX/RX is a perfect and convenient solution for transporting up to 8 HD/SD-SDI signals over a single fiber optic cable. The unit supports SDI up to 1080i/59.94/60Hz.
If you need support for SDI up to 3G SDI, which is 1080p/59.94/60Hz, we have a CWDM solution available. In this solution, each SDI signal is converted to its own optical wavelength using separate lasers and then combined together over one fiber. However, please note that due to the requirement for 8 wavelengths, the solution, the F-8SDI-3G-TX/RX, is more expensive. You can find more information about it here: Link to CWDM SDI Solution.
Unfortunately, we do not offer demos, but we do have a 30-day return policy. In any case, if the devices do not work for you, you can return them for a full refund.
We specialize in Fiber Optic signal transport and optical multiplication. Our devices are widely used in many stadiums, including exclusive use by the bigest Hhockey, footbol and socer organizations
Thor Fiber DVI over single fiber to video/audio/data comes as a set with a transmitter and receiver with 2 power supplies.
The F-M1SDI-TR-ET is a high performance, reliable, 1-channel bidirectional HD-SDI video optical transceiver + 10/100 Ethernet transceiver over the single fiber which performs in real-time, loss-free, and high-quality SDI video and Ethernet transmission over an optical single-mode fiber.