Tune and Demodulate 4 RF carriers (channels and sub-channels), re-multiplex with ASI & IP; output ASI & IP
Thor H-IRD-V4 system has 4x independent RF tuner inputs. Several different RF tuner cards are available - Satellite - DVBS/S2, off Air ATSC, DVB-T, ISDB-T and Cable TV QAM (model dependent)
Each input can be set to a different RF channel. The IRD will scan selected channels and discover all Video programs (subchannels) inside the channel.
Program streams from all four tuners as well as the IP and ASI inputs can be multiplexed and remapped in any order. Independent output pipes for IP / ASI and RF QAM are fully configurable.
The unit has a MUX option and each video program from the RF input and can be selected for output as :
1 ) IP TS (MPTS) multicast / unicast output (RF to IP applications)
1) CATV RF QAM Channel (RF to QAM applications)
2) IP TS (MPTS) multicast / unicast output (RF to IP applications)
3) ASI (MPTS) output- (RF to ASI applications)
The unit has 4 CAM slots for Satellite (DVB-S/S2) encrypted channels. Industry standard support for Conditional Access is provided by 4 Common Interface (CI) slots. These slots support CAM modules such as CableCard or any other system using the PCMCIA interface. In addition to descrambling programs from the RF tuners, the CAM system can also decrypt transport streams from the IP & ASI interfaces.
Depending on the Operator, the required CAM Module could be, NDS VIDEOGUARD, CONAX, IRDETO, NAGRA VISION, etc.
This platform is ideal for program aggregation and multiplexing in cable TV headends and corporate MATV systems. Full configuration and management are available on the front panel LCD and keypad, and remote access and monitoring are available on a dedicated NMS network port for control through a web browser.
H-IRD-V4 - 4 x DVB-S/S2 tuners to IP, ASI and 4 QAM
H-IRD-V4-ATSC - 4 x ATSC tuners to IP, ASI and 4 QAM
H-IRD-V4-QAM - 4 x QAM tuners to IP, ASI and 4 QAM
H-IRD-V4-DVB-T - 4 x DVB-T tuners to IP, ASI and 4 QAM
H-IRD-V4-ISDB-T - 4 x ISDB-T tuners to IP, ASI and 4 QAM
Input |
4 RF Tuner and 2 ASI inputs |
||
Tuner Section
|
|
|
950-2150MHz |
|
2-45Msps |
||
|
-65~-25dBm |
||
|
1/2, 2/3, 3/4, 5/6, 7/8 QPSK |
||
|
|
950-2150MHz |
|
|
QPSK 1~45Mbauds 8PSK 2~30Mbauds |
||
|
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 |
||
|
QPSK, 8PSK |
||
|
|
|
30-999Mhz |
|
ATSC A/53 |
||
|
8VSB |
||
|
/42 |
Multiplexing |
|
128per input channel |
||
|
PID remapping (automatically or manually) |
|||
Accurate PCR adjusting |
||||
Generate PSI/SI table automatically |
||||
Modulation Output |
|
|
J.83A, J.83B, J.83C |
|
|
≥42dB |
|||
|
30~950MHz, 1KHz step |
|||
|
-30.0~ 0.0 dbm (77~107 dbµV), 0.1db step |
|||
|
2.5 – 4.66 Msps, 5.0 - 8.0 Msps |
|||
|
Constellation |
16/32/64/128/256QAM |
||
bandwidth |
8M |
|||
|
Constellation |
64QAM, 256QAM |
||
bandwidth |
6M |
|||
|
Constellation |
64QAM, 256QAM |
||
bandwidth |
6M |
|||
System |
|
LCD + control buttons |
||
|
Web NMS |
|||
|
2 ASI out(BNC type) |
|||
IP (4*MPTS over UDP) out (RJ45, 1000M) |
||||
|
Web and USB |
|||
General |
|
19x17x2 19"Rack mountable 1RU |
||
|
3.7kg |
|||
|
0~45?(Operation) ; -20~80?(Storage) |
|||
|
AC 100V±1050/60Hz; AC 220V±10%, 50/60HZ |
|||
|
25W |
This is a Family of products equipped with 16 RF Tuners, tuners could decode the following: QAM Annex A&B, DVB-T, DVB-T2, ISDB-T; model dependent units ATSC, DVBS/S2 The unit works as an RF to IP Gateway and can output IP SPTS Multicast or Unicast CONVERT 16 CATV RF to IP
8 x ATSC Antenna Tuners to IPTV 8 x CABLE QAM Tuners to IPTV 8 x Satelite DVB-S2 Tuners to IPTV 8 x DVB-T Tuners to IPTV 8 x ISDB-TTuners to IPTV